Ohio Andy
Well-known member
Where did you buy your thread restore kit? It looks like the newer ones are no longer made in the ULang thread restorer kit
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Ohio Andy
Well-known member
I finally decided to purchase a Rethreading kit so I purchased the CTA Tools 8240 Universal 53-Piece Rethreading Set, RED (Made in the USA). My original intent was to purchase the Lang or Kastar 971 kit (they are all the same kit) but the manufacturer apparently moved production to China and I wanted a made in USA set. I would find kits where the picture showed made in USA but the product description stated made in China. I figured it would be hit or miss as to whether I ended up with older stock made in USA or unknown made in China....
So, I purchased the CTA set, which is marginally larger 53 piece rather than the 48 piece set, and it was about $20 more.
The parts stay pretty well in the case. I have not used it yet. Some of the Dies are very hard to read, but my eyes do not work that well and I did not have a magnifier while I was verifying that I had the correct pieces. The primary item it is missing is an M8x1.25, not that I ever had to deal with one of those. It does have M8x1.0 (die only) and M8x1.50 Tap and Die. Note that the taps are easy to read.
A piece of paper is included that shows exactly what everything is and its location in the box. Do not lose this.
So, I purchased the CTA set, which is marginally larger 53 piece rather than the 48 piece set, and it was about $20 more.
The parts stay pretty well in the case. I have not used it yet. Some of the Dies are very hard to read, but my eyes do not work that well and I did not have a magnifier while I was verifying that I had the correct pieces. The primary item it is missing is an M8x1.25, not that I ever had to deal with one of those. It does have M8x1.0 (die only) and M8x1.50 Tap and Die. Note that the taps are easy to read.
A piece of paper is included that shows exactly what everything is and its location in the box. Do not lose this.
I got this one (Lang 971) from Zoro.
ronkz650
Well-known member
I got the Lang 971 thread restorer kit from Zoro as well. As of one month ago, it was USA made, $111 with a 20% of coupon, $89.
isb cornbinder
Well-known member
02Xterra
Well-known member
My wife recently picked up an old Singer sewing machine to rehab, so naturally she'll need a tool kit for it!
Ilikeike
ALLIANCE MEMBER
I have the Quinn shop shears, and those things are legit.I did a side-by-side comparison... and didn't take pics... and the woman, she ran off with them. But when I was looking at these "Quinn" brand scissors in Harbor Freight, I was thinking, "Maybe she'll need to take a gander at the Milwaukees I have in the shop, which might be a little longer."
Nah. Very, very comparable in size and heft. The only difference is that it is that the plastic of the Quinn's handles go on for a little more in the rear, and it's unknown if they are full tang. I bought these Milwaukees after I dropped a cheap pair of (modern) office scissors in the shop and when they landed, handle-first, one plastic handle broke in a big way, meaning they weren't scissors anymore. Also, I suppose with full tang scissors you could crack the skull of a rival accountant.
The "Quinns" are, of course, much cheaper. Maybe a third the price of the Milwaukees.
Heiko
Active member
Today a set of Ko-ken Zeal 1/4" swivel Nut Grip sockets arrivedThey are so compact and well made
Interesting. I haven't seen the swivel version of those before. Now I want one, or a few...
Skyman
Well-known member
Damn, thi$ forum i$ dangerou$.I finally decided to purchase a Rethreading kit so I purchased the CTA Tools 8240 Universal 53-Piece Rethreading Set, RED (Made in the USA). My original intent was to purchase the Lang or Kastar 971 kit (they are all the same kit) but the manufacturer apparently moved production to China and I wanted a made in USA set. I would find kits where the picture showed made in USA but the product description stated made in China. I figured it would be hit or miss as to whether I ended up with older stock made in USA or unknown made in China....
So, I purchased the CTA set, which is marginally larger 53 piece rather than the 48 piece set, and it was about $20 more.
The parts stay pretty well in the case. I have not used it yet. Some of the Dies are very hard to read, but my eyes do not work that well and I did not have a magnifier while I was verifying that I had the correct pieces. The primary item it is missing is an M8x1.25, not that I ever had to deal with one of those. It does have M8x1.0 (die only) and M8x1.50 Tap and Die. Note that the taps are easy to read.
A piece of paper is included that shows exactly what everything is and its location in the box. Do not lose this.
Looking forward to its arrival. Thanks (I think
) for the link.Link? I looked at Koken USA and a bit on Amazon Japan and did not see them, look sweet, how big is the coin in the picture?Today a set of Ko-ken Zeal 1/4" swivel Nut Grip sockets arrived
Thanks!
