Show your new tool arrivals

[IBJanky]

Got these cool ratchets from HF:

They are even extendable to six different length positions, depending on how much torque you need:

Also picked these up from Sears:

Less than $40 for everything I mentioned

myke

 

[wave180]

From Sears last Tuesday

I found some CM pro pliers on clearance

Compared to my Ideal

 

[knocker]

I've been eye'in these for a long time, snappy had them on sale this week so I pulled the trigger. Snap-On 1/4" metric 5-15mm mid-length sockets.

 

[Modern Jess]

I've had a few deliveries this week.

Wiha Drive-Loc Screwdriver Set
SK Tools metric combo wrenches
SK Tools 1/4" metric socket set and ratchet
SK Tools 3/8" drive flex-head ratchet
SK Tools splined combo ratchet set
Wera Zyklop 1/4" SAE socket set (very, very awesome)
Wera Kraftform stainless steel screwdrivers
Wera 1/4" hex driver bit set and ratchet

The SK stuff will go in my new Hazet Assistent. The Wiha screwdrivers are for one of my tool rolls (for taking on the road). The Wera Zyklop set was a bit of a mistake -- I meant to order metric, and flubbed it somehow. It's too nice to send back, though, so I'm keeping it.

 

[zoomzoomjeff]

where did you find those at?
i google the number and only came up with mernards; which arent local to me

Yep. That's where I found them on clearance for 20 bucks!

 

[Monte]

I've had a few deliveries this week.

veeeeeery nice tools !!!

 

[archirelic]

These just arrived today. I must admit that I'm very, very impressed with these drivers.

The only "negative" associated with these might be in regards to their handle size...just a tad bit small on the Phillips 2 and 6.5mm Slotted drivers.

With all that being said, I will be looking at expanding into the rest of the Felo Ergonic line-up.

 

[pacsguy]

These just arrived today. I must admit that I'm very, very impressed with these drivers.

The only "negative" associated with these might be in regards to their handle size...just a tad bit small on the Phillips 2 and 6.5mm Slotted drivers.

With all that being said, I will be looking at expanding into the rest of the Felo Ergonic line-up.

Very nice. I like the felo stuff. Now you'll need to get these:

<a href="http://www.flickr.com/photos/63611986@N08/5782576832/" title="DSC02473 by pacsguy, on Flickr"><img src="http://farm3.static.flickr.com/2423/5782576832_3be158aafd_b.jpg" width="1024" height="768" alt="DSC02473"></a>

 

[archirelic]

Very nice. I like the felo stuff. Now you'll need to get these:

<a href="http://www.flickr.com/photos/63611986@N08/5782576832/" title="DSC02473 by pacsguy, on Flickr"><img src="http://farm3.static.flickr.com/2423/5782576832_3be158aafd_b.jpg" width="1024" height="768" alt="DSC02473"></a>

Item number and place of purchase...?

 

[canuckian]

Fresh off the truck...SHR80. Snappy guy even had the orange/black handle on there for me when I picked it up! Marred the selector switch when he put it in the vise but i won't cry too much about it as he didn't charge me for the handle. The pliers are 908ACP's. Nice little set.

 

[brianpgriset]

I got a few Channellocks, my old Craftsman 5 piece set was getting worn out, and I've been meaning to build a good Channellock set.





Just need a few more pairs to round out what I need.

 

[north]

That's an ok start I would say. I have the twin of the one in the lower left corner.

 

[98TJ]

Picked up the HF 1/2" clicker yesterday.

Also picked up a 3-piece set of Stanly FatMax wood chisels. Made in England version - not Chinese.

 

[zer0cell]

Pretty Sweet channellock collection...

 

[lowbucktruck]

brianpgriset, digging that new set of ChannelLocks. Nice!

I finally broke down and bought a new Bayco cord reel from Home Depot (it was even cheaper than a similar cord reel at HF!). Had a Sears gift card from my last birthday that I was saving, decided to use it on a 21-piece Craftsman drive tool accessory set (# 42283).

 

[RhodesSpeedShop]

Jeff,

Got these 2 today, and have about 5 more on the way.

gj67Stang is going down!!!!!!!!!!!!!!!!! LOL

Please tell me you got a huge discount for buying in bulk

 

[RhodesSpeedShop]

Wright D978 arrived today. I put adhesive-lined heatshrink on the pegs and mounted it to my pegboard (mounting is hidden, the hooks at the bottom are just to keep the bottom snug against the pegboard).

It's next to my D980 set.

Very nice....little envious

 

[RhodesSpeedShop]

Got my SHR80A and Lock Out kit in thursday....spent the weekend popping open buddies trucks, taking their tool boxes and making them come buy me a beer in exchange for their stuff

 

[RhodesSpeedShop]

...also added my "promo" hard handles to one of my green drawers.

