Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
four.cycle
Well-known member
mikeinri said:
At first glance, I would fully agree with you there, but.....
I haven't used THAT Snap-on puller so I'm going to refrain from comment on that one but....
I WILL submit that when I paid the $120 for the Posi-Lock I was kind of thinking the same thing: "Is this thing really worth it?"
After I'd pulled off half a dozen hubs off rusted lawnmower cranks (which can really be a ***** on some) I posted somewhere on this very same website "probably one of the best tool purchases I have ever made".
(My memory fails at times.. I actually paid $120 including tax, according to my previous post on this.)
A device that's going to do both "innie" and "outie" and has a decent size range and performs is well worth north of $400, in my humble opinion.
I mean..... how much time are you willing to invest fighting with that pulley or gear?
I sold the last lawnmower today. I don't think I want to do any more. I have three more outside, but I'm thinking maybe just "garden hose rebuild" and dump 'em cheap. Too much hassle pullin' those damn hubs off.
BobsYourUncle69
Well-known member
This arrived
Usually I'd not have posted this but it's actually decent solder wire so thought it worth the post
Been battling to find decent soldering wire. Used to walk into a store and buy some now it's online and hit /miss
SainSmart 0.6mm Solder Wire 63/37 Tin/Lead Sn63Pb37 with Flux Rosin Core for Electrical Soldering (100g /0.22lbs) https://www.amazon.com/dp/B07PDC2D85?tag=atomicindus08-20
Usually I'd not have posted this but it's actually decent solder wire so thought it worth the post
Been battling to find decent soldering wire. Used to walk into a store and buy some now it's online and hit /miss
SainSmart 0.6mm Solder Wire 63/37 Tin/Lead Sn63Pb37 with Flux Rosin Core for Electrical Soldering (100g /0.22lbs) https://www.amazon.com/dp/B07PDC2D85?tag=atomicindus08-20
Last edited:
MrPink
Well-known member
Kids gave me my father's day gift early. I needed a new folding razor knife for work. And I saw this Klein one on Amazon.
So far it's nice.
So far it's nice.
Jeff
Well-known member
NOS on Amazon.Did you travel back in time or did you find old stock?
lamesalegend
Member
- Joined
- Jun 18, 2011
- Messages
- 17
Me too, been searching for the SK tool ,mainly cause I have all the matching SK indexing pry bars. Thanks for sharing this. I will stop looking for the SK nowWelp. after more than a year searching for a new or used SK Indexing Head Body Clip Puller (6646) and having signed up for various tool distributor's 'email me when back in stock' lists with no reply, and alerts set up on ebay if one listed new or used and still, coming up crickets, I finally added a post to a thread about the SK tool asking if anyone might know where I might find one or if anyone else makes anything similar and sure enough, Marv's Shop replied with exactly the answer I needed.
I didn't even know these existed. GJ does it again.
MATCO 4pc Indexing Body Clip puller set ICL4G.
Luv'em!
At first glance, I would fully agree with you there, but.....
I haven't used THAT Snap-on puller so I'm going to refrain from comment on that one but....
I WILL submit that when I paid the $120 for the Posi-Lock I was kind of thinking the same thing: "Is this thing really worth it?"
After I'd pulled off half a dozen hubs off rusted lawnmower cranks (which can really be a ***** on some) I posted somewhere on this very same website "probably one of the best tool purchases I have ever made".
(My memory fails at times.. I actually paid $120 including tax, according to my previous post on this.)
A device that's going to do both "innie" and "outie" and has a decent size range and performs is well worth north of $400, in my humble opinion.
I mean..... how much time are you willing to invest fighting with that pulley or gear?
I sold the last lawnmower today. I don't think I want to do any more. I have three more outside, but I'm thinking maybe just "garden hose rebuild" and dump 'em cheap. Too much hassle pullin' those damn hubs off.
My comment about the SO puller might have been overly harsh, in hindsight (although I'd still feel like I was getting fleeced at that price).
Having said that, as I DIY guy, I managed to destroy a rented puller from AutoZone once, using hand tools (no impact gun at that time). Something basic like pulling a hub off an old Ford Explorer.
Stripped the screw, which apparently never happens, judging by the look on the AZ guy's face when I returned it. Rented a different one from Advance Auto to finish the job.
