Show your new tool arrivals

[TerryH]

Just picked up a new (to me) tool box for the home workshop:

Nice!! I bought the same set plus the side locker new in 1988 and they have served me well. Just replaced the lower slides a while back. It's a great set of boxes. Congrats.

 

[Lasu]

bondhus hex key set,new € 8

 

[Heavy Metal Doctor]

heavy, is that a kr 557 and 537

I didn't look at the tag yet, the sellers add said KR637 / 657. All I did was check to see each drawer slides good (felt like all roller slides) and the loaded on the truck this evening just before dinner.
I think the only reason I managed to win it on e-bay was the seller refused to hassle with shipping. He said he had a lot of emails from people begging him to ship.

 

[TerryH]

I didn't look at the tag yet, the sellers add said KR637 / 657. All I did was check to see each drawer slides good (felt like all roller slides) and the loaded on the truck this evening just before dinner.
I think the only reason I managed to win it on e-bay was the seller refused to hassle with shipping. He said he had a lot of emails from people begging him to ship.

Should be a 657/637. Would you mind telling us what you paid for the set?

 

[rickhigginshtbr]

my new coffee cup arrived:

http://www.homedepot.com/p/t/202529...toreId=10051&N=5yc1v&R=202529102#.UQX98Hfhd8E

 

[ryan t]

Had a bunch of sears points that were getting ready to expire so picked up a 6oz soft hammer for disassembling firearms and interior parts work and a 16mm open-ended wrench. Oddly enough I have every size craftsman wrench from 5mm-21mm but never had a 16. Didn't have to pay a penny for them and still have $.45 left.

 

[supra90turbo]

I love Sears rewards points. It's the only time I fill in empty spaces. Lol

 

[G1GRANDEUR]

my new coffee cup arrived:
http://www.homedepot.com/p/t/202529...toreId=10051&N=5yc1v&R=202529102#.UQX98Hfhd8E

hahaha, nice

 

[padronanniversary]

my new coffee cup arrived:

http://www.homedepot.com/p/t/202529...toreId=10051&N=5yc1v&R=202529102#.UQX98Hfhd8E

Where did u get that ? That has to be the coolest thing I've seen

 

[G1GRANDEUR]

Where did u get that ? That has to be the coolest thing I've seen

really?......haha

 

[padronanniversary]

Damn I missed that. Lol

 

[Heavy Metal Doctor]

Should be a 657/637. Would you mind telling us what you paid for the set?

Under 600 - including the gas to go get it, since it was about 20 miles from home

 

[aaron h]

new to me 30gal compressor and estwing hammer I had been eyeing

 

[jfdestree]

Got this. I was looking for Torx screwdrivers for a while but couldn't find something that suits my taste. I order another set of screwdrivers in the same time.
I found them here on the UK bargain post.
http://www.motorsport-tools.com/

Look nice but I feel the Beta quality seems a bit down?

 

[otis66]

Stopped by SEARS this morning and picked up a 14pc. Craftsman raised panel wrench set metric. Only one more metric set made in the USA on the shelf. There were only two USA made SAE sets left.

 

[supra90turbo]

my new coffee cup arrived:

http://www.homedepot.com/p/t/202529...toreId=10051&N=5yc1v&R=202529102#.UQX98Hfhd8E

I just got my shipment of 3 in today, two of which I got for a fellow GJ Canadian member who could not obtain them vis HD.

Also, note: These things are huge!

 

[matt1977]

got these from my local snap-on guy, pliers were 1/2 price.

View media item 28258
View media item 28257

 

[supra90turbo]

Half price? Damn. I thought I did good when I got a free pwcs7 with my set!

 

[bobemmerich]

My new USA made goodies:
Allen 3/8 drive SAE set Lisle spark plug wire pullers

 

[karrbass4life]

I've been needing a set of those style pliers and I love Channel Lock. I also needed another pair of Vise-Grip's in the 10WR version.

While it may not be a tool, when i was heading for check-out I ran into these organizers. I think it's a deal, a 3 piece set for $7.00 at Home Depot. Now all my bulbs, fuses, and weatherproof **** connectors are organized.

