To avoid these ads, REGISTER NOW!

Show your new tool arrivals

To avoid these ads, REGISTER NOW!
C

captain14

Well-known member
Joined
Dec 19, 2012
Messages
7,036
Location
Near College Park Maryland 20740
Went to my closest Lowe’s to pick up my order of the Kobalt 1/4” socket and tool kit that was on thier desk of the day sale for $10 each .

They had a rack of the Marshalltown tools by the contractors desk. Had someone check prices and they were all lower than the yellow signs showed.
 

Attachments

  • IMG_1972.jpeg
    IMG_1972.jpeg
    1,022 KB · Views: 117
  • IMG_1971.jpeg
    IMG_1971.jpeg
    858 KB · Views: 97
N

Nobody-named-Olli

Well-known member
Joined
Jan 9, 2025
Messages
1,584
Location
North Rhine-Westphalia; Germany
LXCam said:
Thanks oili. I looked at those and considered it. I guess it might be my only option.
Click to expand...

Took me a bit to find the old pictures. I bought this from Bosch‘s consumables and accessories line-up back in the day. (Fun fact: Back then Bosch (Professional) had a set of 5 printed consumables and accessories catalogs, you were actually able to find ”gems” like this Wera made bit driver, and quite a bit more.)

IMG_2996.jpeg

IMG_2994.jpeg

The one issue I had with this driver was that it always felt like you were twisting both parts against each other depending on how difficult to remove/ stuck a fastener/screw/bolt was. I didn’t like that.

What I liked was the “pop-up” function & removable long Rapidaptor bit-holder.

I found this to replace it:

IMG_3909.jpeg

IMG_3910.jpeg

IMG_3911.jpeg

Snap-on listed Czech Republic as COO, that explains everything. ;)

Still available. https://shop.snapon.com/product/Pop...iamond-Bit-Set/Pop-Up-Shank-Screwdriver/SGDQ6

Back in the day I got the full kit: https://shop.snapon.com/product/Pop-Up-Screwdriver-and-Diamond-Bit-Set/Screwdriver-Kit/SGDQ16KT

Just for your information. :)

Kind regards,
Olli
 
B

Beerhippie

Well-known member
Joined
Oct 13, 2023
Messages
9,739
Location
Far NE Oregon
Another new arrival to the shop:

54285429499_f924550242_b.jpg

I see folks here are pretty impressed with this stuff, so decided to give it a try. Hell, it's lanolin-based, so I can use it for hand cream, too!

I applied it to the brewery tools this morning. That'll be a good test of its rust-prevention ability as they're pretty much wet all the time.

I was pulling the straw out of the tape this morning and thinking: "Why don't they just put a clip or something to hold the damned straw that'll be lost in about ten minutes?" when I noticed the clip on the cap. Kudos!
 
B

BobsYourUncle69

Well-known member
Joined
Dec 21, 2023
Messages
418
Location
Westchester New York
-Gedore 2098 1/4 handle - Slovenia as per amazon
-Gedore 8000 circlip Pliers-Austria
-Cheapie soldering iron for my Makita batteries do so soldering in the car etc -China
-And last but not least , my US conditional greencard arrived today as well , that's a tool so I included it -USA
 

Attachments

  • 20250124_141655.jpg
    20250124_141655.jpg
    1 MB · Views: 120
  • 20250124_154835.jpg
    20250124_154835.jpg
    849.3 KB · Views: 119
Last edited:
R

ricleh

Well-known member
Joined
Nov 2, 2007
Messages
1,447
Location
Sacramento, CA
LXCam said:
Gentlemen or any body else ;). Both my Wera bit sets use thee same 816 handle which is just to damn small for my hands. I went to their site to see what options there might be but no luck determining what diameter other handles are.

Does anyone happen to know if they even make one with the bit latching feature?. I'm sure I can go with theirs or anyone else's magnetic universal handle but I'm annal about matching sets so....

Thanks :beer:
Click to expand...
3 different size Wera handles I have.
 

