tmshort
Well-known member
I have (had, I guess) a bathroom in my 24x36 when I bought the place 10+ years ago. It was a disaster, very poorly done, and I gutted it about 4-5 years ago with the intent of redoing it. Still a bare space.
It sits in one corner of the downstairs, and is roughly 80x73”. I am redoing everything, including cutting the floor to move the toilet flange. The guy who built the place set it too close to the wall, and the toilet that was in here had a cutout in the drywall for the tank to fit up against the studs. So, I can plumb in whatever is needed for sink / toilet / etc.
I’m interested in opinions on best design and for do’s / don’ts for a shop bathroom.
My goals:
- huge sink
- crapper
- urinal
- some sort of hot water, I am not sure on the best option for this. All electric, and I am detached ~75’ from the house.
Here are a couple drawings I have made trying to think this through. I have in mind a 72” wide double bowl stainless restaurant type sink, with work areas to the side of the bowls. I am not an artist / architect, so excuse the crude drawings:

”T” is toilet, “U” urinal. The door is currently in that location but could be moved anywhere along the left or bottom wall (the other 2 are exterior walls). I am already down to studs in there so moving the door is not a huge additional project.
Thanks in advance for your thoughts and advice.
It sits in one corner of the downstairs, and is roughly 80x73”. I am redoing everything, including cutting the floor to move the toilet flange. The guy who built the place set it too close to the wall, and the toilet that was in here had a cutout in the drywall for the tank to fit up against the studs. So, I can plumb in whatever is needed for sink / toilet / etc.
I’m interested in opinions on best design and for do’s / don’ts for a shop bathroom.
My goals:
- huge sink
- crapper
- urinal
- some sort of hot water, I am not sure on the best option for this. All electric, and I am detached ~75’ from the house.
Here are a couple drawings I have made trying to think this through. I have in mind a 72” wide double bowl stainless restaurant type sink, with work areas to the side of the bowls. I am not an artist / architect, so excuse the crude drawings:

”T” is toilet, “U” urinal. The door is currently in that location but could be moved anywhere along the left or bottom wall (the other 2 are exterior walls). I am already down to studs in there so moving the door is not a huge additional project.
Thanks in advance for your thoughts and advice.





