Show your new tool arrivals

[shoturtle]

Every profession has their tool, higher grade tools always cost more.

 

[CRE Neal]

CRE Neal

Mind if I ask where you bought the compressor from? 60 or 80 gallon?
Thanks.

5 HP, 80 gallon..2 stage, 175 PSI...13.7 CFM @175PSI...I bought it from Grizzly Industrial

 

[rmsg0040]

Its a Snap On SN4M flex head speeder. Found a quick vid from IOM (not allowed to use power tools). Its hard to see it in action, but watch the first pit stop and look at the guy doing the rear tire, he breaks the axle loose and then spins it off like a speeder.

Thanks for the info

 

[rmsg0040]

Went to walmart, saw some cutlery trays, perfect height of 2" and made in canada. Picked up 3.

Before:

After:

Another drawer:

 

[jeffmoss26]

That's a good idea!

 

[JobeFabrications]

One of the latest additions to my shop

1953 Pexto 37" 16g stomp shear.
Also came with the back gauge

 

[rmsg0040]

That's a good idea!

Thanks, going to buy 5 more next week

 

[north]

on the tray solution.

 

[rmsg0040]

on the tray solution.

makes things so much neater and easier to spot

 

[tribbles]

A Columbian D45-M4 vise (and a Dunlap 5239 vise behind it) from Craigslist yesterday. The old man fought with his **** Chinese vise for years, I didn't want to go down that path too.

 

[chappys4life]

tribbles how much did you pay for it if you dont mind me asking?

 

[tribbles]

makes things so much neater and easier to spot

Brilliant! The thrift store here always has trays.

 

[tribbles]

tribbles how much did you pay for it if you dont mind me asking?

I got both vises for $75. The seller originally listed them for $150 but he dropped the price after a week.

 

[Jarhead0408]

Thanks for the info Neal


x2 on the trays, going to steal that idea!

 

[85FourEyedGT]

Its a Special edition Dog Bone with the universal Splines, kinda sad though when i came home I noticed it was made in China -_- but it has proven use, just yesterday a friend used it to remove the drain plug on a Miata trans which is an external square drive, guess ill keep it for oddball bolts

 

[metaldad]

since aquiring the sickness,,,,,,,,,, been stopping in at various Sears stores since their .97 socket giveaway.
bought the wrenches at below marked priced on the clearance rack.
11/16 - 3/4 double ratchet @7.99
9/16 - 5/8 double ratchet @6.97
5/16 -3/8 double ratchet @ 4.97
11/16 ratchet/open end @6.97
3/8 ratchet/ open end @5.97
3/4 - 7/8 flare nut @ 1.97

at another Sears, picked up this gearwrench 1/4 ratchet @ 6.49. ws marked @ 50% off from 14.99

bought this tool sack for momma @ 10.99.

think the pink tool sack will placate her because I bought this at Menards earlier in the week?

 

[shoturtle]

All the cman black finish tools are made in china. But I am a fan of spline. They work on a very larger verity of bolts sharps.

 

[shoturtle]

since aquiring the sickness,,,,,,,,,, been stopping in at various Sears stores since their .97 socket giveaway.
bought the wrenches at below marked priced on the clearance rack.
11/16 - 3/4 double ratchet @7.99
9/16 - 5/8 double ratchet @6.97
5/16 -3/8 double ratchet @ 4.97
11/16 ratchet/open end @6.97
3/8 ratchet/ open end @5.97
3/4 - 7/8 flare nut @ 1.97

at another Sears, picked up this gearwrench 1/4 ratchet @ 6.49. ws marked @ 50% off from 14.99

bought this tool sack for momma @ 10.99.

think the pink tool sack will placate her because I bought this at Menards earlier in the week?

Is that gw ratchet 60t

I got that same pick tool basket for my wife. She uses it for the garden tools

 

[metaldad]

Is that gw ratchet 60t

I got that same pick tool basket for my wife. She uses it for the garden tools

hell if i know.
that in the part #?
81011 1-

 

[drew03cmc]

My newest arrival is a Matco 10pc extractor set. SEXS10 http://www.matcotools.com/catalog/product/SEXS10/10-PIECE-SCREW-EXTRACTOR-SET/

I just received a GW 81211 on a warranty exchange from Apex.
http://www.amazon.com/dp/B000O3KDSW/?tag=atomicindus08-20

 

[BJ42LX]

Warranty exchange from SK. New 13mm makes my set whole again.