PelicanPines
ALLIANCE MEMBER
Had to get a couple of those scrapers recently purchased by another GJ member here. Also placed an order for M18 battery holders and Ridgid battery holders too. I have a wooden cart I use for all my battery tools... I screw these on the sides for spare batteries.
I finally decided to purchase a Rethreading kit so I purchased the CTA Tools 8240 Universal 53-Piece Rethreading Set, RED (Made in the USA).
A piece of paper is included that shows exactly what everything is and its location in the box. Do not lose this.
Can you laminate that inventory sheet, and attach it to the inside of the case's lid (double-side tape or other adhesive)? If it's too big, you could reduce it on a copier first.
Mike
BlakeTheCarGuy
ALLIANCE MEMBER
Treated myself to some new tools today since I got a raise at work on Monday per my request. My coworker has this air hammer and it’s a beast. It goes on sale next month but dealer was like just go ahead and take it for that price and I’ll bring you the rest of the kit when it arrives September 1st. Sounds good to me because this air hammer is a beast and I hate having to borrow stuff so I wanted to treat myself to something new. I hardly ever buy anything off the Mac Truck mainly because he doesn’t show up but like every 2 weeks but to be fair he has a lot of health problems so I’ve forgiven him for his absence. He also warrantied my pawn shop 10mm socket that was cracked lol 
.
Then a Tekton 3/8 breaker bar. Much better built than the Harbor Freight ones. I have broken my Harbor Freight one 4 times so I’m tired of getting it replaced. Also picked up a 33mm and 34mm deep socket from them too because those are the only two not in my set of axle nut sockets and my friend wants me to do some work to his GMC which I’m pretty sure is a 33 or 34mm axle nut. I have a few Tekton things but not many. I normally buy Capri but wanted to put Tekton to the everyday use to see how it holds up.
.Then a Tekton 3/8 breaker bar. Much better built than the Harbor Freight ones. I have broken my Harbor Freight one 4 times so I’m tired of getting it replaced. Also picked up a 33mm and 34mm deep socket from them too because those are the only two not in my set of axle nut sockets and my friend wants me to do some work to his GMC which I’m pretty sure is a 33 or 34mm axle nut. I have a few Tekton things but not many. I normally buy Capri but wanted to put Tekton to the everyday use to see how it holds up.
Ohio Andy
Well-known member
Yeah okay, that's really smart. I'll have to give that a try. I did recreate the layout in the table where I included both the thread pitch as well as what size wrench would hold the device if I was going to use a fixed size wrench rather than one of my tab and die wrenches because for some of that I might just want to start it by hand and... It's just nice to have the information so I figured that out ahead of time while I was there, I finally sent me all the right pieces.
Ohio Andy
Well-known member
I don't suppose you added a third file that covers a few sizes that the other files don't coverDamn, thi$ forum i$ dangerou$.
Looking forward to its arrival. Thanks (I think
CTA Tools 8235 Thread Restorer File - SAE
It will fit in the box and everything..
There is some overlap, however.
four.cycle
Well-known member
Treated myself to some new tools today since I got a raise at work on Monday per my request. My coworker has this air hammer and it’s a beast. It goes on sale next month but dealer was like just go ahead and take it for that price and I’ll bring you the rest of the kit when it arrives September 1st. Sounds good to me because this air hammer is a beast and I hate having to borrow stuff so I wanted to treat myself to something new. I hardly ever buy anything off the Mac Truck mainly because he doesn’t show up but like every 2 weeks but to be fair he has a lot of health problems so I’ve forgiven him for his absence. He also warrantied my pawn shop 10mm socket that was cracked lol
Then a Tekton 3/8 breaker bar. Much better built than the Harbor Freight ones. I have broken my Harbor Freight one 4 times so I’m tired of getting it replaced. Also picked up a 33mm and 34mm deep socket from them too because those are the only two not in my set of axle nut sockets and my friend wants me to do some work to his GMC which I’m pretty sure is a 33 or 34mm axle nut. I have a few Tekton things but not many. I normally buy Capri but wanted to put Tekton to the everyday use to see how it holds up.
Wait, no pants? Did someone hack your GJ account??? Nope, single sockets, LOL...
Kidding aside, CONGRATS on getting yourself a raise!
Nice tools, BTW!
Mike
CGarage
Well-known member
Congrats, Blake. And well deserved.
