supra90turbo
Well-known member
Interesting!
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
warmpancakes
Well-known member
RobertMo1988
Well-known member
lol tell him to post the video first
warmpancakes
Well-known member
canuckian
Well-known member
Nah just building onto the old igloo...saves taking the dogsled to the county building for a permit
Here's the recent additions to the igloo..errr shop. Another box o goodies from Michigan!
ianguilly
Well-known member
I'd probably do that just to find one, where the hell does everyone get these?!
warmpancakes
Well-known member
supra90turbo
Well-known member
Aww... You had me going for a minute...
Firestarter Fred
Well-known member
View attachment 227045
Picked this up for less than 1/2 price. Thought I got a pretty good deal.
Sent from Fred's iPad, now whether or not it was Fred, is up for debate.
Picked this up for less than 1/2 price. Thought I got a pretty good deal.
Sent from Fred's iPad, now whether or not it was Fred, is up for debate.
Last edited:
Brownsfan
Well-known member
Nah just building onto the old igloo...saves taking the dogsled to the county building for a permit
Here's the recent additions to the igloo..errr shop. Another box o goodies from Michigan!
I think you have the most posts in this thread. You are buying tools like there is an impending Snap On tool shortage that only you know about. Man I wish I could buy as many tools as you. Keep up the good work. Oh and what kind of box is all this loveliness in? You have got to be out room by now.
sonoma01
Active member
I am looking for another one for my son. Where did you pick it up at?
canuckian
Well-known member
nah...I don't have a lot of tools compared to others on here. I also get most of mine at deeply discounted prices (ebay, classifieds, trades, a couple of VERY helpful GJ members, etc) so they don't cost as much as one would think. Lots of time and patience can pay off. I resell a few as well. I'm also building sets for both my sons over time so a lot of what I post is things I'm gathering for them. The box? i think I posted it around here somewhere. it's an orange 68" epiq and there's also a couple carts floating around here too. The box is getting full but loads of room left yet.
shoturtle
Well-known member
Firestarter Fred
Well-known member
I bought a tool cart for someone and the dealer asked if I wanted any tools. I told him I could only afford the tool cart as it was a Christmas present. That is when he said take a look at the used bin. Paid 142 and got a lifetime warranty. Not too shabby in my book.
Sent from Fred's iPad, now whether or not it was Fred, is up for debate.
warmpancakes
Well-known member
I wont disclose price but lets just say intergalactic suckage , doesnt begin to describe it
also got a 3/4 drive proto torque wrench that was calibrated 6 months ago and a box of air tools
also got a 3/4 drive proto torque wrench that was calibrated 6 months ago and a box of air tools
Umclemrbig
MEMBER EMERITUS
I just got the blue ratchet set with the micro box. Man, I was excited until my Snap on guy pulled out the orange flex head I asked him to get me a couple of months ago and I forgot. So, something has to go! Which, I don't know yet. I would guess I could get more for the blue handles. But, he did giveme two pairs of Snap n socks and a Snapon logo overnight bag. I have no idea what to do with those.
Firestarter Fred
Well-known member
I like that top locker on your tool box. Wish I could afford a snap on box.
Sent from Fred's iPad, now whether or not it was Fred, is up for debate.
Sent from Fred's iPad, now whether or not it was Fred, is up for debate.
sonoma01
Active member
NiteWolf
Well-known member
The guys a Knipex sent me a Gift for free they wanted me to try there product out only had them a few hours and im impressed, going to have to get some more.
also went to sears and used my points to get me a gearwrench micro driver.
also went to sears and used my points to get me a gearwrench micro driver.
braol
Well-known member
Got my free 120 tooth ratchet from gearwrench in the mail today. Haven't had a chance to use it yet but look forward to it
Also got a Milwaukee 1/4 drive M12 ratchet this morning. Used it at work today and I'm loving it.
Also got a Milwaukee 1/4 drive M12 ratchet this morning. Used it at work today and I'm loving it.
canuckian
Well-known member
wide 6" and 8" adjustable wrenches from member ephotrod. Great guy to deal with!
Stopped by the flea market today on a whim. Nothing to exciting but happened to lay eyes on this guy. Not like I needed anymore but for the right price...They said $7 so I said no thanks, then they offered $4 and I felt that was fair given the great shape it was in. Was kinda hoping they'd start at $2 though 
Had to give it a new home.
Had to give it a new home. ianguilly
Well-known member
Hit the local pawn shop today and picked up these 3 SO ratchet for $80, even got $25 off for the hell of it.
Then went to sears tonignt, saw the 8 piece gearwrenches were on sale for $39. Couldn't pass that up, and got a couple other things.
Then went to sears tonignt, saw the 8 piece gearwrenches were on sale for $39. Couldn't pass that up, and got a couple other things.
DoubleA
Well-known member
Grabbed these off craigslist for $15 yesterday.
rshadd
Well-known member
Craftsman 4-pc 3/8" Extension Bar Set (Made in USA)
$3.14 (after using $7 of SYW rewards)
$3.14 (after using $7 of SYW rewards)
JayL
Well-known member
3M ROS
Young Bros
3m PPS adapter for the primer gun
Parker
Ridgid Double Flaring Tool
Lang Tools
Irwin Hanson
Gearwrench
Freud Blades
for cleaning the spray guns
Young Bros
3m PPS adapter for the primer gun
Parker
Ridgid Double Flaring Tool
Lang Tools
Irwin Hanson
Gearwrench
Freud Blades
for cleaning the spray guns
Last edited:
carterbeauford
Well-known member
60% USA made
signcrafter
Well-known member
- Joined
- May 9, 2012
- Messages
- 12,359
Did you win the lottery? Nice addition of tools!
jeffmoss26
Well-known member
Got some neat stuff today!
The top items are from an OLD hardware store in Painesville, Ohio. They have an amazing inventory of new merchandise, and a TON of old stuff too. Lots of antique tools! Had to get a pocket screwdriver, and the Harris punchdown tool was only 6 bucks...so what if I have two already.
Also made a stop at a pawn shop where I got two more Ridgid pipe wrenches for my collection, and a home-made punchdown tool. Pretty cool! They had a lot of other items, including many big ticket items (toolboxes, power tools, etc)
The top items are from an OLD hardware store in Painesville, Ohio. They have an amazing inventory of new merchandise, and a TON of old stuff too. Lots of antique tools! Had to get a pocket screwdriver, and the Harris punchdown tool was only 6 bucks...so what if I have two already.
Also made a stop at a pawn shop where I got two more Ridgid pipe wrenches for my collection, and a home-made punchdown tool. Pretty cool! They had a lot of other items, including many big ticket items (toolboxes, power tools, etc)
Brownsfan
Well-known member
Got some neat stuff today!
The top items are from an OLD hardware store in Painesville, Ohio. They have an amazing inventory of new merchandise, and a TON of old stuff too. Lots of antique tools! Had to get a pocket screwdriver, and the Harris punchdown tool was only 6 bucks...so what if I have two already.
Also made a stop at a pawn shop where I got two more Ridgid pipe wrenches for my collection, and a home-made punchdown tool. Pretty cool! They had a lot of other items, including many big ticket items (toolboxes, power tools, etc)
Where is this pawn shop? I only have one near me
jeffmoss26
Well-known member
The Pawn Shop on Mentor Ave. Had to take my dad's car to Halpert Subaru, so we had a few hours to kill.
Holt
Well-known member
Jeff is that a wooden handle with a 66 blade attached to it?
jeffmoss26
Well-known member
Close, it's a 630 blade for old wall phone plates.