Show off your.... Carlyle Tools!!!

[Fedwrench]

72 dollars? Really?
https://www.napaonline.com/p/CHQR14S100#

NAPA's list prices on tools have always been high. Watch for a sale in their real deals flyer and grab something on sale. I picked up that ratchet last month for lees than $35 on sale.

Yes, the Gearwrench/Crescent versions can be had for much cheaper especially from a place like Cripe Distributing on Ebay. However, the 100 tooth action and quick release offered on the Carlyle version may be worth the difference in price to you.

 

[stage20]

72 dollars? Really?
https://www.napaonline.com/p/CHQR14S100#

pretty sure this could be the same head as the matco and mac versions.
the matco is listed not much higher if you like a chrome handle
http://www.matcotools.com/catalog/product/AR6ST/1-4-100-TOOTH-SWL-RATCH/

too expensive for me. ive got a couple huskys i picked up at the flea market for a dollar, work great. lol

 

[Macca]

pretty sure this could be the same head as the matco and mac versions.
the matco is listed not much higher if you like a chrome handle
http://www.matcotools.com/catalog/product/AR6ST/1-4-100-TOOTH-SWL-RATCH/

too expensive for me. ive got a couple huskys i picked up at the flea market for a dollar, work great. lol

Agreed, look very similar to the MAC 100 tooth variant

 

[Schurkey]

72 dollars? Really?
https://www.napaonline.com/p/CHQR14S100#

When I click on that link, the price is $46.62.

I don't know why you think the price is $72.

 

[71firebird400]

When I click on that link, the price is $46.62.

I don't know why you think the price is $72.

Shows up as $71.49 for my local store, and is listed as "Not In Stock". If I change "My Store" to a different location where the tool is in stock then the price drops to $46.62.

 

[Schurkey]

Shows up as $71.49 for my local store, and is listed as "Not In Stock". If I change "My Store" to a different location where the tool is in stock then the price drops to $46.62.

"I" would have a short 'n' direct conversation with the manager of that local store. While I could be wrong, I think your experience is telling you a lot about the management of that store--specifically, they're crooks and you should never buy from them if they want ~50% more than the "normal" price for everything.

Which is tough for me to say, as NAPA is my first stop for any car parts I need "today".

 

[jo4gj]

Shows up as $71.49 for my local store, and is listed as "Not In Stock". If I change "My Store" to a different location where the tool is in stock then the price drops to $46.62.

Well just so you know it's a real deals for 49.991/4 all swivel heads are on sale
For the next 4 months

The 72$ was it the 3/8

 

[Schurkey]

Yup, NAPA changed the price again. Now shows as $49.99.

Nice "sale" price when they're charging MORE than they were just a few hours ago.

I guess that's the First Of The Year price increase.

 

[stage20]

Yup, NAPA changed the price again. Now shows as $49.99.

Nice "sale" price when they're charging MORE than they were just a few hours ago.

I guess that's the First Of The Year price increase.

napa website must be turning into sears. LOL

 

[avmaine]

Hey, i threatened that this thread would come.

Here it is!

I really hate to be rude and ask, but I've been holding back waitihg to buy a new wrench set. What is the ballpark cost on that full wrench set?

 

[bsaint]

Yea I just realized that the priced dropped today. Interesting...

 

[John in OH]

I really hate to be rude and ask, but I've been holding back waitihg to buy a new wrench set. What is the ballpark cost on that full wrench set?

At my store in SE Ohio, the price for the Carlyle Long Non-Slip Combination Metric wrench set, 6 mm - 24 mm, part number CHT CWL1219M, is $160.

 

[Tom.C]

New 24" adjustable, awesome wrench

 

[1foxracing]

A few weeks ago I picked up some new Carlyle 1/4" drive stuff, been really happy with all of it so far.