Mike
cody1325
Well-known member
Since my Grandmother said she'd be using the Craftsman V20 weed whacker a lot for light use, and seeing how poorly the 2 AH battery performed (I got like 20 minutes out of it), agreed we should buy bigger ones.
Thus, those (currently charging) and a free 20V impact on the promo--which is for use by both of us since she bought them. So, 2+4+6 should get decent runtime with any of the tools.
And my purchases:
Klein Tools Flip Blade with Impact Driver bit. I have never found a utility blade I like very well--and only use them for dirty work. But, they're far better for beater tasks as blades are cheap. This one will replace a Leatherman Crater C33T.
I have to say, it's pretty well made. Blade locks at both an angle (for cutting carpet and cable) and full-open. Screwdriver has a linerlock.
I wonder if Klein sells these bit holders individually? I like that it's shorter than most.
Klein precison screwdriver set. $4 on sale.
Ideal outlet tester. I have found bootleg grounds all over the house with my meter, and since my old outlet tester is busted, I found this ne on the clearance rack.
Mine Supply.
Needed a 7/16 wrench to finish a project (as my existing crappy one kept slipping), and was informed there'd be a $9 service charge since the order was under $20 and I was using a card (should've cashed a check first...). The guy had no problems taking me inito the warehouse's tool areas. I felt like a kid in a candy store. They sell Proto, Urrea, SK (which is being cleared out as Great Star was a PITA to deal with warranty), old Stanley, and Klein (as well as Council hammers and axes).
Well, that turned a ten-dollar Proto wrench into $70....
Proto Anti-Slip 7/16 (PS--same as Mac Knucklesaver), SK 7/16, and SK 7/16 flex head (which I didn't realize was twenty bucks...).
If they weren't so darn expensive, I'd go for a whole set of those flex-heads. They'll fit in places a ratchet or wrench won't.
SK 12mm, which I found just randomly laying on a shelf. The guy let me have it for free because it was no longer in the inventory system. Tool sales have been slow with the coal industry in a slump.
Urrea (ex-Proto tooling) 9606. Cheap, mostly. I also really like the handle on this one. It's been there a while, but thankfully, it's not the stinky kind of cellulose acetate (which is why my screwdriver drawer now smells like throw-up).
Going back to see if I can build a full set of these--they're less than four bucks each, and really well-made for the price. Though--no Torx. Just slotted and Phillips.
Klein Tools D326.
I am willing to bet this sucker is older than me. Isn't in Klein's catalog anymore. No barcode on the box. I admit, the box was what drew me to it. Not sure if I'm going to use or collect these--as I need a pair of small duckbills that aren't ****.
Thus, those (currently charging) and a free 20V impact on the promo--which is for use by both of us since she bought them. So, 2+4+6 should get decent runtime with any of the tools.
And my purchases:
Klein Tools Flip Blade with Impact Driver bit. I have never found a utility blade I like very well--and only use them for dirty work. But, they're far better for beater tasks as blades are cheap. This one will replace a Leatherman Crater C33T.
I have to say, it's pretty well made. Blade locks at both an angle (for cutting carpet and cable) and full-open. Screwdriver has a linerlock.
I wonder if Klein sells these bit holders individually? I like that it's shorter than most.
Klein precison screwdriver set. $4 on sale.
Ideal outlet tester. I have found bootleg grounds all over the house with my meter, and since my old outlet tester is busted, I found this ne on the clearance rack.
Mine Supply.
Needed a 7/16 wrench to finish a project (as my existing crappy one kept slipping), and was informed there'd be a $9 service charge since the order was under $20 and I was using a card (should've cashed a check first...). The guy had no problems taking me inito the warehouse's tool areas. I felt like a kid in a candy store. They sell Proto, Urrea, SK (which is being cleared out as Great Star was a PITA to deal with warranty), old Stanley, and Klein (as well as Council hammers and axes).
Well, that turned a ten-dollar Proto wrench into $70....
Proto Anti-Slip 7/16 (PS--same as Mac Knucklesaver), SK 7/16, and SK 7/16 flex head (which I didn't realize was twenty bucks...).
If they weren't so darn expensive, I'd go for a whole set of those flex-heads. They'll fit in places a ratchet or wrench won't.
SK 12mm, which I found just randomly laying on a shelf. The guy let me have it for free because it was no longer in the inventory system. Tool sales have been slow with the coal industry in a slump.
