Show us your pegboard!

[Fender1325]

Thanks! Shame it's a cheapy. Looked nice

 

[cderalow]

Still setting mine up. It holds most of the cycling specific tools I use the most.


Sent from my iPhone using Tapatalk

 

[IdahoMan]

Forget it, it only allows one photo per post....at least its right side up now.

Lol.

I thought the tool-chest in your pic was just in storage or something.

 

[NewLogik]

Always a work in progress...

 

[IdahoMan]

Always a work in progress...

Tell us a little about your gaming setup.

 

[gtabasso]

Check out this pegboard Christmas tree!!!!
https://makezine.com/2015/12/21/diy-christmas-trees/

 

[slodat]

This is how I hang pegboard.. Rip strips of 3/4" plywood a touch narrower than 3/4" wide.


Evenly space the strips across the sheet to be mounted. Drill holes through the pegboard and backing strip and start a screw into the hole. The strips go between rows of holes.


Then hang and drive the screws the rest of the way.


This method leaves all holes open for pegs and spaces off the wall plenty far enough for hooks. It works great!

 

[Negen]

Mine is simple only used for garden tools

Sent from my G8141 using The Garage Journal mobile app

 

[BolognaBlake]

Always a work in progress...

Who is streaming Mario 3 in the year of our Lord 2018

 

[PAN FRIED]

This is the only pic i have but the top 4' of my garage has peg board all the way around it. I can pretty much hang anything anywhere anytime. Really handy!

 

[MountaineerMiner]

I had a peg board(s) since 2008, moved them 2 states, 2 apartments, and one house. Went to a full cleat system starting last Christmas break. The metal shop has been a complete disaster since, but these pics are about 2 months old....it’s much better now, swear!

The Ellis is now gone and lots more has made its way to the wall. Need to move the large vertical out and get the remainder of my gear running.




Sent from my iPad using Tapatalk

 

[AndyL]

Figured I'd show off a bit.

Pegboards been my nightmare for the past few months, been side hustling a bit of 3d printing, ended up that the Nerf folks kept me busy. Then those nerfs started accumulating. Verifying fit, builds for customers etc.

Trying to bend stuff up, adjust metal pegs to hang things square and level... Wasn't working.

I don't know what took me so long - suddenly realized I have 3d printers, and cad skills. That's my new promo wall, no metal pegs on there.

The breach mount mag holder - that makes me feel like a genius! Turned out slick as they get. All of it's modular, swap the pegs out from US imperial to mm to Ikea oddity in about 5min of cad tinkering.

 

[Solpainter]

Pictures of my one car garage workshop and my two car pegboard for garden and large junk.