 

[Bluejoe]

Hey those are nice. I plan on purchasing 1/4 , 3/8 sockets , extensions, swivels along with ratchets. I'm working at another small engine equipment shop and need to bring my tools in then home after the day. It's sometimes tiresome to do it but I'm sick of having my tools disappear. The Carlyle tools are cheaper then loosing my Snapon. The thing is I really hate to loose any tools expensive or cheap.

 

[ryan20021982]

Got these when they had them on sale

View media item 63825

 

[Bluejoe]

I was looking into the Carlyle tool line along with others and I see they don't knurl any part of their extensions. Most brands offer it but Carlyle. The finishing on the tool is excellent but it be nice to have knurling on the extensions so your grip don't slip. Maybe they do but have not seen any in the NAPA store.

 

[jo4gj]

I really hate to be rude and ask, but I've been holding back waitihg to buy a new wrench set. What is the ballpark cost on that full wrench set?

Hey check the real deals I think in the top right hand corner is like a buy one get one for the wrench sets so u can get metric and get the free standard set.

 

[rockinacummins]

Just got these. 50% off in the napa real deals this quarter.

 

[woody6904]

R38F - 60 tooth 3/8 ratchet

Sent from my SM-G900P using Tapatalk

 

[Brownsfan]

Is it me or does the Carlyle 60t ratchet above look just like the Autozone Duralast 36t ratchets. Obviously with more teeth. But man do they look very similar.

 

[stage20]

Is it me or does the Carlyle 60t ratchet above look just like the Autozone Duralast 36t ratchets. Obviously with more teeth. But man do they look very similar.

kinda mix between gearwrench and mac to me.....

 

[woody6904]

Sent from my SM-G900P using Tapatalk

 

[mudflap]

We expanded our stock of Carlyle !
Lookin and sellin good !

WOW.....We can order anything in the Carlyle line..and get it same day..or next day..but i wish our local store was stocked like this.....

 

[B_Lafayet]

That looks great! I will take 1 of everything.

 

[jo4gj]

Wow wish my local store was stocked like that. Also idk why but my local store claimes that the Carlyle stuff is made by the people that make snap on and that the gear wrench shits as good as the Carlyle that's why they don't stock Carlyle ratcheting wrenches. I laughed my *** and said find me a Carlyle tool that says made In USA lol he tried for a minute as walked away.

 

[snowpro90]

I bought the screwdriver set from Napa. They feel great!

 

[dodge610]

Just ordered the 4pc. Cabinet screwdriver set hoping they are decent drivers these will be my first Carlysle tools. On sale at the Napa store for $24 and change.


Sent from my iPhone using Tapatalk

 

[dodge610]

On sale at Napa 4pc. Cabinet screwdriver set my first Carlysle purchase.


Sent from my iPhone using Tapatalk

 

[uncwstudent]

I've bought a couple Carlyle ratchets and I have to say that I'm really, really impressed with NAPA's house brand. I know that they're Taiwanese and all but they are great quality!

 

[dodge610]

Got these to add to my Carlysle platform thanks to the GJ member I got them from Cody59.


Sent from my iPhone using Tapatalk

 

[Wamsutta]

No lathe cut grooves on the handle; interesting. Wish Snap-on would do that but they're not going to give up on their signature trademark.

 

[rockinacummins]

My latest addition. These things are sweet. $21.99 on sale right now.

 

[APS2000]

R14lfqr

 

[APS2000]

Compared to the HF flex

 

[APS2000]

Head shot

 

[Flinter987]

Sorry the pics aren't the greatest

 

[dodge610]

Sorry the pics aren't the greatest

Darn I need a Carlysle hat them are nice.

 

[Flinter987]

Darn I need a Carlysle hat them are nice.

Yeah, I asked my local store and they didn't have one so I had to order it off Ebay.

 

[nbpt100]

My Local Napa does not stock much in Carlyle....Those screw drivers are nice....I like how they have the hex bolster for more leverage. They look like Irwin.....if I did not see the name i would have thought that. I am just say'in.