Show Your Heritage Logo Love

[Madc]

Thank you for the picture of the Carpenters wall cabinet- that one is much better than the one I have, Thank you! I recall seeing a list of tools at some point but cant seem to find that. Thank you everyone.

MADC

 

[Madc]

Kept digging around and found these two images. Not the exact vintage wall cabinet I have, but a pretty good idea of what carpentry tools were thought to go in it.

MADC

 

[outofbounds]

I have no skin in this listing, just throwing it out there for collectors of the Heritage logo. Seems like a peach to me.

https://detroit.craigslist.org/mcb/tls/d/utica-vintage-craftsman-100-drill-press/7031959342.html

 

[GalaxyRat]

Just finished up this little project. Kroil ate my paint under the hinge while I was putting in the wire. It's an easy fix, so no big deal

Sent from my SM-G973U using The Garage Journal mobile app

 

[jeffmoss26]

love it!!

 

[Smokeshow69]

Just finished up this little project. Kroil ate my paint under the hinge while I was putting in the wire. It's an easy fix, so no big deal

Sent from my SM-G973U using The Garage Journal mobile app

Looks good! Cut some cork sheets for drawer liners!


Sent from my iPhone using The Garage Journal mobile app

 

[GalaxyRat]

Looks good! Cut some cork sheets for drawer liners!


Sent from my iPhone using The Garage Journal mobile app

Great idea! I was gonna use boat carpet, but I like the cork idea more.

Sent from my SM-G973U using The Garage Journal mobile app

 

[txlonghorn1989]

Not sure if this square is Heritage? It was a glob of orange crust, but a soak in evaporust allowed me to get it apart.
A socket box joined the family. And a vise...maybe I already posted it.

LS: I REALLY like that leather-handled socket box (?)!!! Is there a catalog ad showing what that box would have held?

 

[outofbounds]

A couple of Heritage items I have found but never show here:


And inside the little box

A nice 3/8's drive spinner set. But I have never quite figured out what the leather pouch is for, exactly. Punches? Chisles? I don't know.

Love the pouch, I thought I was cool with my "pleather" one (that a clean chisel edge cut right through......

 

[outofbounds]

Currently offered on Facebook in Royal Oak, MI. NOT my listing, and nothing I can use, but laying it out there in case anyone else is interested.

 

[outofbounds]

Also on FB Marketplace in my area (Farmington Hills, MI) for $35

I just don't have the room

 

[Smokeshow69]

Great idea! I was gonna use boat carpet, but I like the cork idea more.

Sent from my SM-G973U using The Garage Journal mobile app

Home Depot sells rolls that are for drawer liners. I leave the adhesive backing on the roll as the material is fairly rigid. It is also easy to cut


Sent from my iPhone using The Garage Journal mobile app

 

[Semi-hole mechanic]

What do you figure that leather handled box dated from Don?

Looks a lot like my Dad's 1/2 drive set. Ive found it in a 1947 catalog. Dad got his for HS graduation in '48. I still have the box, breaker bar, speeder, and a couple of the sockets. The box is pretty beat up as it has seen a lot of hard use over the years on the farm, the handle is held on with a bit of baling wire, and has been as long as I can remember.

 

[Semi-hole mechanic]

Forgot to mention that I dated Dad's to '47 because the '48 catalog showed a hip roof box and didnt have the speeper in the lid.

 

[txlonghorn1989]

Forgot to mention that I dated Dad's to '47 because the '48 catalog showed a hip roof box and didnt have the speeper in the lid.

Thanks Shm! I'll check TA to see if they have a '47 catalog with it in there.

 

[txlonghorn1989]

Home Depot sells rolls that are for drawer liners. I leave the adhesive backing on the roll as the material is fairly rigid. It is also easy to cut


Sent from my iPhone using The Garage Journal mobile app

The toolbox liner at HD is Husky brand. It's what I use on my toolboxes. I really like it.

 

[Smokeshow69]

The toolbox liner at HD is Husky brand. It's what I use on my toolboxes. I really like it.

I was referring to the rolls of cork that Home Depot sells in the shelf liner section. I haven’t used the husky stuff yet but sounds like you like it!


Sent from my iPhone using The Garage Journal mobile app

 

[JoCoSawdust]

I use the cork rolls from Lowes/Home Depot as well.

 

[Zrxrunner]

So, initial thought was that I had to pay up for this set, but then realized I got a nearly complete vintage 3/4" drive set with box for $45. Lid and frame of box are pretty solid, but the bottom is seriously roached out! Seems to only be missing 1 3/4 and 1 3/16, but not sure what a complete set would have included in this box. Had pretty good luck with online only auctions when weather gets cold. Nice SK made set for the collection!