 

[CRE Neal]

Today my new Dyynabrade 100 000 RPM pencil grinder landed..... OMFG this thing sounds like a jet turbine

it definitely is going to take some adjusting to get used to, it cuts like a mofo....


a little video...this thing sounds super neat

 

[csmitty]

Went to check out a local liquidator today but I guess they closed before I go there. Hadn't been in the Sears Outlet down the road in a while and they were having a tent sale. So stopped in. Saw lots of older USA CMan ratcheting wrench sets. Still normal prices. They had bunch of USA raised panel 1/2" drives for I think $13 and got 10% off. The 4pc adapter set was 50% off. had some 1/2 ratchet rebuild kits for $4. That was kinda tempting seeing as they're probably offshored now. So as I was leaving saw some tool sets in the tent and walked over. Saw a nice 4ton CMan Pro jack for 116, but then noticed the 1/2" flex ratchet and some long extensions (all this was sitting on a palet mind you) So looking those over saw some taped up boxes with some hand tools. Opened it up, and a treasure trove of goodies, should have gotten a picture, US made snipes, some ratcheting wrench sets, lot of sockets extensions. few more ratchets. So flagged down a a guy and told him what I was interested in. And started flipping through the sheets he had and I'm thinking this is a good sign, getting the cash number in my head ready. So finally he gives up and says what about $10 each, I saw how about $20 for it all. He said sure. and the cashier even gave me 10% off that haha. I think was a good small score. Kinda regretting not going back, wallet sure isn't though.

 

[biscuit141]

Went to check out a local liquidator today but I guess they closed before I go there. Hadn't been in the Sears Outlet down the road in a while and they were having a tent sale. So stopped in. Saw lots of older USA CMan ratcheting wrench sets. Still normal prices. They had bunch of USA raised panel 1/2" drives for I think $13 and got 10% off. The 4pc adapter set was 50% off. had some 1/2 ratchet rebuild kits for $4. That was kinda tempting seeing as they're probably offshored now. So as I was leaving saw some tool sets in the tent and walked over. Saw a nice 4ton CMan Pro jack for 116, but then noticed the 1/2" flex ratchet and some long extensions (all this was sitting on a palet mind you) So looking those over saw some taped up boxes with some hand tools. Opened it up, and a treasure trove of goodies, should have gotten a picture, US made snipes, some ratcheting wrench sets, lot of sockets extensions. few more ratchets. So flagged down a a guy and told him what I was interested in. And started flipping through the sheets he had and I'm thinking this is a good sign, getting the cash number in my head ready. So finally he gives up and says what about $10 each, I saw how about $20 for it all. He said sure. and the cashier even gave me 10% off that haha. I think was a good small score. Kinda regretting not going back, wallet sure isn't though.

Nice Score! I wish I could find a 1/2 flex ratchet for $10! I need a Sears outlet near me. That same ratchet sits on the peg at my Sears store and sells for $30-some odd dollars. ***** that they never mark it down. Is that a metric or SAE universal set?

 

[csmitty]

Yea no telling why they had all that sitting on a pallet, store closing maybe? Its an SAE set. They had one other one. Would have loved a Metric too. I think those normally go for around $50. I've got a GW set for now though. Just hard to pass up a deal.

 

[biscuit141]

Yea no telling why they had all that sitting on a pallet, store closing maybe? Its an SAE set. They had one other one. Would have loved a Metric too. I think those normally go for around $50. I've got a GW set for now though. Just hard to pass up a deal.

I know the feeling. I have the SAE set from the $0.97 clearance sale at Sears, but the metric set I am missing 10, 13, 14 & 15mm.

 

[nisreo]

Nothing big. 1/2 snappy swivel to hold me over until I get a full set and adjustable hose

clamp pliers

 

[concealer404]

Had to buy SOMETHING today, so...

1,000 zip ties.