Urrea (ex-Proto tooling) 9606. Cheap, mostly. I also really like the handle on this one. It's been there a while, but thankfully, it's not the stinky kind of cellulose acetate (which is why my screwdriver drawer now smells like throw-up).
Going back to see if I can build a full set of these--they're less than four bucks each, and really well-made for the price. Though--no Torx. Just slotted and Phillips.
Klein Tools D326.
I am willing to bet this sucker is older than me. Isn't in Klein's catalog anymore. No barcode on the box. I admit, the box was what drew me to it. Not sure if I'm going to use or collect these--as I need a pair of small duckbills that aren't ****.
Last edited:
I don’t have the same ones but I am surprised how many times I use them.Skin wedge tools finally arrived. Couldn't find any in Europe so I had to order them from the US. Aliexpress only had the China made variants.
Today I used them to spread a caliper that is notorious to turn to garbage if you cross tread the fine thread they used, worked great, pins could have used a lube but the tire is near und of life and the bike had a lot of finger F’ing and I was not my issue today.
Got these at a neighbor's garage sale for a $1.00
I first saw the 1/4" breaker; never seen one before and it was so cute that I had to take it home. Then I saw the ratchet/socket set and got them. The sockets are metric; 5.5, 6-13 and 7-10 deep; one was shy and hid during the family picture.
The breaker has a V manufacturer code, the ratchet is a VT, and the sockets are G2.
I first saw the 1/4" breaker; never seen one before and it was so cute that I had to take it home. Then I saw the ratchet/socket set and got them. The sockets are metric; 5.5, 6-13 and 7-10 deep; one was shy and hid during the family picture.
The breaker has a V manufacturer code, the ratchet is a VT, and the sockets are G2.
four.cycle
Well-known member
mikeinri regarding pullers said:
We rented out every model puller made by Indestro and CTA - the big slide-hammer jobs, hub pullers, axle pullers, lots of harmonic balance pullers.
They came back as "warranty" quite frequently. We always replaced them, notwithstanding clear evidence they'd been hit with a rattle gun.
I didn't take your comment as "harsh", but again, I've never had THAT model puller in my hands so I'm going to have to refrain from commenting.
mikeinri regarding pullers said:
I can count all my Snap-on pieces on my 9 fingers: I have some tiny 1/4" drive 12-point metric deep-wells I had to buy when I got the Ranger, and a TM739 ratchet when my old Indestro finally died after 30+ years.
I definitely felt I had been fleeced when I stepped off that white truck.
My bittersweet tool haul from one of my favorite tool stores’ going out of business sale.
Mitutoyo wooden caliper storage box, Bahco Swedish hacksaw, Platinum Tech dbe flex ratcheting wrench set, Starrett measurement handbook and micrometer adjustment wrench, Orbis angle pliers and cutters, vintage Chicago Pneumatic hat, SK France interchangeable snap ring plier, store branded Lutz utility knife, pair of Showa work gloves. The hat was a freebie throw in knowing I’ve got family from Chicago.
I've had that hacksaw for ~10 years and love it. I remember the price being painful, but it was totally worth it after I used it the first time.
I still have a 1/4” Craftsman breaker bar for more years than you have been alive, purely a guess, I don’t think I have ever used it and surely not because “It was the right tool” LOLGot these at a neighbor's garage sale for a $1.00
I first saw the 1/4" breaker; never seen one before and it was so cute that I had to take it home. Then I saw the ratchet/socket set and got them. The sockets are metric; 5.5, 6-13 and 7-10 deep; one was shy and hid during the family picture.
The breaker has a V manufacturer code, the ratchet is a VT, and the sockets are G2.
Don’t care, I like my tools.
I have a bunch of Posi Lock pullers and as ridiculously expensive as they are, they're so nice to use. If you look on their website, they list a maximum torque; I think it's on the drawing. Something to keep in mind as the tooth thickness, or height, is very thin in comparison to most pullers. Maybe the new ones are marked with the torque but mine weren't.
Yes, they are not reversible. At least the pullers I have aren't.
I'm almost at the 3/4 point of my 70th decade.
I never saw (or more probably never noticed them in Sears). I have no expectations of ever using it, I just had to have it!
Got these at a neighbor's garage sale for a $1.00
I first saw the 1/4" breaker; never seen one before and it was so cute that I had to take it home. Then I saw the ratchet/socket set and got them. The sockets are metric; 5.5, 6-13 and 7-10 deep; one was shy and hid during the family picture.
