Show your new tool arrivals

[rharman]

They've come a long way from my Kreg K-2.

 

[Jure]

They claim it to be fuel resistant,we'll see how well they hold up on carbs

 

[hoston23]

They claim it to be fuel resistant,we'll see how well they hold up on carbs

Where did you get those orings from?

 

[ThePostman]

Where did you get those orings from?

That brand is sold at Lidl. I'm not going to knock them, I picked up a bunch of Dremel sanding drums from there stupid cheap.

 

[ThePostman]

Jawco m14x1.25 thread restoration tap and die thanks to a tip from someone here.

 

[jgeoffr]

Picked up the Knipex "baby bolt cutter" 71 72 460, the CoBolt compact bolt cutters 71 31 250, and the halogen bulb pliers 30 41 160.





Also picked up a mess of catalogs.

 

[LXCam]

Got this in the other day. It's an oxycilic acid vaporizer for treating my honey bee hives for mites when they are at minimum population and eggs before spring and winter. Runs off my dewalt batteries. I treated my 6 hives in the time it took me to do 2 hives with my old 12v wand lugging a 12v car battery around. Much more back friendly.

20240209_171622 by NakeDiesel, on Flickr

Sooooo you’ve got your bees tripping on acid??

Dude you know how to


Seriously though. I had no idea such a thing was so mainstream that a company like dewalt would make it. Is it strictly for that chemical or for any type of vaporizing?

 

[f121]

Seriously though. I had no idea such a thing was so mainstream that a company like dewalt would make it. Is it strictly for that chemical or for any type of vaporizing?

Looks like an aftermarket thing that uses dewalt batteries. This is happening more and more, lots of aftermarket lamps on Amazon for the various battery platforms, I even saw a battery shot blaster that took Milwaukee batteries the other day.

 

[SC Fly Guy]

Picked up a few accessories to fill out my ‘Drill/Driver Packout’ box. Sorry for the goofy pictures - I’m having a little trouble uploading. I also picked up the 1/4”-3/8”-1/2” adapter set.

 

[Lowlevel2021]

Couple items for my Milwaukee 18v inflator.

 

[Jure]

Where did you get those orings from?

Lidl,its a chain store in the EU only.

 

[wandrur]

The rest of my haul from earlier this week.

 

[mikeinri]

The rest of my haul from earlier this week.

Let us know how that heater works out for you. I thought about buying one for working in the shed (12x24, uninsulated).

Mike

 

[KnurledNut]

Snap-on CP9 cotter pin puller:

 

[wandrur]

Let us know how that heater works out for you. I thought about buying one for working in the shed (12x24, uninsulated).

Mike

WIll do! I had it going for about 20 minutes in mid-30s weather. The temp raised (gradually) about three degrees in my 12x14 insulated shed. Being anywhere within 3-5 feet of it was easily felt. I'm really glad I got it and look forward to burning through a propane can on a cold day!

 

[NakeDiesel]

Sooooo you’ve got your bees tripping on acid??

Dude you know how to


Seriously though. I had no idea such a thing was so mainstream that a company like dewalt would make it. Is it strictly for that chemical or for any type of vaporizing?

Yes, they be trippin...

Dewalt doesn't make it. They are made in Hungary and imported to the US.

 

[1320]

Snap-on CP9 cotter pin puller:

Can you give some feedback on eBay you've used it a bit? I've been thinking about getting one of these...

 

[SC Fly Guy]

Lidl,its a chain store in the EU only.

There are Lidl stores in the US.

 

[ThePostman]

Lidl,its a chain store in the EU only.

Actually they are quite prominent on the East Coast mid-Atlantic area

 

[Stubby1743]

There are Lidl stores in the US.

And in the UK, but I doubt that the products on sale are the same in all countries.

 

[Jure]

Actually they are quite prominent on the East Coast mid-Atlantic area

Had no idea they are present in the states as well..

 

[haveissues]

Certainly not new but new to me! Picked up a pretty awesome 18" bandsaw for $50 (yes, $50!) and a spot welder for $100. The bandswaw has a pneumatic feed and the blade speed adjusts from 20-5000. Even came with a few rolls of blade!

 

[Wiz02]

Certainly not new but new to me! Picked up a pretty awesome 18" bandsaw for $50 (yes, $50!) and a spot welder for $100. The bandswaw has a pneumatic feed and the blade speed adjusts from 20-5000. Even came with a few rolls of blade!

I think that rates GJ's highest accolade: You **** !

 

[haveissues]

I think that rates GJ's highest accolade: You **** !

Thanks!

 

[LXCam]

Thanks!

Oh gezzz, you absolutely ****!!!!



Nice snag bud

 

[NakeDiesel]

Sooooo you’ve got your bees tripping on acid??

Dude you know how to


Seriously though. I had no idea such a thing was so mainstream that a company like dewalt would make it. Is it strictly for that chemical or for any type of vaporizing?

here's a video of them demoing the vaporizer on hives using Makita batteries:

 

[rmack898]

And saw suckage for sure

 

[jobo1004]

Had no idea they are present in the states as well..

They've only been here since June 2017, so in the grand scheme of things they haven't been here long, but they're expanding.

 

[wandrur]

I've got a Lidl just down the road from me.

On topic: Finally received the last of my impulse buys.

 

[Lowlevel2021]

Been waiting for HD to get the insider in stock since it was released, ACME came through with a Valentine’s Day discount.

 

[Steve_P]

I've got a Lidl just down the road from me.

On topic: Finally received the last of my impulse buys.

Nice. If you don't already have it, you should get the Wiha #2 Xeno driver for home electrical work- it'll probably be your most used. It's perfect for those annoying slotted/phillips combo screws used on outlets and switches - although a square bit also works on them. I also have a power bit in that style for a cordless screwdriver.

 

[ArmyVW_GuyInTX]

Not new, but last week's estate sale bargains. The Knipex and other misc were $2 each, the Snap on wrenched had been $10 each but they dropped them to $5 each. The "Mazda" engraved letter opener was $0.75.

 

[mikeinri]

I think that rates GJ's highest accolade: You **** !

Several of you beat me to it: @haveissues ***** massively for those two!!!

The spot welder gives me flashbacks of a summer job I had over 30 years ago. Never did master that thing...

Mike

 

[Mr onetwo]

"BoxJaw"...great for working within a box or panelboard

 

[jgeoffr]

In the "why not for $15 category" is the Ridgid K-D6H 6' toilet auger.

I'm banking on needing it at one point and then it'll have paid for itself...

 

[Qualitytools]

In the "why not for $15 category" is the Ridgid K-D6H 6' toilet auger.

I'm banking on needing it at one point and then it'll have paid for itself...

Where did you get that for $15?

 

[demarpaint]

Where did you get that for $15?

+1 for $15 I'm in!

 

[PelicanPines]

Couple items for my Milwaukee 18v inflator.

You triggered me to pull the trigger on that Air Chuck... I also got the "Normally Open" because I will be attaching it to my Astro 3082 Tire Inflator. Used a small credit ... got it for $30.02... will be delivered Tuesday

 

[jgeoffr]

Where did you get that for $15?

Amazon.sa



SAR58.45 is equal to $15.59.

It's now running much more than that locally...

Not sure how the pricing discrepancy happened, but I'll take it.

 

[PelicanPines]

Amazon.sa



SAR58.45 is equal to $15.59.

It's now running much more than that locally...

Not sure how the pricing discrepancy happened, but I'll take it.

I have one of those... never used it... it's got to be 30yrs old. I have been successful using a machete and toilet plunger.

My toilet has NOT clogged since my niece stopped visiting.