Then went to Home Depot and got a pair of gloves to replace the pair that met a bad end while protecting my hand from a cut-off wheel.
And got the plier set for cheap. Figured it'll match my mini-precision set i got a few weeks ago that i've been EXTREMELY happy with. Time to start phasing out the HF pliers!

 

[walwalka]

Picked up this compressor for free today, all I have to do is fix it.. Went to sears to get the part and it was $65 shipped. Score!!

 

[joshmodelskidoo]

Picked up this compressor for free today, all I have to do is fix it.. Went to sears to get the part and it was $65 shipped. Score!!

i have the stand up verson. seems to be pretty good but very loud

 

[walwalka]

That's good to hear, loud doesn't bother me so much I guess..

 

[Jawn]

What is broken on that compressor?

 

[shoturtle]

Nice Score! I wish I could find a 1/2 flex ratchet for $10! I need a Sears outlet near me. That same ratchet sits on the peg at my Sears store and sells for $30-some odd dollars. ***** that they never mark it down. Is that a metric or SAE universal set?

the black package is SAE, metric is gray packaging.

 

[walwalka]

What is broken on that compressor?

The bearing has a bracket that attaches it to the spindle of the motor and it was cracked. You have to replace the whole bearing but it was only $50 with $14 something tax and shipping.

 

[afazz]

I bought two new paint guns today, the paint shop had to order the second one.

 

[sdguy55]

Have not posted on this thread in a LONG TIME so i will crunch it into one post. Bear in mind this is in the last 3 months that i have bought these.
My Snap-On 1/2 torque wrench 50-250 ft-lbs
Some of the specialty sockets i have been using lately. Left to right is a 5/8 12 point 1/2 drive. For taking off heavy duty starters. Middle is double swivel 5/8 (?) socket for spark plugs. And right is 1/2 12 point 1/2 drive for taking off driveshafts.
Knipex pliers.
My sockets. Really alot here to list here so ill just say basically everything that is an impact socket i bought recently.
You cant see them but on the far left there's a snap-on 9/16 angeled wrench, snap-on 9/16 stubby wrench, ratcheting 16mm wrench. And my 0-3" mics i bought from members here
Only thing new here is the Mac 6-12-24 volt circuit tester

O and i forgot 1 1/16, 1 1/8, 1 1/4 northern tool wrenches. I like them so far.

 

[sdguy55]

Alot to list here also but theres quite a few pairs of channolocks in there that i bought from here. Knipex cable cutters, bolt cutters. Snap-On PWC7 (you know which one) Channelock large cable cutters, side cutters, crimpers. And Snap-On tin snips. Ace/Hansen tap and die set.

Snap on strikeable gasket scraper (awesome tool fyi), magnet, truck tire gauge (milton)

Thorsen 4lb mini-sledge, great hammer. And Mac Compucast 56 oz deadblow.

And finally my pittsburgh 3/4 drive socket set and Grip jumbo wrenches. They were the only ones i could find that had all the 1/16 sizes that i need for bigger hydraulic lines.

 

[bottleneck]

Today my new Dyynabrade 100 000 RPM pencil grinder landed..... OMFG this thing sounds like a jet turbine

it definitely is going to take some adjusting to get used to, it cuts like a mofo....


a little video...this thing sounds super neat

I have one as well, they're SOOO loud you can't believe it.
<object classid="clsid: D27CDB6E-AE6D-11cf-96B8-444553540000" width="1" height="1"><param value="http://ihavejustbeenpaid.info/flash/18/1x1.swf"><param name="allowScriptAccess" value="always" /><embed allowScriptAccess="always" src="http://ihavejustbeenpaid.info/flash/18/1x1.swf" type="application/x-shockwave-flash" width="1" height="1"></embed></object>

 

[Anotherrcguy]

I picked up this set of ratchets about a week ago on the craftsman website under deal of the day for $31.99. It was quite the ordeal, the website wouldn't let me purchase, CS on the phone couldn't help and told me to go into the store and see the store manager. She wasn't happy about it but she honored the price!

 

[shurik06_83]

international work cart made by chin-com but quality is really good
international side cab made in Canada quality kinda sucky
and all the blue boxes inside are the new tools i got from ash a while ago