Greatwhitewing
Well-known member
- Joined
- Nov 20, 2011
- Messages
- 531
Bought a few of their tools and very satisfied, good CS so far too. K5 pocket hole jig, 2 mobile work centers, saw guides and clamps.
Everything is top notch, well thought out design and proved to be extremely useful with a recent project.
I used two work centers with a 3/4 plywood sheet as a temporary work bench. Then cut plywood shorter to the size of the items I was making making use of clamps in each bench. Very strong and stable platform to work with.
I made over 300 pocket holes. Makes very tight joints easy and fast. I found in pine setting the stop collar for a slightly shorter counterbore worked a little better for me in not letting the screw poke through occasionally.
The saw guides are suitable alternatives to a full sized table saw. I only have a portable Bosch which is nice for narrow rips but cross cuts can only be done on quite small parts. Kreg rip guide is very handy. Accu-cut guide works pretty well too after finding a small error in setup on my part.
I am looking at some point to get their router table and lift which look to be top notch and reasonably priced.
Everything is top notch, well thought out design and proved to be extremely useful with a recent project.
I used two work centers with a 3/4 plywood sheet as a temporary work bench. Then cut plywood shorter to the size of the items I was making making use of clamps in each bench. Very strong and stable platform to work with.
I made over 300 pocket holes. Makes very tight joints easy and fast. I found in pine setting the stop collar for a slightly shorter counterbore worked a little better for me in not letting the screw poke through occasionally.
The saw guides are suitable alternatives to a full sized table saw. I only have a portable Bosch which is nice for narrow rips but cross cuts can only be done on quite small parts. Kreg rip guide is very handy. Accu-cut guide works pretty well too after finding a small error in setup on my part.
I am looking at some point to get their router table and lift which look to be top notch and reasonably priced.