Show me your stripes

[JCQuick]

I'm doing the fine coat on my build inside I'm doing a 2 tone and a stripe or 3 to make the split
I need ideas other than the ones in my head so just let me see them

 

[Dominico]

OSB finished with Zinser brand primer, Olympic silver gray walls with blue & white striping. Excuse the electrical cord on the clock as I need to run it in a channel and paint it. Also still need to epoxy the entire garage floor again due to the addition. A couple of those when I get around-to-it projects. Think I'll do something a little different on the floor? Maybe some black/white flecks vs solid color or possibly something to complement my Camaro?

 

[LS6 Tommy]

Sorry, just did the laundry...

Tommy

 

[Kevin54]

Dominico......why is the concrete floor under the Camaro a raw color and the rest is painted? BTW.....super looking Camaro to say the least

 

[Fyrme]

This is from my old garage. It's the only pic I have.
Solid Oak Flooring Bench Top by Fyrme, on Flickr

 

[kjdhawkhill]

This is from my old garage. It's the only pic I have.
Solid Oak Flooring Bench Top by Fyrme, on Flickr

Great looking work surface. I think I've just found a new plan. Now if I can only come up with the time to make it happen.


Sent from my iPhone using Tapatalk

 

[Dominico]

Dominico......why is the concrete floor under the Camaro a raw color and the rest is painted? BTW.....super looking Camaro to say the least

I added 8' onto the original garage and need to refinish the floor. I'll be posting in the flooring section this summer when its completed. BTW thank you for the compliments to my car!

 

[fnieto]

3/4" BC plywood tape and textured.

 

[buening]

Only pic I have currently from a few months ago (blue stripe matches my Grabber Blue Mach1):

 

[bluestripe67]

My stripe is directly related to the stripe on my '67 Vette. I see one pic is sideways...I don't know how or why this happens. Sorry!

 

[Rogue1987]

Subscribing as I want to paint stripes in my new garage as soon as I get it!

 

[340wedge]

Only pic I have currently from a few months ago (blue stripe matches my Grabber Blue Mach1):

My favorite car and color! My grandfather bought a grabber blue 70 Mach 1 off the showroom floor in NY. Love too see a pic!

 

[ddawg16]

I didn't do strips

 

[ABADWILLYS]

Just a thin red stripe for me, that seperates my OSB and the metal paneling in this shop, my other shop has the same color combo but that building is block construction and the stripe is about a foot wide

 

[buening]

My favorite car and color! My grandfather bought a grabber blue 70 Mach 1 off the showroom floor in NY. Love too see a pic!

Here are a couple older pictures when I installed new rims and the 315 rear tires. The first picture is a horrible angle.

 

[340wedge]

Looks awesome! White stripe is rare too! good luck with it.

 

[icenfire01]

This was just after i pulled the tape off, dont have a current pic but you get the idea.

 

[Dave88LX]

 

[JCQuick]

Sorry, just did the laundry...

Tommy

all ways has to be one

 

[nine4gmc]

Check out Dons Craftsman Woodworking Garage thread if he doesn't post here, his is awesome! Lots of great looking garages here too!

 

[JCQuick]

Oh thank you so much for that one its just about my colors

 

[Rossco]

I got a 4' stripe around the shop.

 

[JCQuick]

Thanks guys theres some real nice examples here giving me some good ideas

 

[Evilunclegrimace]

My stripe is directly related to the stripe on my '67 Vette. I see one pic is sideways...I don't know how or why this happens. Sorry!

This is the best car storage solution that I have seen yet, a zero gravity wall to hang your car on. Nice!

 

[ezriderga]

Here's half of my 2 car but you get the idea. Behind the double doors is my workshop and where I park my Harley when I have one. Have not replaced the one I sold a couple years ago though. Painted the garage/stripes about 3 years ago so it's holding up well. Next project is a coating on the floor.

 

[cbennett]

 

[Movover]

I was thinking this was more like this ?

 

[JCQuick]

I was thinking this was more like this ?

That looks like the work of a one wheel wonder but I prefer my 2 equal and straight