The breaker has a V manufacturer code, the ratchet is a VT, and the sockets are G2.
Assuming those are USA, and $1 for the whole enchilada, You absolutely ****!
Even at $1 per piece, that's a bargain.
Mike
four.cycle
Well-known member
^ No kidding. I just sold half that much - same kind of Craftsman stuff 1/4" drive - for $27 on ebay
Chrome Vanadium Cody
Well-known member
- Joined
- Jul 25, 2021
- Messages
- 663
Yeah I’d seen people posting about them on here but this was the first time I’ve seen/noticed one in person. Definitely feels more solid than the old USA Craftsman I’ve been using.
KnurledNut
Well-known member
Nice score on the sockets. That puller looks fantastic.More from the dealer, BOGO on the sockets. $50 off the puller.
I dont normally recommend cheap pullers, but I've had good success with a similar style 2/3 jaw I picked up from Gray Tools under their imported Dynamic line: D093001.
Not nearly as fancy as the Snap-on, but it has been surprisingly robust for some of the jobs I've used it for. I've had it probably 7 years.
https://www.amazon.com/Dynamic-Tools-D093001-Capacity-Adjusting/dp/B013H1TSIS/?tag=atomicindus08-20
Last edited:
Picked up this beast of a set, 81lbs of hydraulic power. I kinda wish I got the 4ton so it would be easier to transport but they were the same price ($250 for 4ton, $260 for 10ton on sale, normally $360) so I couldn’t turn down the increased capacity.
I bought it for some DIY collision repair but ended up using it first to level my fridge out. Super nifty!
I bought it for some DIY collision repair but ended up using it first to level my fridge out. Super nifty!
They are all marked USA and were only $1.00.
Neighbor is an older widow and my wife and I help her with the outside work she has physical problems doing. I was going to pay the asking price ($10.00 total, she wanted $0.00, and we settled on $1.00).
Been running into a lot of SS screws at work where a magnetized bit holder won't hold em. Decided to go back to trying screw starters. I bought the Craftsman/Ullman ones back in Sears days, for philips & slot heads, can't ever remember using them.
These were said to work with torx & hex so I decided to give em a try. Also bought one for nuts. The one for nuts looks similar but just has steps on the jaws. Hopefully they work ok, if not I'll toss em in the drawer at home with the Craftsman ones.
And another magnet (I have the same BP one from 25 yrs ago), I believe these are made by Ullman also just like my old Craftsmans. Oddly I bought an Ullman one from AMZ months ago but it didn't say Ullman on it (came in Ullman packaging) but the ring that prevents side magnetism or whatever was very poorly made.
A couple of OTF (fully automatic) utility blade knives. The one on top is way too big (Microtech copy). Been carrying/using the smaller one at work.
These were said to work with torx & hex so I decided to give em a try. Also bought one for nuts. The one for nuts looks similar but just has steps on the jaws. Hopefully they work ok, if not I'll toss em in the drawer at home with the Craftsman ones.
And another magnet (I have the same BP one from 25 yrs ago), I believe these are made by Ullman also just like my old Craftsmans. Oddly I bought an Ullman one from AMZ months ago but it didn't say Ullman on it (came in Ullman packaging) but the ring that prevents side magnetism or whatever was very poorly made.
A couple of OTF (fully automatic) utility blade knives. The one on top is way too big (Microtech copy). Been carrying/using the smaller one at work.
Deen.J branded electric screwdrivers. Deen mini bit holders, well these are from their hook & pick sets, I just got the handles to use as mini screwdriver handles. Some Vessel spring bits & Makita bit pieces.
Cases for for the Deen.J electric screwdrivers. These are copies of the Vessel USB220 screwdriver cases but since I don't have Vessel electric screwdrivers & these were much cheaper I got these instead.
Cases for for the Deen.J electric screwdrivers. These are copies of the Vessel USB220 screwdriver cases but since I don't have Vessel electric screwdrivers & these were much cheaper I got these instead.
cody1325
Well-known member
Picked up this beast of a set, 81lbs of hydraulic power. I kinda wish I got the 4ton so it would be easier to transport but they were the same price ($250 for 4ton, $260 for 10ton on sale, normally $360) so I couldn’t turn down the increased capacity.
I bought it for some DIY collision repair but ended up using it first to level my fridge out. Super nifty!