RichRiddle
Well-known member
An order from Tekton arrived today including USA made chisels and mini pry bar set, along with Chinese mallets and clamps. The mallets and clamps were on close out....
BlakeTheCarGuy
ALLIANCE MEMBER
Well if you count the warranty replacement 10mm technically that was a single one plus the two single Tekton lol
. I just got too excited to open my new toy and forgot to take a picture of the 10mm lol.Heiko
Active member
I ordered them by my german dealer but waited nearly 6 month till all arrived. The coin is arround 25mm.
Greetings
Well if you count the warranty replacement 10mm technically that was a single one plus the two single Tekton lol
As you know, I'm just playing with you.
And for anyone else, while I personally prefer buying sets, I've definitely bought individual tools (and sockets) as needed over the years, especially larger ones for hubs, etc. And filling gaps (in sets), of course...
Mike
Last edited:
Ohio Andy
Well-known member
The clamps, I like those. Bought a bunch of them. Could not say no for the price.An order from Tekton arrived today including USA made chisels and mini pry bar set, along with Chinese mallets and clamps. The mallets and clamps were on close out....
Heiko
Active member
I got this picture from the New Europe catalog maybe it help a little bit
Attachments
My Lang kit has saved my *** so many times that I'm almost embarrassed. It's the perfect definition of a "don't use it often but a lifesaver when I do" tool.I finally decided to purchase a Rethreading kit so I purchased the CTA Tools 8240 Universal 53-Piece Rethreading Set, RED (Made in the USA). My original intent was to purchase the Lang or Kastar 971 kit (they are all the same kit) but the manufacturer apparently moved production to China and I wanted a made in USA set. I would find kits where the picture showed made in USA but the product description stated made in China. I figured it would be hit or miss as to whether I ended up with older stock made in USA or unknown made in China....
So, I purchased the CTA set, which is marginally larger 53 piece rather than the 48 piece set, and it was about $20 more.
The parts stay pretty well in the case. I have not used it yet. Some of the Dies are very hard to read, but my eyes do not work that well and I did not have a magnifier while I was verifying that I had the correct pieces. The primary item it is missing is an M8x1.25, not that I ever had to deal with one of those. It does have M8x1.0 (die only) and M8x1.50 Tap and Die. Note that the taps are easy to read.
A piece of paper is included that shows exactly what everything is and its location in the box. Do not lose this.
Hookeroon, used for moving firewood, logs etc. I use it while operating my firewood processor, gives me reach and grips better than my hand. I had a homemade one that I made from an old axe. I broke the wooden handle, and the price of this tool was only twice what a new handle would cost at the local hardware. This weighs half as much as the old one, and the swell at the end of the handle is much bigger and gives a better grip.
I will repair the old one, just because, but I need to make up a list of handles and order them all at once. Shipping on one handle is almost as much as on a bundle of them, as the oversized charge kicks in on the first handle, and the weight charge doesn’t go up that fast.
I will repair the old one, just because, but I need to make up a list of handles and order them all at once. Shipping on one handle is almost as much as on a bundle of them, as the oversized charge kicks in on the first handle, and the weight charge doesn’t go up that fast.
@BlakeTheCarGuy Congrats on the raise...
Question, you mentioned that you broke your Harbor Freight Breaker Bar, was it a Pittsburgh or an Icon model?
My brother broke his Pittsburgh yesterday and asked me it the Icon was any better?
I told him I'd find out and here you are..All of mine are older Protos and SKs.
Question, you mentioned that you broke your Harbor Freight Breaker Bar, was it a Pittsburgh or an Icon model?
My brother broke his Pittsburgh yesterday and asked me it the Icon was any better?
I told him I'd find out and here you are..All of mine are older Protos and SKs.
BlakeTheCarGuy
ALLIANCE MEMBER
Mine was the 3/8 model Pittsburgh. 4th time it’s broke so I just got the Tekton. The Tekton is much better built. However for my 1/2 I’ve had no problems with the Pittsburgh ones I’ve got one in the car, at work and at home and never broken any of the half inch ones. Just the 3/8.
Ohio Andy
Well-known member
So far my tektons have held up very well... They are not seeing heavy daily abuse... Occasional abuse and medium to light use.
3/8 breaker bar seems like an oxymoron to me. I definitely wouldn't put a cheater pipe on any of the ones I've owned.
How long is the handle on that, @Hal?