 

[archirelic]

Yeah, yeah, yeah...I know they're nothing "special" in terms of being a big fancy name...but at the price I got them at and considering the overall comprehensiveness of the set, I definitely can't complain! And, to top it all off...I have my wife to thank for purchasing this for me as an early Christmas present!

43 piece raised panel Craftsman wrench set. All for under 160 shipped to my front door!

 

[canuckian]

Few small items over the last few days. Earnhardt set (put the car in my little guys collection) 3/4-1 line wrench and fh936 ratchet came from EBay -I slipped a new handle on the ratchet as it was shot. Klein scissors and knife were bought locally.

 

[jeffmoss26]

Drooling over the blue snap on stuff! Klein snips are the best!

 

[Abington]

Just picked up this set of Plomb sockets, I think I might be a vintage tool junkie someday, but this is my first vintage tool acquisition.
Set isn't complete, but I love the box and it's patina. There is a late 40's early 50's Snap-On 1/4" ratchet with it, not the original Plomb. Sockets have an interesting design, the fit onto what looks like a standard allen wrench, but the allen wrench has a locking ball on each end. The 1/4" breaker bar is also Snap-On, but it has the cool handle that turns it into the "T"

 

[canuckian]

Drooling over the blue snap on stuff! Klein snips are the best!

Yeah, Im diggin the blue as well....just wish it didn't have DE's signature plastered all over it! Lol I suppose if it didn't it would be 2x the price!

And yes, I love the Klein wiring stuff. That little knife is the shizznit! Lol

 

[wchamberlain]

Drooling over the blue snap on stuff! Klein snips are the best!

I'm drooling over the hard handle ratcheting screwdrivers!!!!!!!!!!!

 

[blue dog]

Brown truck dropped off my Nupla 3 lb dead blow { very nice } and a 4 lb single jack. Cant wait to hit something with them.

 

[IBJanky]

New screwdrivers from Sears

Then I got these for $6+tax at Lowes

myke

 

[jeffmoss26]

Be careful with that Klein knife. It is VERY sharp, I have a scar to prove it lol

 

[bobemmerich]

Got these in today...Allen screwdrivers, precision screwdrivers, 24 mm wrench 1/2 dr ext and a 3/4x7/8 line wrench from Cripe. I know the drivers aren't US made, but they will be used as supplements. The ext. and wrenches are USA

 

[dodge610]

New tool arrivals this week yesterday and today only one pic loaded try again

 

[dodge610]

Dont know what is wrong but here is the 2nd. pic of the 4 were tryin ti upload.

 

[dodge610]

Hey finally

the last two pics hope the rest of you guys are not havin trouble uploading pics. Anyway the cresent wrench was free. the sandpaper portfolio is what sears has on sale for $8.99 comes with 50 sheets of sandpaper 10 each of 5 different grits.

 

[canuckian]

Just picked up this Klein ratcheting screwdriver today from a local store. I guess its their new design. It's made in Taiwan but it's a very nice tool nonetheless. It's almost like a cross between a normal ratcheting screwdriver and a 6 in one screwdriver as the shaft is removable. It came with 2 Robertson tips and a flat and philips tip. The shaft also serves as a nut driver. Worth checking out for sure IMHO.

 

[engineer2]

This should be retitled the tool **** thread.

 

[JMartel]

Trip to HF today since I'm in an area where there's one 5 min away (instead of an hour like the ones near me)

Heat gun

Nut/Bolt/Washer sorting tray

Nuts/Bolts organizers

Plastidip. Funny how Lowes and HD near me don't have it...

Professional Long Nose Pliers

And of course, a free flashlight.

 

[tpolley]

here's mine.

the other day i wanted some different screwdrivers for my copier service case. the old green handle ames screwdrivers didn't offer much grip. i wish pittsburgh professional offered a magnetic 5.5mm nut driver, i'll have to keep the ames. i also wanted a ratcheting screwdriver scrictly for my service case. i leave the snap-on at the shop so i don't leave it somewhere. i picked up an 8pc set from harbor freight. put the philips and the ratcheting screwdriver in the case and put the flat heads in the tool box at home.

i also picked up a pair of pittsburgh professional chinese needle nose pliers as a trial. if they're decent i might buy the whole line for my tool box at home. if they turn out to be junk, it'll cost more, i'll stick to the american made pliers.

i also picked up some line wrenches, a fuel pressure gauge, a tap and die set which i plan to use for repairing threads, and some uni-bits

 

[IBJanky]

Some new additions:

myke

 

[ECP]

FAR25A ratchet is brand new. Got it for more than half off the truck price (ebay).
Hammers are used, but still very useable.
Oiler... I found it in my shop. Cleaned it up, and I'm going to use it for my air tool oil.
NOS black S-O handles I bought from a member here. One is going to be used on a dual 80 3/8" bent flex head, and not sure about the other.

 

[Machobuck]

good stuff, I want some snapon body hammers. I'm sick of useing other peoples

 

[afazz]

Nice haul ECP! Where did you buy the hammers?