Hi guys. I've been lurking and working on my pole barn for 5 years now. Finally ready to show some pics.
Barn is 42'x38'x14'-6" ceilings. I've got 8" thick concrete with 2 tons of rebar in it (overkill)
(1) 12'x12' overhead door
(1) 9'x8' overhead door
Bathroom and sink with hot water
Finished walls. 6" fiberglass insulation in the walls, plus 1-1/2" foam under the exterior tin. 14" blown in insulation in the ceiling.
Let's see how good I can illustrate this.
10k dammar Hoist with toolboxes. Right behind this pic is the 9x8 door.
This pic is right inside the service door. Heavy duty work bench ,fridge and torches.
Another pic just past the fridge. Torches, battery charger etc. I love the Rubbermaid fastrack!
Bathroom in the corner
Sink to the left of the bathroom.
Toolboxes
Cabinet and file cabinets. Oil, paint and filters and such.
Mustang, boat motor.... Tire changer in the back corner.
Loft for misc storage. My 60 gallon air compressor is in the rear corner and piped in throughout the shop.
Switch for the air compressor on/off is conveniently located right by my toolbox. That was actually a pain to install it so far from the compressor. 4 hose reels throughout the shop (in each quadrant)
Back wall with fast track for lawn tool storage. Skid loader and tractor.
TV with soundbar and directv.
General view with my back against the green toolbox
Let me know what you guys think! I'm going to build and install some cabinets above the toolboxes this year. Also hope to have a pro come in and prep and epoxy the entire floor.
Sent from my iPad using Tapatalk
Barn is 42'x38'x14'-6" ceilings. I've got 8" thick concrete with 2 tons of rebar in it (overkill)
(1) 12'x12' overhead door
(1) 9'x8' overhead door
Bathroom and sink with hot water
Finished walls. 6" fiberglass insulation in the walls, plus 1-1/2" foam under the exterior tin. 14" blown in insulation in the ceiling.
Let's see how good I can illustrate this.
10k dammar Hoist with toolboxes. Right behind this pic is the 9x8 door.
This pic is right inside the service door. Heavy duty work bench ,fridge and torches.
Another pic just past the fridge. Torches, battery charger etc. I love the Rubbermaid fastrack!
Bathroom in the corner
Sink to the left of the bathroom.
Toolboxes
Cabinet and file cabinets. Oil, paint and filters and such.
Mustang, boat motor.... Tire changer in the back corner.
Loft for misc storage. My 60 gallon air compressor is in the rear corner and piped in throughout the shop.
Switch for the air compressor on/off is conveniently located right by my toolbox. That was actually a pain to install it so far from the compressor. 4 hose reels throughout the shop (in each quadrant)
Back wall with fast track for lawn tool storage. Skid loader and tractor.
TV with soundbar and directv.
General view with my back against the green toolbox
Let me know what you guys think! I'm going to build and install some cabinets above the toolboxes this year. Also hope to have a pro come in and prep and epoxy the entire floor.
Sent from my iPad using Tapatalk