 

[r_olson_06]

Good to see some good finds close to home. That is a nice circle k set.

Looking for the following Plomb Pebbles Wrench 3061

 

[JoCoSawdust]

Nice find on the Circle K set Zrx. I looked through several years of catalogs and it looks like that boxed set always came with 7 sockets and "room to grow" in the box. This is a 49 clip.

 

[Zrxrunner]

Nice, I'll have to keep an eye out for the t handle and extensions for sure. I'll post more pics when I get time to polish the sockets and maybe make up a new bottom for the box.

 

[Oldtuleguy]

Mine has 7 circle k sockets, one sk and one craftsman v.

 

[LesserSon]

LS: I REALLY like that leather-handled socket box (?)!!! Is there a catalog ad showing what that box would have held?

Yes. Looks like I found it on p2 of the 1948 catalog.
16pc set: 18in speeder, 15in sliding tee, 5 & 10in extensions, 10 12pt sockets 7/16 to 1in.
I think after ‘48 the same set was packaged in a low hip-lid box.

 

[Zrxrunner]

I guess I got a better deal than I thought! All 11 of the circle kid's were there, and an actual SK labeled one and a few craftsman 1/2" sockets. No drive tools though.

 

[txlonghorn1989]

Yes. Looks like I found it on p2 of the 1948 catalog.
16pc set: 18in speeder, 15in sliding tee, 5 & 10in extensions, 10 12pt sockets 7/16 to 1in.
I think after ‘48 the same set was packaged in a low hip-lid box.

I wonder if this could be the low hip-lid box you're referring to? Disregard the tools in there...it's a hodge podge of vintage US with few Craftsman. No badge or decal that I've seen inside or outside the box.

 

[JoCoSawdust]

LS is correct that in 49 the 16pc 1/2d set went to a low hip box. 49 was the first year that set was filled with MDF tools instead of NB. I'd guess the box change was because the other box wasn't tall enough to accommodate that huge handle on the MDF speeder.

Tex, your low hip box looks to be the right size and shape but that handle and paint throws me. Looks kinda sorta mid to late 50s Craftsman but that handle would be out of place in that era. It also looks like it's either been replaced with those flat nuts on the inside or possibly the factory rivets gave out and somebody just reattached it with those. The catalog diagram shows a different partitioning that doesn't extend the full length of the box. While I think the catalog diagrams are generally pretty damned accurate, there's always room for error looking at those things. My guess? I don't think that box is Craftsman. Still a cool box, that handle is in pretty good shape.

 

[LesserSon]

I wonder if this could be the low hip-lid box you're referring to? Disregard the tools in there...it's a hodge podge of vintage US with few Craftsman. No badge or decal that I've seen inside or outside the box.

I think your box is older than 1949, whatever the source.
The ‘49 catalog shows a low hip box with a METAL handle.

 

[GalaxyRat]

Got my cork liner installed, finally.

And a little dog tax, too.

Sent from my SM-G973U using The Garage Journal mobile app

 

[Smokeshow69]

Got my cork liner installed, finally.

And a little dog tax, too.

Sent from my SM-G973U using The Garage Journal mobile app

The cork really dresses up a vintage box!


Sent from my iPhone using The Garage Journal mobile app

 

[d42jeep]

The sliding Tee that was missing from my 1/4” drive set arrived today and went right into the box.
-Don

 

[LesserSon]

Liberated this ca1952 sliding tray tool box from a hardly-ever-open antiques place today for $35. The tray slides are a bit sticky. Otherwise I like it.

 

[JoCoSawdust]

Nice find LS! Great original shape!

 

[Oldtuleguy]

Nice pick up LS. I like the sliding tray set up

 

[Smokeshow69]

Liberated this box from a hardly-ever-open antiques place today for $35. The tray slides are a bit sticky. Otherwise I like it.

You royally ****! Those are hard to find with intact trays. Just lube the slides and be gentle and you will be ok.


Sent from my iPhone using The Garage Journal mobile app

 

[chstrumpetdude]

Very cool mailbox!

 

[outofbounds]

Noted for any woodworkers out there.....as seen on FB Marketplace in Brighton, MI. I have no affiliation with the seller, just making note of it here in case anyone in interested.

 

[outofbounds]

Pretty attractive deal IMHO for $50 take all...... located in Cleveland OH area on FB Marketplace. I have no affiliation to the seller. Just directing this in case someone has been searching high and low for a top chest like this. (I've been searching for one more like Kate Upton, personally )

 

[d42jeep]

I was going through the oilers in my garage this morning and noticed this sitting in a box with some other oilers.
-Don

 

[JoCoSawdust]

Nice! That decal sure weathered the years well.