Attachments

  • L1020762.JPG
    L1020762.JPG
    1,004.5 KB · Views: 103
C

CHI_Tool&Die

Well-known member
Joined
Jul 20, 2021
Messages
1,384
Location
Chicago, IL
BobsYourUncle69 said:
-Gedore 2098 1/4 handle -presume Germany
-Gedore 8000 circlip Pliers-Austria
-Cheapie soldering iron for my Makita batteries do so soldering in the car etc -China
-And last but not least , my US conditional greencard arrived today as well , that's a tool so I included it -USA
Click to expand...
Don’t lose that green card! 2/3rds of my shop are guys from Europe and one or two have lost their cards on accident and they had a hell of a time getting it all sorted out. Actually, now that I think about it, I might be one of two guys in the shop that is not a dual-national or foreign national. Man, I’m lame in comparison. 🤣
 
To avoid these ads, REGISTER NOW!
O

Outlier

Well-known member
Joined
Mar 15, 2015
Messages
105
Location
GA
Still can't seem to post pictures.

Bought this to compare to the Capri Windstorm EX blow gun. It's half the cost and comes with the extra extensions and fittings. Appears to be the same manufacturer as Husky @ Home Depot and Hyper Tough @ Walmart but comes with all the extras for cheaper.


capritools.com

Windstorm EX Air Blow Gun

The Capri Tools Windstorm EX Air Blow Gun delivers powerful air flow at 72 CFM. It gives you efficient coverage over large work areas.
capritools.com capritools.com
 
Last edited:
O

Outlier

Well-known member
Joined
Mar 15, 2015
Messages
105
Location
GA
O

Outlier

Well-known member
Joined
Mar 15, 2015
Messages
105
Location
GA
Finally came across a need for a SAE socket set so I ordered these and they came in today.

www.homedepot.com

GEARWRENCH 3/8 in. Drive 6-Point SAE Standard & Deep Impact Socket Set (25-Piece) 84919N - The Home Depot

Enhance your cars performance with clean connections using GEARWRENCH Drive Standard and Deep Impact SAE Socket Set. to use.
www.homedepot.com

I took the day off today so I burned time walking around Home Depot and picked up both of these Milwaukee knives to use at work.

www.homedepot.com

Milwaukee FASTBACK Compact Folding Utility Knife with General Purpose Blade 48-22-1500 - The Home Depot

Milwaukee FASTBACK Compact Folding Utility Knife allows users to make quick, tool-free blade changes for maximum jobsite efficiency. Easy to handle.
www.homedepot.com

www.homedepot.com

Milwaukee Side Sliding Utility Knife 48-22-1515 - The Home Depot

Get prepared for anything in your adventures life by choosing this durable Milwaukee Side Sliding Utility Knife. Comes in a magnetic cover.
www.homedepot.com
 
Last edited:
P

PugetDude

ALLIANCE MEMBER
Joined
Mar 13, 2013
Messages
22,372
Location
Superstition Mountains, AZ
Beerhippie said:
Now I get to spend the next hour or so transferring all the custom settings from the old camera to the new. Nikon allows one to customize the hell out of these semi-pro cameras, but getting them set entirely to my liking requires changing a lot of settings.

I got the M2A1 Water and Dust Proof Faraday Cage made up:

54282881322_54c0af5a04_b.jpg

Some foam padding inside:

54282881297_cc88b82a1f_b.jpg

Now to make a nice tinfoil hat....
Click to expand...
Lead... You need lead.
 
O

ozaudio

Well-known member
Joined
Jun 8, 2020
Messages
99
Location
uk
wera torx drivers amazon, got them2 months ago and not even opened them yet, £28 i think
wera torx bit set, bought these as i decided to knock out the bits from a cheap set i had and press the wera ones in, plus you get a few of each size.
4 hex 1/2 sockets free from a mate
gedore 6 and 8 mm spanner free.
3/8 cheap ratchet , i was gifted this , he paid £5 for it from temu and its brilliant for a cheapo thing, he knew i was debateing a milwaukee m12 version for months and bought it for me haha

001.jpg
002.jpg
003.jpg
004.jpg
005.jpg
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom