Show your new tool arrivals

[98TJ]

A couple trades courtesy of the Classifieds.

-Jeff

I don't know what it is - the picture or what, but when I saw that picture and read your post I thought "Now THAT is cool."

 

[JSBriggs]

the 3/8 Is a Matco BR8, the 1/2 is a 4490 dual pawl Wright and 1/4 is a 2492 HD single pawl Wright.

I might open up the Matco and see if the guts to my 3426 dp will fit.

-Jeff

 

[dieselmike]

<a href="http://s279.photobucket.com/albums/kk127/4banger85/?action=view&current=f6d4761a.jpg" target="_blank"><img src="http://i279.photobucket.com/albums/kk127/4banger85/f6d4761a.jpg" border="0" alt="Photobucket"></a>

the only thing not made in europe/north america is the craftsman plastic case

LOVE the pratt read pick set

 

[Farmer Joe]

nice coors

 

[Hyster Gareth]

Visited the CAT store today. Don't know much about the little light but it was on sale and I have always had good luck with pelican products.

Very Nice how much was the screwdriver with tax?

Thanks Gareth

 

[Hyster Gareth]

Some of my new purchases CAT goodness.

Thanks Gareth

 

[wchamberlain]

Some of my new purchases CAT goodness.

Thanks Gareth

Hyster,

Looking good, is that from a local CAT store?

 

[Hyster Gareth]

Yes from my local CAT dealer

 

[Sterff]

Some of my new purchases CAT goodness.

Thanks Gareth

Nice! Ill have to stop and check out the angle wrenches

 

[canuckian]

Some of my new purchases CAT goodness.

Thanks Gareth

Nice purchase! Had ordered that 5 piece screwdriver set but they sent the 6 piece. Should have them this week with any luck. Paid around 60 (they retail for almost $75+ tax in canada!) for the ratcheting wcrewdriver. A little disappointed that it was the Williams design handle but to get a plain Williams shipped to me it would cost almost the same so I figured what the heck.
Have to ask...how much are their wrenches? The prices on a lot of the other stuff is damn near what snap on charges off the truck so I didn't even think to ask when I was there. I got a bit of a discount due to my FIL's company being one of their commercial customers but nowhere near the discount that I would get if they were purchased through the company. Not an employee so can't do it.

 

[jeffmoss26]

Where do I find one of these CAT stores?

 

[Chubi_QC]

Where do I find one of these CAT stores?

Look for the yellow trucks

 

[JSBriggs]

Where do I find one of these CAT stores?

1.866.OHIOCAT

CLEVELAND, OH
Heavy Equipment Division

3993 E. Royalton Rd.
Broadview Hts, OH 44147

440.526.6200
800.837.6200
Fax: 440.526.9513

PARTS HOURS:
M-F 7:00 AM - 6:00 PM
SAT 7:00 AM - 11:00 AM

-Jeff

 

[osborn.ozzy]

I lived in Toledo up until 2 months ago and never seen or heard of CAT tools

 

[Hyster Gareth]

Canuck Ian,

The wrench set is $224.63 Canadian Dollars that is excluding tax. In the UK they are £195.11.

Most CAT tools are now made by Snap On or Snap On Industrial (JH Williams). They are due to bring out a new tool boxes shortly.

Thanks Gareth.

 

[jeffmoss26]

Thanks JSBriggs!!

 

[BJ42LX]

Craigslist: $15. It cleaned up nice and works great...

 

[tfreer85]

Here is my free haul thanks to my dad. Cart was my grandfathers (as are most of the tools) and the OTC toolbox was his. Both in need of restoration. Newer craftsman is mine that was stuck in a storage abyss.

 

[brianpgriset]

I snagged a full set of those Wiha striking cap microgrip screwdrivers mentioned over in the Hot Deals thread. These things are solid!

Man, I was the one who posted that and I still haven't recieved mine! They show up tomorrow though. They look great. I can't wait.

 

[CoryZ]

Man, I was the one who posted that and I still haven't recieved mine! They show up tomorrow though. They look great. I can't wait.

They shipped out of MN, so UPS ground got them here next day... Enjoy!

I picked up this Kennedy 520 today off CL. These things are solid!

This one is in pretty decent condition. The felts good, but it could use a good cleaning and maybe some touch up paint. Key is, of course, missing.
I didn't get a steal, but didn't overpay by too much either.

It's going to be home to precision layout and jewelry fabrication tools.

 

[dj00140]

New craftsman Box, I think it was $80 for top and bottom ($40 each) closeout deal.

Craftsman Deep set SAE and metric for $22 shipped and got the cheapo import hex and torx set

Craftsman screwdriver set, I should of got WIHA and probly still will but the price was right! with wiha should I get the chiseldriver or lasertip? Or the set thats on sale, the microfinish?

My $12 greenlee ratcheting wrench set I should of ordered more then the 5 I did along with my 3 pc craftsman 60 tooth set, flex head RP, and 2 cman pliers which were WAY nicer then expected! I ended up making money on the deal cause I bought a crapload of new cman stuff all in packaging! Returned most of it and sold the gift card kept what I wanted!

Dont worry I got more ratchets and sockets, I dont want the GJ guys to think im a loser! lol

And for any car audio guys, a 15" DC audio XL ready for rebuild, AKA a 60 lb. subwoofer, one of the best in the world! IMO dont worry the boxers are clean!

And my g/f was on my camera again! Anyone like cats LOL

These were all acrewed in the last few weeks except the cat unfortunately!

 

[MoToys]

Was looking around my snapon dealer's truck and found this 1/4" breaker. He was shocked he still had it so he took $15 off.