I've wanted a Porta Power since I was a kid for some stupid reason (actually, the 1981 EMT textbook my folks had used it for everything the rescue squad would use the Jaws for today) as the previous version was always in the HFT catalogs my Granddad got back then. Definitely good for more than just bodywork. Eventually, I'll get one on a HFT trip when I have the coupon. For a lot of stuff, I'm sure it's probably better than dragging out the heavy Simplex railroad jack every time something needs lifted.
cody1325
Well-known member
Nice group!Been running into a lot of SS screws at work where a magnetized bit holder won't hold em. Decided to go back to trying screw starters. I bought the Craftsman/Ullman ones back in Sears days, for philips & slot heads, can't ever remember using them.
These were said to work with torx & hex so I decided to give em a try. Also bought one for nuts. The one for nuts looks similar but just has steps on the jaws. Hopefully they work ok, if not I'll toss em in the drawer at home with the Craftsman ones.
And another magnet (I have the same BP one from 25 yrs ago), I believe these are made by Ullman also just like my old Craftsmans. Oddly I bought an Ullman one from AMZ months ago but it didn't say Ullman on it (came in Ullman packaging) but the ring that prevents side magnetism or whatever was very poorly made.
A couple of OTF (fully automatic) utility blade knives. The one on top is way too big (Microtech copy). Been carrying/using the smaller one at work.
I have a couple Proto screw starters I inherited from my Granddad, but I really need to consider adding those myself. That nut starter would, most definitely, save a lot of swear words and lost hardware.
An OTF utility knife you say? May end up getting one of the smaller ones myself. Boker has their Kalashnikov in utility form. However, since most utility knives are basically button-lock gravity knives, I've not really considered it that necessary.
d.mcfarland
Well-known member
Link for the handles? Could be very useful for odd projects like yours.
DEEN フィックスビットハンドル DNBLSH
ec.f-gear.co.jp
Last day of the HF sale. Picked up an electric pole saw for $50 - regular $65.
Our neighbor behind us has a huge overgrown line of hedges along the common block wall. Privacy for his pool. We trim anything overhanging our side. Some of it is WAY too high to safely get with a ladder and my hedge trimmer or loppers. I'd really like him to lop off about 6'-8' off the top all across. Don't see it happening though.
Our neighbor behind us has a huge overgrown line of hedges along the common block wall. Privacy for his pool. We trim anything overhanging our side. Some of it is WAY too high to safely get with a ladder and my hedge trimmer or loppers. I'd really like him to lop off about 6'-8' off the top all across. Don't see it happening though.
Another tool haul.
Snap-on 10pc pliers start set. I got it for 150 euros + shipping + tax.
New 5" pliers set
New Hex bit sockets
I expanded my 10-19mm flank drive plus wrench set with new 20-25mm set and used 7-9mm. Also got XDHFM810 double box end wrench and Torx socket set (missing T27) and 17mm flare nut socket.
And low profile 1/4" socket set
Snap-on 10pc pliers start set. I got it for 150 euros + shipping + tax.
New 5" pliers set
New Hex bit sockets
I expanded my 10-19mm flank drive plus wrench set with new 20-25mm set and used 7-9mm. Also got XDHFM810 double box end wrench and Torx socket set (missing T27) and 17mm flare nut socket.
And low profile 1/4" socket set
Attachments
Yes the ability to apply that much force in all sorts of areas that are too small for a Jack is a powerful feature for sure. It opens up all sorts of possibilities
captain14
Well-known member
rharman,Last day of the HF sale. Picked up an electric pole saw for $50 - regular $65.
I missed that sale. I have been watching the price but I guess life got in the way. Please post up your thoughts of the saw after you use it.
I do have a couple of the manual pole saws but they get awkward to use fully extending.
stonesfan68
Well-known member
My M18 batteries are old and flakey. I bought the batteries, charger and recip saw at Home Depot for a total of $200. Considering the saw itself is $129 I think it was a good deal.
Another tool haul.
Snap-on 10pc pliers start set. I got it for 150 euros + shipping + tax.
New 5" pliers set
New Hex bit sockets
I expanded my 10-19mm flank drive plus wrench set with new 20-25mm set and used 7-9mm. Also got XDHFM810 double box end wrench and Torx socket set (missing T27) and 17mm flare nut socket.
And low profile 1/4" socket set
What a haul. Love those hex sockets, best non-RBRT style ones I've ever used.