 

[karrbass4life]

This is an awesome gun. Pretty bullet proof. You'll be very happy

I used one for years when I was a tire tech. Indestructible. The only money I have in my new impact is the boot I ordered. My main daily impact is an MG725 from Snap-On.

 

[afazz]

Ridgid and Williams USA (35mm)

 

[CobraBronco]

Ingersoll Rand 114GQC Air Hammer

 

[KLG73]

I got that same air hammer, its great for the money!

 

[sdguy55]

Snappy snap ring pliers and ratcheting tap wrench

 

[CudaChick1968]

I got a nice gift from one of my customers a few days ago who is a Mac Tools guy. His note said he was tired of them bouncing around in his truck forever and knew I'd put them to good use. He's right!

The mini anvil will definitely come in handy and the trim hammer is a mere 7.1 ounces. I've still got a ways to go in getting the hammer ready for stainless (the last couple of pics are only through 600 grit) but it will see a lot of use around here.

 

[allinon72]

Channellock 460 in this pic. No idea why.

 

[NathanC]

ordered a bunch of stuff of the snappy truck today. but here's a few things i did get. digital caliper and flexible screwdriver!

 

[NathanC]

I seen them on sale at Cdn Tire the other day (one of the few tools I'd buy there). Is that where you got yours?

yeah it is. I think is was $27 ish? roughly the same price as the truck but worth the price I use them everyday!

 

[BuckHenry]

My new USA made goodies:
Allen 3/8 drive SAE set Lisle spark plug wire pullers

You'll love those plug wire pullers.

 

[karrbass4life]

Went crazy with the Snap-On. Bought a 1/4" drive extension set and got the free T72 1/4" ratchet. I finally got my FX80 I ordered two weeks ago. Got a set of 3/8" drive medium depth impact sockets for $99.

 

[03protege]

I hope that was cheap, cause it looks awfully similar to the Harbor Freight one.

 

[Skin]

hey it costs extra to get a correct graduation from 1-10.

 

[Hootbro]

I hope that was cheap, case it looks awfully similar to the Harbor Freight one.

..............

How about we spin it the other way around and say the HF one looks awfully like the Bluepoint one?

Irregardless, the are both clones of the classic Mitutoyo digital caliper that has been patent expired for years and myriad of companies have cloned their own models.

It would be reckless to infer the Bluepoint is made to the same quality standard as the HF one. Besides, there is minor nuances between the two like the battery compartment door and a few other things.

 

[lennoxlennox]

Gearwrench 50mm, 46mm and 41mm

Gearwrench 27mm, 30mm Allen (Danaher) 32mm & 34 mm

16 oz Fatmax Antivibe hammer (same as Mac, just much cheaper) to go with my 32 oz.

 

[NathanC]

I hope that was cheap, case it looks awfully similar to the Harbor Freight one.

looks similar but not the same, im sure the quality isn't quite the same either. besides i'm in canada we don't have harbor freight

 

[NathanC]

Went crazy with the Snap-On. Bought a 1/4" drive extension set and got the free T72 1/4" ratchet. I finally got my FX80 I ordered two weeks ago. Got a set of 3/8" drive medium depth impact sockets for $99.

those are nice ratchets, I love mine! good buy

 

[JasonJ]

I needed a big caliper to setup my new shocks on the Harley. The black mat is also new, It's a cupboard liner that I thought I would try on the work bench.

 

[03protege]

I bought this Fowler set today that includes 6" dial caliper and 0-1" micrometer, for the $85 I spent I am not too happy with it. The micrometer seems to be very nice but the finish on the caliper is pretty poor. Unfortunately I didn't have to to wait and seek out some better deals.

Also I am almost positive the COO is China but no where on the items, literature, or packaging does it list where it was manufactured.

 

[Toolhorder]

I needed a big caliper to setup my new shocks on the Harley. The black mat is also new, It's a cupboard liner that I thought I would try on the work bench.

Harley's have shocks???