 

[wchamberlain]

S/O cordless screwdriver kit

Matco 6 pc flare nut from gj member dan1120, super fast shipping

Wouldn't be a good day without a ratcheting screwdriver for Jeff Moss

Couple of measuring tapes from Matco I got about 2 weeks ago

 

[RhodesSpeedShop]

Was looking around my snapon dealer's truck and found this 1/4" breaker. He was shocked he still had it so he took $15 off.

Damn you thats an awesome score!!!

 

[Moose-LandTran]

Was looking around my snapon dealer's truck and found this 1/4" breaker. He was shocked he still had it so he took $15 off.

I have one of those! They're pretty handy.

 

[canuckian]

Got a big box from member wchamberlain today... Snappy 236efset, pink and yellow ratcheting screwdrivers (there were actually 2 pink but one was for the missus), Matco 88tooth stubby flex, Matco door tool set, and he threw in a set of field shears, an Earnhardt die cast car for my wee guy and a set of snap on playing cards. As usual, Will was a great guy to deal with and the box showed up pretty quickly especially since it came all the way from Korea!

Oh and the blue ratcheting screwdriver came from EBay.

 

[MoToys]

Damn you thats an awesome score!!!

I have one of those! They're pretty handy.

Thanks, it'll go well with my 5/8, 1/4" drive sockets.

Got a big box from member wchamberlain today... Snappy 236efset, pink and yellow ratcheting screwdrivers (there were actually 2 pink but one was for the missus), Matco 88tooth stubby flex, Matco door tool set, and he threw in a set of field shears, an Earnhardt die cast car for my wee guy and a set of snap on playing cards. As usual, Will was a great guy to deal with and the box showed up pretty quickly especially since it came all the way from Korea!

Oh and the blue ratcheting screwdriver came from EBay.

Nice. That's over a grand in tools, easy. I bit the bullet and bought the 236efset off the truck when there was a promo. $250 off and I still paid over $400.

 

[jeffmoss26]

Dammit now I want blue, pink, and yellow ratcheting screwdrivers lol

 

[cundifc]

S/O cordless screwdriver kit

Matco 6 pc flare nut from gj member dan1120, super fast shipping

Wouldn't be a good day without a ratcheting screwdriver for Jeff Moss

Couple of measuring tapes from Matco I got about 2 weeks ago

Did selling the impact help fund the purchase of the new one

 

[canuckian]

Nice. That's over a grand in tools, easy. I bit the bullet and bought the 236efset off the truck when there was a promo. $250 off and I still paid over $400.

Thanks! That set is around 850 + tax here in the great white north....exactly why I didn't buy it off the truck! its pretty much new and unused. I can only see marks on the tips of 2 of the hex sockets but nothing is twisted or anything.

 

[metaldad]

Got a po to order some supplies, treated myself to a little present. they were out of stock of the set......... I'll get that another time.
Anyhoo......... Armstrong Ratcheting combos, full polish, 7/16, 1/2, 9/16

 

[ECP]

3/8" Impact shallow 6pt flank drive socket set.

Got the top of the cart filling up nicely... just needs impact extensions.

Also got this which I ordered a couple weeks ago.

3" Blue Point DA sander. Feels like a pretty solid little machine... I can already tell it'll come in handy. COO = Japan

 

[dodge610]

Bought a rolling work table from sears sale last night regular $99.00 got it for $73.00 picked up in store Ill show pics later we had a bad rainstorm here cannot upload pics at this time.

 

[Black89LX]

I almost forgot, the cornwell guy brought my Cyclone F1 blow gun in last week thursday... its in the november flyer for just under $19.. comparable to the Typhoon by Acme. This blow gun has quite the snort!

 

[wchamberlain]

Did selling the impact help fund the purchase of the new one

Cody,

No, set my sights on getting a pink, red and green one now, and of course to continue my drive for more ratcheting screwdrivers!!!!!!!!!

 

[binkcat16]

New craftsman Box, I think it was $80 for top and bottom ($40 each) closeout deal.

Craftsman Deep set SAE and metric for $22 shipped and got the cheapo import hex and torx set

Craftsman screwdriver set, I should of got WIHA and probly still will but the price was right! with wiha should I get the chiseldriver or lasertip? Or the set thats on sale, the microfinish?

My $12 greenlee ratcheting wrench set I should of ordered more then the 5 I did along with my 3 pc craftsman 60 tooth set, flex head RP, and 2 cman pliers which were WAY nicer then expected! I ended up making money on the deal cause I bought a crapload of new cman stuff all in packaging! Returned most of it and sold the gift card kept what I wanted!

Dont worry I got more ratchets and sockets, I dont want the GJ guys to think im a loser! lol

And for any car audio guys, a 15" DC audio XL ready for rebuild, AKA a 60 lb. subwoofer, one of the best in the world! IMO dont worry the boxers are clean!

And my g/f was on my camera again! Anyone like cats LOL

These were all acrewed in the last few weeks except the cat unfortunately!

i have a cat just like him looks like a maincoon

 

[BloodySinner]

Some of my new purchases CAT goodness.

Thanks Gareth

Nice set.

Something tells me Snap-On makes these. They look awfully similar.

 

[Adrien]

Very excited about this one! Been wanting an impact driver for awhile.

Adrien

 

[JASTECH]

My only new toys are a Keithley 2000, Fluke 45 and Wavetek 3010. Still looking for Oscilliscope, Maybe Tektronix 7000 series.

 

[oldwheelieguy]

I picked up the HF 56" Roll Cab today and the Craftsman 311 piece socket/ hex bit set along with the HF socket trays to organize them.