Show your new tool arrivals

[wchamberlain]

Got my green mini box from Shane 4V today, super doooper nice!

 

[Black89LX]

well I got my yellow Lisle Jeepers Creeper 93102, a spare wheel 92132, Thexton radiator drain socket set 485, KD Tools oil filter strap wrench 3149, a Lisle oil filter wrench 54300, Irwin Vise Grip 19T, and Tool Aid air hammer quick change adaptor 94400... now I have some more christmas shopping to do!

 

[RobertMo1988]

got a small box from s/o, with some repair kits, a green hard handle for my SH80a, some micro-fiber towels yayy, Finally got to finish my LSF720 new handle(blue) new guts pretty much looks and functions like its new

sorry for the blurry pictures, my lighting is insane with white countertops

 

[RhodesSpeedShop]

got a small box from s/o, with some repair kits, a green hard handle for my SH80a, some micro-fiber towels yayy, Finally got to finish my LSF720 new handle(blue) new guts pretty much looks and functions like its new

sorry for the blurry pictures, my lighting is insane with white countertops

Nice haul. Could use some of those towels....is that a new button on that last one?

 

[RobertMo1988]

Nice haul. Could use some of those towels....is that a new button on that last one?

Hey Rhodes! yea it is a new button, the ratchet is a 1/2 in a 3/8 body but it came in the kit i bought (RKRASF730), It wasnt too bad setting the new button and metal ring that goes between the gear and button(not sure what they call it) I ordered just a cap and a extra selector too, but the cap/button i got by itself was an all black plastic one, which i do not like.

The towels are buy 3 get 1 free stock # kackmcfiber4 i believe

 

[packofqtips]

just picked this up hand held inspection scope

[/IMG]

 

[RobertMo1988]

A Buy it Now I couldn't refuse.

GRRRR!!!! lol jk, i was seriously clicking buy it now probably no longer than 5 seconds after you did, i want a set so bad

 

[jeffmoss26]

Dammit motoys, those are nice!!

 

[IBJanky]

Craftsman impact socket set in metric/sae, regular/deep:

myke

 

[wchamberlain]

Just for Jeff Moss!!!!!!!!!!!!!!!! Enjoy!

Unless some other fucktard comes out with a new color, this should complete my Dale Sr ratcheting collection................Woo Hoo!!!!!!!!!!!

 

[eeprete]

Craftsman impact socket set in metric/sae, regular/deep:

myke

what kind of socket rails are those, if you don't mind me asking? Those are very nice.

 

[DARKSCOPE001]

Was at target today with the girlfriend doing shopping when i walked past the "tool" aisle. And found this little guy I have been looking for. My local Home depot and other tool centers have stoped carrying him so when I saw that target had a peg full of them I grabed one up and threw it in the basket and stomached the fact that 30 extra dollars + shopping was alot of money.


Note. cat is for clarification of size This is a nice little flashlight for the money, I needed a new one till I can afford my streamlight strion for work. If your in the market for a new one and want something above the cheap china flashlights but not a ton of money I suggest checking this thing out

Thanks
Sean Scott

 

[MoToys]

GRRRR!!!! lol jk, i was seriously clicking buy it now probably no longer than 5 seconds after you did, i want a set so bad

I've been wanting these for awhile. It was just chance that I was at my desk at the end of the day and did a quick ebay search and when I saw them, I didn't hesitate to "buy it now". Guy probably could have gotten more if he listed them auction style. Would have been you and me bidding it out.

Dammit motoys, those are nice!!

Thanks Jeff.

 

[jeffmoss26]

wchamberlain, you completed your collection only to sell it? lol
Here's a nice box of goodies I got from motoys:
Schlage sunglasses holder, 2 Sargent mortise cylinders with keys, Schlage installation gauge, Snap-On wrench, Apex bit driver, Kraeuter pliers, HES carpenters pencil, Sargent pin (miniature key), plug follower for rekeying locks, and a Yale keychain.
Thanks again!

 

[Reality Sucks]

my new mg325..dealer suckerd me into it..

 

[wafrederick]

Bought this from my Matco tool dealer on Friday:

http://www.matcotools.com/catalog/product/PBG36B/36-PRYBAR-GREEN-23ANGLE-TIP/

 

[JASTECH]

motoy? I am not up on this saying.

 

[IBJanky]

what kind of socket rails are those, if you don't mind me asking? Those are very nice.

I bought them at Harbor Freight for less than $5 for a set (1/4", 3/8", 1/2")

myke

 

[rt dak]

Thanks to Hiball...

Cornwell JRFB36

SK 40970

The Cornwell actually would have came in handy doing the spark plugs on my BMW. The SK I probably didn't need.

 

[ECP]

Bought a 1/4" drive, 14" long extension off the truck today and combined it with my spare screwdriver handle. Now I have a long driver that I can also put a ratchet on the end.

 

[ekuhn]

Bought a 1/4" drive, 14" long extension off the truck today and combined it with my spare screwdriver handle. Now I have a long driver that I can also put a ratchet on the end.

That's a damn good idea. Nice Work.

 

[MoToys]

motoy? I am not up on this saying.

Mo=more
Toys...

