Show off your Cantilever

[jeffp1979]

Evening guys,
I just ordered a 22" cantilever Homak from my local Napa, got a fair deal I think I should be picking it up by Wednesday. I looked through a bunch of threads and trying to get ideas for organization, the box will stay in my truck toolbox and need to be switched from my company truck to my personal truck on weekends.
I need to keep standard wrenches to probably 1-1/4 metric to 32 3/8 and 1/2 drive standard and metric short and long pliers channel locks and vise grips as well as screwdrivers punches and chisels.
I'm not worried about weight to much just being able to find things quickly and know when something's missing.

Pics are always welcome, as well as lists

 

[SawtoothJL]

I carry a similar set of tools to you for work...Full 1/4,1/2, and 3/8 drive in metric and standard, gearwrenches in each, combo wrenches up to 1 1/4 and 35 mm, plus screwdrivers pliers and such; right now i have two bags of tools because its just awkward to stuff it all in one. Ive had my eye on that exact box for a couple months now, let us know how it works out when you get it!

 

[gdpolk]

I have the same box. Last time it hit the scale it came in at 84lbs. I love it. I can just open it up and it sprawls the tools out for a quick, easy grab and go fix.

 

[sk farmer]

sight inventory?

should have ordered a montezuma.......

 

[T45]

sight inventory?

should have ordered a montezuma.......

OP has too much tools to effectively work out of a canti box IMHO.

 

[jeffp1979]

I've had montezumas before, loved them, they work great, however now I need something to go in my crossover bed toolbox, not sit in the back of an open bed, had all these tools in a 3 drawer rally type box from Home Depot, drawers wouldn't stay closed when driving through pastures. And I would find everything scattered in the bottom of my u w s box.

 

[dr_clyde]

Here's mine. These are old photos, the list has changed somewhat.

Box is a Snap-On UT22K

Knipex mini bolt cutters
Pliers wrench
Channellock slip joint pliers
Channellock 420 tongue and groove pliers
Channellock 430 tongue and groove pliers
Channellock 360 mig pliers
Mac needle nose pliers
Klein diagonals
2x 10wr Peterson vise grips

Williams 1/4"-3/4" deep 3/8" drive impact sockets
Williams 10-19 MM deep 3/8" drive impact sockets
1/4"-7/8" shallow cman 3/8" drive chrome sockets

3/16" -9/6" cman 1/4" drive deep 6pt chrome sockets
T15, 20, 25 cman 1/4" drive torx sockets
3/16"- 9/16" cman 12 pt shallow chrome sockets

SO 1/8"-3/8" hex sockets, ******* homemade 1/2" hex socket
T30, 40, 45 50 cman sockets

SO F731 flex head ratchet
SO F936 standard ratchet
SO T72 ratchet

Unbranded 6" 3/8" extension
Cman 3" extension 3/8"
BP 1,3,4 inch extensions 1/4"
BP universal
BP spinner handle
Eklind standard and metric Allen folders

SO yellow instinct screwdriver set including minis
SO red short pick set
Mac 1/2"-3/8" adapter

9-17 MM metric cman RP wrenches
Vaco 8" adjustable
Cman 10" adjustable
Cman 3/8"-3/4 " RP wrenches
SK 7/8 superchrome wrench
SO 1-1/8 wrench
WF USA crescent 15" adjustable.

Stanley torpedo level
Ridgid 18 aluminum pipe wrench
2x jbauer 123 blocks
Mac compothane deadblow/brass hammer
Mac 16 oz ball peen
8" Nicholson half round smooth file with handle


Empire 7" speed square aluminum
Food grade anti-seize
Cman striking scraper
SO striking prybar set minus longest one black handle
Old as balls hacksaw
Astro pneumatic die grinders straight and 90 deg
various attachments for the die grinders

Stanley 25' and 12' tapes
M.F. Co Combination square
Dasco 5/8 cold chisel
Dasco center punch
Tekton 1/8 starter punch
Blue point 1-1/4 mirror

Cheap led flashlight
Stanley utility knife
Argon to air fitting purge adapter
Techsouth 1-1/2 cut block

Wire and buna-n gasket for 1-1/2 triclamp
General carbide scriber
Spare grinder nut
Anchor stainless wire brushes
Die grinder wrenches
Assorted zip ties
Kershaw taskmaster scissors

 

[PureLeaf]

Cantilever Toolbox Thread

http://www.garagejournal.com/forum/showthread.php?t=109438

 

[jeffp1979]

Hey guys just picked up my box, really impressed with the build quality. I'll post pics when I figure how I want to load it