Show your new tool arrivals

[chumley360]

That's a nice set!

 

[dieselmike]

that camo flashlight is awesome

 

[jeffmoss26]

They still sell the hard handled picks? Or was it just New Old Stock on the truck?

 

[wchamberlain]

Jeff,

Apparently a new thing form Snappy, 8 piece set now

 

[pdizzleinmt]

Well 10 piece with the mirror and magnet. Part number is SDMINI10O. my snapon guy also had red and green

 

[jeffmoss26]

Time to find the snap-on man ASAP! How much was it?

 

[Altec]

Well 10 piece with the mirror and magnet. Part number is SDMINI10O. my snapon guy also had red and green

I'll have to write that down for Tuesday!

 

[Altec]

Couple things from Sear's.

10-11 Box End Wrench
12-14 Box End Wrench
5/16 Combo Wrench
Work gloves for $10.

 

[BHH]

Glad I didn't spend the $170 on the mini drivers last week on feebay

 

[jeffmoss26]

Naturally the part number doesn't work on the website

 

[canuckian]

Naturally the part number doesn't work on the website

It came up on the US site for red and orange, but not green for some reason or another. $114 and some change....

 

[BHH]

I just want the green mini drivers. If someone gets a set of these and wants to sell the mini drivers please PM me!

 

[eklipsis]

Not new but new to me. Picked them up at an auction for 12 bucks...

still working on cleaning them up

 

[JASTECH]

He are my newest arivals. The Red pick-up tool w/LED I don't have yet, they want 7.00 for it, what you think?

 

[JAKE-THE-TOOL-MAN]

Please help me understand why a flashlight is $100??

You would understand that its worth every penny once you use it. $100 is a great price, I picked mine up on the Cornwell truck for $130

 

[FlatBlackBlaze]

He are my newest arivals. The Red pick-up tool w/LED I don't have yet, they want 7.00 for it, what you think?

i bought one but it isnt very durable

 

[dodge610]

He are my newest arivals. The Red pick-up tool w/LED I don't have yet, they want 7.00 for it, what you think?

Jastech stupid question time where did your new arrivals come from. I like the tape measure holder and a few of the ratchets may have to do some buying. And I was doing so good at beating the sickness we all have to darn

 

[xurusaibobx]

i told my snap on guy ive always wanted a Green MG725 for the longest time so for the past 3 months hes been contacting a few dealers all over trying to locate one for me. today he shows up with a green MG325

not what i really wanted but he promised me the mg325 would be more then enough for my daily usage in the shop and he gave me a great deal if me and my coworker bought one i couldnt say no!

also bought some extra long screw drivers last week

 

[jeffmoss26]

I'll have to look again Canuckian!

 

[JMartel]

Just a pair of saws.

Coping saw is fully US made, Ripping saw is US assembled. Sadly, none of the craftsman saws were US made. All china, and all more than this one.

Oh, and some wood to use them on. Cherry, Walnut, Curly Maple, and Oak.

 

[Lippyp]

Just got a belated valentines day present from my wife (it got delayed in transit)


Its a british made Sealey copper/hide hammer, one side of the head is pure copper, the other coiled rawhide, mines a No 2, nicely made tool, need to find some stuff to pound on now!

 

[superautobacs]

Lippyp,

I wish i could get my hands on one of those here. BTW, that's made by Thor

 

[JASTECH]

Dodge610, The tape measure or anything that clips can use this. I found it at Wal-Fart in the clearance section. They had 2, so I bought both of them. The magnets are large rare earth mags.

Pick-up tool with LED light, Ok, thanks. If they are that bad I won't bother. It's a Wal-Fart item too.

The wrenches are Napa, Williams and Wright.

 

[canuckian]

I'll have to look again Canuckian!

Orange
http://buy1.snapon.com/catalog/searchLN.asp?partno=SDMINI10O&searchTrnsfr=true&search_type=Part&store=snapon-store

Red
http://buy1.snapon.com/catalog/searchLN.asp?partno=Sdmini10r&searchTrnsfr=true&search_type=Part&store=snapon-store

 

[twofifty]

I still need to get some pictures of the other stuff i've picked up this week, but these i got today.

Channel lock set, Regular $39.99, on sale today for $9.00!!! Couldn't really walk away from that one.
Flare nut wrench set 6pc, it is SAE and Metric. Regular $25, on sale today for $15
I also bought a die grinder the other day but it didn't come with the mandrel to install a cut off wheel on it, so i picked up a mandrel and cutting disc kit, pretty cheap about $6
And my friend gave me an angled die grinder today, again no mandrel so i picked up the roloc disc kit with mounting mandrel.
Last are just a few grinding stones but i think the shaft size is to small for my grinder.