 

[buco]

Was at target today with the girlfriend doing shopping when i walked past the "tool" aisle. And found this little guy I have been looking for. My local Home depot and other tool centers have stoped carrying him so when I saw that target had a peg full of them I grabed one up and threw it in the basket and stomached the fact that 30 extra dollars + shopping was alot of money.


Note. cat is for clarification of size This is a nice little flashlight for the money, I needed a new one till I can afford my streamlight strion for work. If your in the market for a new one and want something above the cheap china flashlights but not a ton of money I suggest checking this thing out

Thanks
Sean Scott

Nice! have the same light!

Maglite should be commended for what they are struggling to do to keep manufacturing in the us.

 

[metalhead212121]

A Buy it Now I couldn't refuse.

what did you end up paying for them?

 

[RobertMo1988]

189 big ones

 

[ECP]

That's a damn good idea. Nice Work.

Thanks! SO makes one with the same handle... but it's not as long. My dealer is bringing me this to go on it:

http://buy1.snapon.com/catalog/item...group_ID=20016&store=snapon-store&dir=catalog


I made it for using on fender bolts behind doors or door handle fasteners. Sometimes they only give you a hole slightly bigger than the socket, and the socket will catch on the edge of the hole, come off the extension and fall to the inside at the bottom of the door. I hope to never dig for one again

Was eyeballing the 24" or 36" extensions he had..... but they wouldn't fit as nicely in my box.

 

[metalhead212121]

189 big ones

are you talking to me? If so... that price doesnt seem to be that great. I know its not the exact set but Snap on wants $169.95 for this set.

http://buy1.snapon.com/catalog/item...=21405&supersede=&store=snapon-store&tool=all

 

[RobertMo1988]

Yea! sorry i didnt quote you, my phone *****! lol. 189 isnt great but not bad but considering navy blue was only a limited edition/color and is a more uncommon color that pulls big money, but what color doesnt right lol

are you talking to me? If so... that price doesnt seem to be that great. I know its not the exact set but Snap on wants $169.95 for this set.

http://buy1.snapon.com/catalog/item...=21405&supersede=&store=snapon-store&tool=all

 

[KNS Autosport]

new additions to the shop this week so far

Blue Point valve adjustment tool

No more lighting tires on fire lol

 

[G1GRANDEUR]

At first I was so scared to use that cheater, so I let my co-worker do the work.

 

[MoToys]

Yea! sorry i didnt quote you, my phone *****! lol. 189 isnt great but not bad but considering navy blue was only a limited edition/color and is a more uncommon color that pulls big money, but what color doesnt right lol

Hey Robert thanks for answering. My sentiments exactly.
Also note I threw an extra 8" pry that I already had into the picture.
I figured a set in like new condition for slightly more than original purchase price that's no longer available... How could you go wrong, it was even free shipping.

 

[RobertMo1988]

Hey Robert thanks for answering. My sentiments exactly.
Also note I threw an extra 8" pry that I already had into the picture.
I figured a set in like new condition for slightly more than original purchase price that's no longer available... How could you go wrong, it was even free shipping.

yea you cant beat free shipping, with the length of those, they were probably looking at atleast 10-20 for shipping! so that puts you right at s/o's price. MoToys wanna sell your duplicate 8" blue prybar??? i would show you my new set of screwdrivers but im waiting till my other tools get here. MoToys, do you by chance have a single/spare Sdd4 Blue screwdriver? i guess i shoulda pm'd you but i was just typing away!!!

 

[blacK20]

The cheeta is the cats meow when it comes to seating beads. Make sure you wear ear plugs when you let that thing rip or else your ears are going to ring for the next 10 mins.

 

[chappys4life]

Picked up some body hammers and dollies. Both dollies and 3 hammers are snap on and the other hammer is Martin. I really like the handle on the Martin it has a great feel. The snap on feel a little bulky. Big thanks to Hammer1963 for hooking me up with the SO hammers.

 

[RodneyPierce]

Here is my new arrivals today. The green handled screw drivers are "high visibility screw drivers" from McMaster Carr. They cost me less then 50.00 for the 8 piece set. Made in the USA by Pratt-Read. I really like the feel of them. And then the wrench and socket organizers are Hansen:

 

[canuckian]

These badboys came in the mail today from GJ member Robertmo1988. Robert found them, bought them on my behalf and shipped them up here to the great white north! His packaging was a work of art! Got to catch up on the news in California and I now have half a roll of painters masking tape from the packing job! Awesome guy! Thanks Robert! I now have some serious rearranging to do in the orange drawer as these things are fricken loooong! Can you tell I'm a little stoked? Been looking for these a long time and this set is absolutely mint!

These showed up today as well from eBay. The bit ratchet is tiny but what a nice little kit! The Facom came with a bonus "clip" of security torx bits as well.

 

[Monte]

cool Wera set !!!!

 

[canuckian]

cool Wera set !!!!

Thanks! Was looking for the normal set until bhae posted these up and after a long hunt, I finally located them! Likely made in CZ but no mistaking where they were designed!

 

[Scuderia-F1]

Great score on those orange handles Canuckian, great "euro" score too!

 

[packofqtips]

no pic, but i just got this years snap on winter jacket (free!)