I have Logrite's version of a hookaroon, total back saver. Mine is around 10 years old, and uses a round-stock spike, which makes it easier to twist out of wood, especially if I sink it too far. Looks like Logrite's newer ones come with a flat spike like the Fiskars above.
The round spike is thick enough that sometimes it's difficult to get a good bite. I probably need to sharpen it. I'm wondering if the flat spike drives in more easily?
Mike
Hookeroon, used for moving firewood, logs etc. I use it while operating my firewood processor, gives me reach and grips better than my hand. I had a homemade one that I made from an old axe. I broke the wooden handle, and the price of this tool was only twice what a new handle would cost at the local hardware. This weighs half as much as the old one, and the swell at the end of the handle is much bigger and gives a better grip.
I will repair the old one, just because, but I need to make up a list of handles and order them all at once. Shipping on one handle is almost as much as on a bundle of them, as the oversized charge kicks in on the first handle, and the weight charge doesn’t go up that fast.
How long is the handle on that, @Hal?
I have Logrite's version of a hookaroon, total back saver. Mine is around 10 years old, and uses a round-stock spike, which makes it easier to twist out of wood, especially if I sink it too far. Looks like Logrite's newer ones come with a flat spike like the Fiskars above.
The round spike is thick enough that sometimes it's difficult to get a good bite. I probably need to sharpen it. I'm wondering if the flat spike drives in more easily?
Mike
Last edited:
PelicanPines
ALLIANCE MEMBER
That is why I would never own a 3/8 breaker bar. If I think ... that needs a breaker bar... I want my 1/2 or my (can't find it) 3/4 bar with an adapter
Handle is 28 inches, just the same as my old one. Just about the right length to use on the processor. The spike works well in hardwood, but I have stuck it pretty tight in pine.
four.cycle
Well-known member
@BLAKE -
3/8" drive flex handle (breaker bar) cheap. (they are common as rocks - toss him an offer for $8 bucks and he'll probably go for it.)
mine's held up fine for over 50 years.
I use it all the time when I open the 3/8" drive set - I don't often use my 3/8" ratchet, just the breaker.
YMMV
3/8" drive flex handle (breaker bar) cheap. (they are common as rocks - toss him an offer for $8 bucks and he'll probably go for it.)
mine's held up fine for over 50 years.
I use it all the time when I open the 3/8" drive set - I don't often use my 3/8" ratchet, just the breaker.
YMMV
BlakeTheCarGuy
ALLIANCE MEMBER
Some spaces are limited though and you can’t fit a 1/2 breaker bar. Sure you can use a long ratchet but don’t want to break any teeth inside the ratchet.
zmotorsports
ALLIANCE MEMBER
Armstrong double box end ratcheting wrench set--$60 from FB Marketplace. Made in the USA.
Those look almost identical to my very old Matco ratcheting wrenches. They were the first set of ratcheting wrenches purchased in the 90's and still my most used and go-to ratcheting wrench. I like having the box end to break it loose then flip the wrench to ratchet the fastener all in the same wrench. The only downside is you have to be cognitive of where you're using it as they can back you into a corner if you don't pay attention. And I mean back you into a corner literally.
Don't ask how I know but I watch that much more closely now. SO non-maring pry tools and a Lisle clip remover.
Those are my favorite non-marring prybars for doing interior work. Not that I enjoy interior work though.
PelicanPines
ALLIANCE MEMBER
I wanted a "heavier" pair of scissors for my table top workbench. Saw someone get a Milwaukee pair recently here... it was the middle of the night and I went on amazon warehouse... and found a pair for a couple of bucks and had credits ... so half blind with sleep... I bought them. They are 9"ers with thick blades and solid handles. Much nicer than I expected for a middle of the night purchase without my glasses on. Rollerball pen for size comparison.
Description said "Original package damaged".... there was no blister pack... ok...
Description said "Original package damaged".... there was no blister pack... ok...
I wanted a "heavier" pair of scissors for my table top workbench. Saw someone get a Milwaukee pair recently here... it was the middle of the night and I went on amazon warehouse... and found a pair for a couple of bucks and had credits ... so half blind with sleep... I bought them. They are 9"ers with thick blades and solid handles. Much nicer than I expected for a middle of the night purchase without my glasses on. Rollerball pen for size comparison.
Description said "Original package damaged".... there was no blister pack... ok...
Sounds like a deal! How much was a couple of bucks?
When I bought mine in 2020 they were $22.40. That specific model number has died off and its replacement is now a $27.75ish thing.