I also bought in the past week or so,
Fuel line disconnects,
Small wire brush set (3pc, steel, nylon and brass)
Seal puller,
Extensions,
Battery terminal/post cleaner.

 

[ihateminimumwage]

I put this picture in my intro thread, but still pretty damn happy with my new Snap-On stuff

Also recently bought a Star Products TU-15-53 Diesel Compression Tester Set (http://www.tooldiscounter.com/ItemDisplay.cfm?lookup=STATU-15-53) which is the EXACT set that Matco re-badges and doubles the price on (http://www.matcotools.com/catalog/product/DCT1553/AMERICAN-DIESEL-COMPRESSION-KT/).

 

[jeffmoss26]

Thanks Canuckian! Gonna save up for a set!

 

[dodge610]

Dodge610, The tape measure or anything that clips can use this. I found it at Wal-Fart in the clearance section. They had 2, so I bought both of them. The magnets are large rare earth mags.

Pick-up tool with LED light, Ok, thanks. If they are that bad I won't bother. It's a Wal-Fart item too.

The wrenches are Napa, Williams and Wright.

Thanks Jastech I will be going to my walmart tomorrow to check it out.

 

[jflores]

I've been collecting for about a year now, since joining the site. Here's kind of a compilation of what I've got so far. PB Swiss ratcheting driver and box of bits, PB Insider for around the house. AP_Mech's "the hammer". My first two Estwing hammers (16oz and 3lb drilling), 14" Ridgid aluminum pipe wrench, 1/4" Wright sockets with ratchet and 18" Snap On breaker bar (1/2" drive), Wright 3/8" metric/imperial with ratchets, Williams USA 1/2 drive sockets. NWS pliers.

 

[jflores]

Continued..

Knipex Pliers wrench, Channelock Nutbuster/adjustable, Wera Chiseldrivers, Bondhus hex keys, PB Swiss long screwdrivers, Wright 1/2 ratchet, Bosch 18v lithium drill/impact set, Bonney double boxed wrenches, Williams USA stubby, Wright double boxed ratcheting.

 

[jflores]

Last post...

Wright Grip wrenches up to 1-1/4", Wright screwdrivers (also have the slotted kit), PB Swiss Jeweler's kit, Bonny metric wrenches (up to 19mm) Norsman bits, PB Swiss pry bar, Tove Wrecking Bars (11/25/36 inches), and Knipex Raptor pliers. The Tove and Knipex Raptor just arrived yesterday.

 

[JayL]

Bosch 18V Drill Driver

 

[zbadass28]

I put this picture in my intro thread, but still pretty damn happy with my new Snap-On stuff

Also recently bought a Star Products TU-15-53 Diesel Compression Tester Set (http://www.tooldiscounter.com/ItemDisplay.cfm?lookup=STATU-15-53) which is the EXACT set that Matco re-badges and doubles the price on (http://www.matcotools.com/catalog/product/DCT1553/AMERICAN-DIESEL-COMPRESSION-KT/).

very nice.. Snap On is the best IMO. By the way I love the Squidbillies tattoo that is BAD ***!!!!!!!!!!!!! If it's not your tattoo it should be!!!

 

[zbadass28]

Got this today 1/4 inch ratchet with 3/8th drive internals

View media item 16863View media item 16864

 

[TonyCH]

Got this today 1/4 inch ratchet with 3/8th drive internals

Wow, more info please! is this Dual 80?

Can it be bought somewhere or did somebody make it? Do you know what parts are needed to put it together?

I have too many T72's, I would love to convert one.

 

[zbadass28]

Wow, more info please! is this Dual 80?

Can it be bought somewhere or did somebody make it? Do you know what parts are needed to put it together?

I have too many T72's, I would love to convert one.

I bought it brand new off the truck today It is dual 80, and the part number is FC72 PRICE $69.00

 

[TonyCH]

I bought it brand new off the truck today It is dual 80, and the part number is FC72 PRICE $69.00

Thanks, not so cheap as converting mine but oh well. Thanks for that, you just cost me $100 or whatever they cost here.

 

[zbadass28]

thanks, not so cheap as converting mine but oh well. Thanks for that, you just cost me $100 or whatever they cost here.

why not just get te rebuild kit for the one i have and transfer it into one of your old ones???

 

[TonyCH]

why not just get te rebuild kit for the one i have and transfer it into one of your old ones???

Hmmm... if the T72 and FC72 bodies are the same then it should work. Great idea, I'll ask my SO dealer if he can get me a kit and I'll try.

 

[Scuderia-F1]

Got this today 1/4 inch ratchet with 3/8th drive internals

Those are nice to have!