Show your new tool arrivals

[canuckian]

Does snap-on make two different non-marring pry tool sets?

One set are pry tools (I call em panel poppers) and the others are scrapers. I suppose one could use the scrapers as pry tools as well

 

[concealer404]

Got these from the local old hardware store that was referenced in one of the new threads.

 

[Mavawreck]

HEI Spark Tester

S&G Inline Spark Checker

Durablock Set

 

[Ken81590]

^^^ I love the spark tester, I always use the orange ***** hose for hot sparkplugs in deep wells, pop that ***** on and pull her out, and for installing new plugs in deep wells, pop the plug into the end of the long orang *****, then slide it down the sparkplug well and screw it in hand tight with that. Saves you from stripping out a lot of sparkplug threads in cylinder heads. Good purchase

 

[osborn.ozzy]

Finally found a nice dirty old pawn shop, instead of the ones that try to look like walmart.

The williams superwrench is a 15/16 - 7/8 fwiw

 

[Chadwilliam1]

Not the Made in USA ones I wanted but price was right.

 

[shoturtle]

craftsman Max Axcess set.

 

[Skin]

Giant bag of assorted swab sizes



Ullman lighted inspection mirror



Matco superwtf wrenches. Someone made a thread about these awhile ago and people mostly joked about them (including myself) but it dawned on me the other day what a great tool these would be for holding tensioners in tight locations. On some makes the bolt is recessed so you really need a socket on a long ratchet or a special tool but with these you can make them a deep box wrench. Incredibly long things, placed a 15mm Matco flex/fixed above and a Snap-On high performance ratcheting.

 

[nanofrog]

Not the Made in USA ones I wanted but price was right.

Those look nice. But what ratchets are those?

 

[Skin]

Those look nice. But what ratchets are those?

craftsman thin profile

 

[nanofrog]

craftsman thin profile

Thanks.

 

[JerseyBoatBuilder]

Last of the Bday presents from my girl friend..
Already have 2 stubbies but I was complaining about not having a hex bit holder and I guess this was her answer LOL

 

[Skin]

Some sort of special b-day? Thats some serious cash she spent on you. Now you've got the bar set high for her birthday.

 

[JerseyBoatBuilder]

Some sort of special b-day? Thats some serious cash she spent on you. Now you've got the bar set high for her birthday.

No special than any other day maybe buttering me up and setting the bar high for an engagement ring..

 

[illmatyk]

Matco superwtf wrenches. Someone made a thread about these awhile ago and people mostly joked about them (including myself) but it dawned on me the other day what a great tool these would be for holding tensioners in tight locations. On some makes the bolt is recessed so you really need a socket on a long ratchet or a special tool but with these you can make them a deep box wrench. Incredibly long things, placed a 15mm Matco flex/fixed above and a Snap-On high performance ratcheting.

I don't own a set of those but my coworker has the SK version of those and they come in real handy!

 

[Dereklmartin]

New grey pneumatic 1/2" e-torx set and metric swivel set. A strut alignment level and mechanics tool savers socket tray. Mechanic too supply forgot to send me my vim magnetic tray though.

 

[otis66]

Thought I'd give Gearwrench a try. I got this today.

 

[Chadwilliam1]

those matco ratchet wrenches are awesome.

 

[jvitez]

No special than any other day maybe buttering me up and setting the bar high for an engagement ring..

She buys you tools, Snap On tools, and you're NOT ready to marry her? Think man, think!

 

[Skin]

I don't own a set of those but my coworker has the SK version of those and they come in real handy!

SK never had those, look closer they're double jointed. The SK G-Pro were a double sided ratcheting box with a single flex joint.

 

[mtnkrake]

A little kit for the truck.

 

[jeffmoss26]

Where did you get the roll? I like that.

 

[mtnkrake]

amazon

tool roll

 

[irisservice]

What is it called and where did you get it?

 

[Skin]

Matco Double Flex Joint Box Wrench Set SRDFXLM52T

https://www.matcotools.com/catalog/product/SRDFXLM52T/5-PIECE-DOUBLE-FLEX-JOINT-BOX-WRENCH-SET/

The price is hard to swallow for the weekend wrencher but they go on sale for $380. When you get down to it you can spend that much on 3 ratchets so...Plus they're spline drive which i really like. Damn things get stuck on bolts they fit so snug.

 

[Hoss356]

Picked up some new stuff this last week, I'm really stoked to have found deals on the torque wrench($20), the level($5) and the snap on driver($25). The rest of the tools are all US made too, except the damn Canadian tape measure... I was in a hurry and didn't stop to look long enough to realize it's metric! Oh well, I'm sure it'll come in handy for something...

 

[Trucky]

just some Enderes for today.

 

[jeffmoss26]

Where did you get that Craftsman bit driver? Almost looks custom made!

 

[powertrip]

My guess would be sears!

 

[sdguy55]

I think i might have to buy some of the regular wrench rolls made by them and put all my wrenches in them! Free up alot more room in the wrench drawer till i get a bigger box

 

[jeffmoss26]

Never seen that before, I have something similar that is a custom made Snap-on driver.

 

[Hoss356]

You're talking about the little one right? I've seen one on this site before but never come across one myself until yesterday. I picked it up with the red cased bit set at a garage sale because every bit that was with it is stamped USA and I've been having a ***** of a time trying to find non-Chinese bits in the stores lately.

 

[jeffmoss26]

Yep. Must have been something they sold a long time ago.

 

[Gally]

got these last week.

<a href="http://s431.photobucket.com/albums/qq38/MJGally/?action=view&current=P60808321024x768.jpg" target="_blank"><img src="http://i431.photobucket.com/albums/qq38/MJGally/P60808321024x768.jpg" border="0" alt="Photobucket"></a>

The T handle and the 10 in 1 screwdriver I got off the truck, the rest are from ebay.

 

[2JZGTESC300]

I just picked up a set of these E-Z RED 4 Piece Ratcheting Double Box Flare Nut Wrench Set! Will be very useful for my line of work.

Still waiting on this set next week.

 

[Cheeky81]

Latest addition to the shop

I just had to pick up the taps...Great quality for 1$ a piece it was a steal.

 

[battlegraduate09]

I have the same kit. It really comes in handy occasionally. Most of the time it sits in my box though. That little driver costs a lot of cash.

 

[JerseyBoatBuilder]

I have the same kit. It really comes in handy occasionally. Most of the time it sits in my box though. That little driver costs a lot of cash.

I get a lot of use out of my stubbys and ratcheting off set screw drivers I almost never use standard screw drivers

 

[cmandp]

Got this Kobalt 40pc 3/8 drive set to keep in my truck.

Also got some Superlube and steel wedges from Ace.

Used an oak wedge I made and a steel wedge to fix that rather large ball peen hammer. Luckily I was able to save the original handle (fit perfect in the head).

 

[Sparkfarmer]

The new Taiwan kobalt stuff looks pretty damn good eh?