Sincitymetalworks
Well-known member
Snap on got me again today 2 weeks in a row!
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
CommonRail
Well-known member
- Joined
- Aug 22, 2009
- Messages
- 126
I have two large Snap-on jackets, both new. One in the plastic still, one I tried on. (too big for me) Make me an offer if anyone is interested.
DARKSCOPE001
Well-known member
Got a new set of wrenches today. and I decided to upload some pics that i had been saving when I had to re-arrange my computer and lost my camera cable.
I have been wanting a set of stubby wrenches for a while and was at lowes today and stopped by the tool section (knowing that all kobalt tools are Taiwan/ China) And saw a set of stubby wrenches. Sae set was 22 metric set was half off at 11. Was going to get the Snap-On set but got these instead. (shame on me i know)
I have been wanting a set of stubby wrenches for a while and was at lowes today and stopped by the tool section (knowing that all kobalt tools are Taiwan/ China) And saw a set of stubby wrenches. Sae set was 22 metric set was half off at 11. Was going to get the Snap-On set but got these instead. (shame on me i know)
Attachments
jrodc455
Well-known member
Got a new Nebo CSI Edge 50 Lumen Flashlight.
toolmaker1
Well-known member
You will love that channelock oil filter wrench, it is my go-to for about 95% of all filters. I think those wrenches look good. Stubbies are one place it does not pay to go crazy expensive. If you can put enough torque on a stubby to break it you are a better man than I.
Found some old underlined logo SO XM and XSM wrenches and couple of SO-sockets from the '80s. Anybody have any idea when these wrenches were made, I cannot find a date stamping? The large XMs have round profile handles.
volunteers
Well-known member
Just bought a Matco spin handle
DARKSCOPE001
Well-known member
You will love that channelock oil filter wrench, it is my go-to for about 95% of all filters. I think those wrenches look good. Stubbies are one place it does not pay to go crazy expensive. If you can put enough torque on a stubby to break it you are a better man than I.
Thanks, I sure hope that the filter wrench comes inhandy. I have a big craftsman one that is similar but its to big and bulky for little car filters that i work on. I saw that, and got a HD gift card for
and got both the filter wrench and the little side cutters. The cutters are my go to cutters at work.
supra90turbo
Well-known member
Ummmm, where? I want one.
This is canadian:
http://www.princessauto.com/pal/pro...-in.-dr-x-40-in.-Jumbo-Mechanics'-Breaker-Bar
US:
http://www.northerntool.com/shop/tools/product_200328359_200328359
Free shipping up to $49. I dont know if this applies to US addresses as well. Give em a call and see.
Last edited:
supra90turbo
Well-known member
Ah damn, I'll try them and see. Thanks for the info!
contactme_11
Well-known member
- Joined
- Dec 27, 2010
- Messages
- 106
Do they look like the one posted on the last page?
A
audiocrazy25
Guest
FancyLearnin
Well-known member
Looks like it works for U.S. addresses also. Just checked out, shipped to Minnesota, no ineligibility errors. Pretty sweet deal for $21 shipped! Probably don't need it, but for $21, how can you pass it up!?
AdamLym
Well-known member
Nice find ... does it have a ball socket retainer?
jtfc
Well-known member
I picked these up a few weeks ago for stubbies you can't beat the price if I break them then ill spring for the snap on stubbies
JASTECH
Well-known member
Snap on got me again today 2 weeks in a row!
I've been wanting a male/female pipe plug socket set forever!
Nice buys! ;-)
thaghost87
Well-known member
My new additions... Just getting time to post pics of them
Picked up a used Mac cut off tool #Free!! My 1/2" Nitro AirCat 1200k (tooltopia.com) $185ish. Snap On fAR205 3/8" and my mini 3/8" HF
Snap on Impact screwdriver & HF pulley puller set.
Snap On long 3/8" ratchet FHLF80
Lisle Oil filter socket set
Mayhew universal tie rod tool
Matco 26pc 1/2" shallow impact ($81) Ernst rail
Picked up a used Mac cut off tool #Free!! My 1/2" Nitro AirCat 1200k (tooltopia.com) $185ish. Snap On fAR205 3/8" and my mini 3/8" HF
Snap on Impact screwdriver & HF pulley puller set.
Snap On long 3/8" ratchet FHLF80
Lisle Oil filter socket set
Mayhew universal tie rod tool
Matco 26pc 1/2" shallow impact ($81) Ernst rail
GSMotorrad
Well-known member
- Joined
- Mar 8, 2012
- Messages
- 420
Not sure if you guys will appreciate these, but I sure as heck do! These things are freaking glorious! My new "Y" metric hex wrenches - CNC machined two-piece hardened steel center pieces, with replaceable bits. They even came with 6 extra bits!
These things are heavy, and feel so good in the hand. I've got the Torx version on the way too! I stole the vinyl prophylactics from my old ones. The second picture shows the old tools these are replacing:
These things are heavy, and feel so good in the hand. I've got the Torx version on the way too! I stole the vinyl prophylactics from my old ones. The second picture shows the old tools these are replacing:
Finally tracked down a my local snap-on truck. This was my first time in a truck and my intentions were to just get some green comfort grip handles to swap out my red ones and I end up spending almost $300.
4pc mini screwdriver set - green had to order
4pc mini torx driver set - green had to order
8pc instinct screwdriver set - green had to order
THLF72 - instock
4pc mini screwdriver set - green had to order
4pc mini torx driver set - green had to order
8pc instinct screwdriver set - green had to order
THLF72 - instock
canuckian
Well-known member
Goth these in the mail from GJ member jasoninwisconsin. The "orange drawer" is almost complete lol
Sincitymetalworks
Well-known member
Complete impulse buy I seen theses on the hot deal tread and bought them.
Got one on order from Northern; even with shipping it was less expensive than I was expecting to pay elsewhere. I wanted to make sure it had a ball retainer. Also ordered a Sunex 4305 3/4" to 1/2" adapter from Amazon so I can use my 1/2" impact sockets with it. Thanks for the tip.
BevoZ06
Well-known member
Complete impulse buy I seen theses on the hot deal tread and bought them.
I did the same thing. Mine arrived two days ago. A great bargain for the price.
Goth these in the mail from GJ member jasoninwisconsin. The "orange drawer" is almost complete lol
That's a nice set
Sent from my ADR6400L using Tapatalk
jrodc455
Well-known member
99TJSahara
Member
FHL80
PWCS7
Craftsman snap ring pliars 47386
Also a SO 1/4'' stubby 72 tooth
Last edited:
jeffmoss26
Well-known member
replacement knives (warranty) finally showed up from leatherman...little black plastic tray is for pinning locks, a buddy on keypicking made them up and sent me one to try out...crimpers and crescent wrench from oldtoolman...huot drill bit case from CRTDI.
supra90turbo
Well-known member
I would like one of those cylinder coding trays, that would be handy!