Chadwilliam1
Well-known member
oxjaw, if you got everything in those 2 pictures for 85 dollars you did really well.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
OxJaw
Well-known member
Thanks, I thought so, and yes everything in both pictures for $85.
Mike14k
Well-known member
Found a junk + tool place on my last biz trip. Dug thru the bins and came up with:
(2) Fuller screwdrivers
(1) small Snap-on phillips
(1) Proto stubby box end wrench
(2) USA wooden handle screwdrivers
(2) Williams flare wrenches
(1) S-K flare wrench
(1) Craftsman 5/8 socket/open end combo wrench
Really didn't need any of these but the price was right.... $10.92 for the lot
(2) Fuller screwdrivers
(1) small Snap-on phillips
(1) Proto stubby box end wrench
(2) USA wooden handle screwdrivers
(2) Williams flare wrenches
(1) S-K flare wrench
(1) Craftsman 5/8 socket/open end combo wrench
Really didn't need any of these but the price was right.... $10.92 for the lot
rickhigginshtbr
Well-known member
$11 for the dead on 24oz hammer and small CMan pro phillips after using my SYWR points, not too shabby.
jfdestree
Well-known member
Stanley Straight jaws 45mm vise grip.
Seems to be good quality for 15€/20$.
Seems to be good quality for 15€/20$.
Picked up the Ingersoll Rand 3101G angle grinder (left). There was nothing wrong with my old Eagle Industries grinder other than its 14 cfm air consumption which was a tad more than the max 4.5 cfm my compressor puts out. I've heard mixed things about the Edge series tools from IR so time will tell.
Chadwilliam1
Well-known member
I have a few Edge products and they are great.
fourtythree
Well-known member
Chris_PT
Well-known member
Be careful, it's a slippery slope
TerryH
Well-known member
^^^ What he said. ^^^
robe5000
Well-known member
supra90turbo
Well-known member
I was looking at that exact one in the tool guy's flyer at work. The Innova scan tools are extremely easy to use and are fast!
Brownsfan
Well-known member
A junkie will always find a way to get his fix. You opened pandoras box. It's all down hill from here. Next thing you know you have 20 ratchets and a full assortment of other snap on tools then you will be shopping for a snap on box.
knocker
Well-known member
Had them for over a month but haven't had time to post. Snap on 7mm and 12mm 1/4 drive swivel's, retail for $40 each my dealer gave them to me for $25 each. I also ordered an 8,10,13mm but that was over a month ago. He takes forever to get stuff, I'm just going to get them from matco, I can get a good deal from them.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Chris_PT
Well-known member
^Very nice
matt1977
Well-known member
the1nonlyjl
Banned
Thought of giving it a try with these two items. It's on my woman's banging bucks $$$
Chadwilliam1
Well-known member
Ebay win $23 shipped. Brand new 42470!
dgreen1069
Well-known member
- Joined
- Jan 8, 2013
- Messages
- 136
PS - Sorry for the crappy pix, they were taken on my phone.
marlinspike
Well-known member
Shipment from Ash
Very nice!!
pawnshop:
Wow that must be a rare misprint; everything is upside-down!
Rebelphotog
Well-known member
Here are a few from the past week or two
Pictured:
Bosch CS5 Left-side-blade 15amp 7 1/4" Circular Saw
Black & Decker Jigsaw (had the best reviews of all the saws I looked at under $150)
Wiha Softgrip set
Felo 800 set
DeWalt Driver Bits
Not Pictured:
Porter Cable Forstner Bits
DeWalt Drill Bit set
Irwin Paddle Bit set
Dewalt Wood Chisel set (very nice!)
Still have a few more items on my list (more screwdrivers, nut drivers, pliers, belt sander, oscillating sander, and some others), so should have some more to post soon.
Pictured:
Bosch CS5 Left-side-blade 15amp 7 1/4" Circular Saw
Black & Decker Jigsaw (had the best reviews of all the saws I looked at under $150)
Wiha Softgrip set
Felo 800 set
DeWalt Driver Bits
Not Pictured:
Porter Cable Forstner Bits
DeWalt Drill Bit set
Irwin Paddle Bit set
Dewalt Wood Chisel set (very nice!)
Still have a few more items on my list (more screwdrivers, nut drivers, pliers, belt sander, oscillating sander, and some others), so should have some more to post soon.
91bronc300
Well-known member
- Joined
- Oct 19, 2009
- Messages
- 2,559
Shipment from Ash
Some goofing looking Wera screwdrivers you've got there. I like 'em
shocksandstrutz
Well-known member
ACepero - where did you get you DEWALT ratcheting screwdriver....and do you like it??
dgreen1069 - nice gearwrench haul......looks like you found a brand you like
dgreen1069 - nice gearwrench haul......looks like you found a brand you like
dgreen1069
Well-known member
- Joined
- Jan 8, 2013
- Messages
- 136
To be honest, my recent purchase is my first with Gearwrench. I went to buy the screwdrivers and found them on sale at ntxtools.com along with a buy one get one free. I went ahead and kept shopping the bogo deals and ended up with everything you see. Paid $483 for everything (including 2 torque wrenches) and received ultrafast shipping (ordered Sat. night and received on Tuesday). Ntxtools.com doesn't seem to have the best rep. on this forum, but my first experience with them was outstanding!!! Saved around $200 over tooltopia.com
redwrench60
Well-known member
GTA Matt
Well-known member
Don't know why, but I've been on a wrench kick lately. Tool Topia had a BOGO on extra long combo wrenches and stubbys. Also scored gearwrench half moons off ebay and Matco was running a BOGO on non-ratcheting half moons. After some research here, I finally found a set of wrench organizers I like (Ernst) as well.
Ironically, I found that at Home Depot. I was purchasing plywood for my workbench top and found the ratcheting screwdriver and included bit set near the register. $10.
I've used it a couple of times and its pretty good. The ratcheting part of the screwdriver isn't as smooth as the Snap-On. It came with slotted, Phillips, and Torx bits. For the price, it's a great tool.
Sent from my iPhone using Tapatalk
marlinspike
Well-known member
Some goofing looking Wera screwdrivers you've got there. I like 'em
T3 and T5 torx for electronics.