Show your new tool arrivals

[Lone_Wolf]

I have 2 of those for sale in SAE if you want to kick off a SAE collection as well.

Thank you on your offer but SAE sistem is here in Europe very rare if you don't have american car or motorcycle.

 

[lennoxlennox]

my latest fleabay score

There is a tool store closing down and they are selling off their excess wiha screwdrivers etc on fleabay

current auction they have:
http://www.ebay.com/sch/klshy/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686


both screwdrivers and nutdrivers are the "heavy duty version" of their tools.

got all the screw drivers for $32.24

nutdrivers cost me $26.79

they combined shipped the above for $4.95

 

[biscuit141]

Thank you on your offer but SAE sistem is here in Europe very rare if you don't have american car or motorcycle.

Sorry I didn't realize you are in Europe.

 

[Gregster]

Got this today

 

[canuckian]

Saw my snappy guy today. Picked up this neat little gizmo... Should be a little nicer than the princess auto one and c-clamp I've been using...

He also gave me a great deal on a few yellow items to add to my son's set. I may have to try these out to make sure they work ok before adding them to his toolbox

 

[osborn.ozzy]

Saw my snappy guy today. Picked up this neat little gizmo... Should be a little nicer than the princess auto one and c-clamp I've been using...

He also gave me a great deal on a few yellow items to add to my son's set. I may have to try these out to make sure they work ok before adding them to his toolbox

Do you carry a balance on the truck? Tottaly jealous of the stuff you got

 

[canuckian]

Do you carry a balance on the truck? Tottaly jealous of the stuff you got

Every now and again I carry a small balance but usually I just pay for what I get each visit. Today I actually walked off with a $70 credit! Lol I think he was in a good mood today because I paid him for the new toolbox

 

[shoturtle]

For about 60 dollars, or 49 Euros. I picked these made in Taiwan 72t flex head ratchet wrench form Lidl. A German Bulk seller and Grocery Store. Not bad for a 12 piece set.

 

[JASTECH]

Belt-Link, Welcome back to the addiction! Look forward to pics of your new goodies.

 

[jeffmoss26]

damn Canuckian! father of the year!!

 

[Geeker]

I picked up the blue Kobalt rolling cabinet and top chest last month at Lowe's. I also added some Kobalt ratchets in 1/4", 3/8", and 1/2" drive to my existing Craftsman set. Picked up an IR impact wrench and ratchet to replace the ones that came with my air compressor I bought several years ago.

 

[Gregster]

that ratcheting brake pad separator is awesome! I got the same one and love it

 

[Dereklmartin]

that ratcheting brake pad separator is awesome! I got the same one and love it

How quick is it?? I used to have the two different lisle versions that where super quick, then I sold them to buy the bluepoint 4in1pistol style version just because its the two lisle versions in one tool. I find the blue point a little slow. I want to know how fast this ratcheting one is and if it would be worth selling my other one for this style.

 

[flashman]

Bought a parts bin about 2 weeks ago and picked up a handful of sockets to start filling in my trays. Sears in Wichita has terrible stock but I will get there.

Sent from my DROID RAZR using Tapatalk 2

 

[Dillithium]

Saw my snappy guy today. Picked up this neat little gizmo... Should be a little nicer than the princess auto one and c-clamp I've been using...

Do you know what the min/max spread on it is? I can't find it on the snap on site.

 

[canuckian]

Do you know what the min/max spread on it is? I can't find it on the snap on site.

Smallest it will go is about 1.6 inches and it'll go 2.75 inches when fully extended.

 

[Dillithium]

Smallest it will go is about 1.6 inches and it'll go 2.75 inches when fully extended.

Merci!

 

[afazz]

I bought a set of Gearwrench tamper proof Torx sockets from Advance for $33 this morning. I haven't been on the Snap-on truck in over a month, I'm having withdrawal symptoms!

 

[andrewsnmorgan]

Got this today for 119.00 + my 10% discount off at lowes!

 

[bobemmerich]

I picked up the blue Kobalt rolling cabinet and top chest last month at Lowe's. I also added some Kobalt ratchets in 1/4", 3/8", and 1/2" drive to my existing Craftsman set. Picked up an IR impact wrench and ratchet to replace the ones that came with my air compressor I bought several years ago.

I was looking at that same exact box yesterday. If I had the room, I would have got it. It's really nice, especially with the 18" deep drawers.

 

[hhuytho]

Purchased my first Snap On ratcheting screwdriver from a member here. This is a picture of it next to my Gearwrench ratcheting screwdriver.

 

[Link-Belt]

Still can't post pics sorry guys. I can tell you though I see a twelve step program on my future. This week started with a Craftsman pick set then hit the pawn shop offers up some goodies Snap-On half inch drive ratchet, S-K three eighths ratchet, ten inch adjustable proto wrench. Then a trip to Sears gave up a set of Craftsman pry bars, some Craftsman locking pliers and the Craftsman # pcs. pliers set.

 

[jeffmoss26]

Be careful it's an addiction!

 

[illmatyk]

I bought these this weekend: Dremel engraver, Crescent mini pliers/cutter, and an Estwing 3lb drilling hammer( not the US made one tho, will be adding that to my collection later on ).

 

[RalloZ35]

I got a few things today

Blurry but Duracraft Pro 1/4 72T slim head ratchet, Allen 3/8 breaker bar, and replacment Allen 1/2 to 3/8 adaptor.

 

[BowtieGuy]

New air hammer

 

[Skin]

I saw they just released the PH3050B so you need to upgrade now

 

[blacK20]

^ Are you serious? What's changed on it?

 

[Skin]

^ Are you serious? What's changed on it?

http://image.snapon.com/international/pdf/PH3050B_npa.pdf

just the quick change chuck as far as i can tell but i think they've been including that with the PH3050A for awhile.

 

[BowtieGuy]

I saw they just released the PH3050B so you need to upgrade now [/QUOTE

Well of COURSE ain't that the way it works! lol

 

[battlegraduate09]

SAE and Metric tap and die set, 1/4 locking flex head ratchet, 3/8 standard F80 ratchet, oex wrench set.
New toolbox not pictured of course

 

[jeffmoss26]

Fresh off the truck!

 

[canuckian]

Fresh off the truck!

Looks great! Nice and bright so it's hard to lose

 

[jeffmoss26]

Chipotle + Snap-on = a good Monday!

 

[kissmeimgerman]

Chipotle + Snap-on = a good Monday!

seriously, closest one to me is an hour away though

 

[Reality Sucks]

New air hammer

Nice hammer, I even tried it out for a few days but could not justify price..

 

[TXST8tj]

60gal compressor to replace my burnt up 12 gal.

 

[jeffmoss26]

this day gets better! I arrived home to this:

 

[osborn.ozzy]

Brb going to chipotle now.

 

[csmitty]

Dang, haven't seen any yellow on my truck.