Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Roland-5.0
Well-known member
Just grabbed this stuff today for home.
Grease gun because I don't have one for home
21 PC bit set...because for 80% off I couldn't buy a 3/8's driver handle for that price
And the rounded bolt sockets cause they are a life saver here in rust central.
Grease gun because I don't have one for home
21 PC bit set...because for 80% off I couldn't buy a 3/8's driver handle for that price
And the rounded bolt sockets cause they are a life saver here in rust central.
supra90turbo
Well-known member
oh no i bought the wrong one !!!
Inb4 picture of every x-acto handle ever made
jjjrmx5
Well-known member
LOL.
I've been using x-actos since the mid 70's and prolly have 5,000 #11 blades in 500 blade bulk packs all USA made in the office coffers. And more holders than I can count.
Almost lost my left middle finger to a errant blade cut at the middle knuckle decades ago. I can stiff flip folks off left handed now, but it hurts like a bi^&h when the weather changes as I get older.
LOLOLOL.
I think I have a Japan made swivel blade micro cutter that is decades old around here somewhere.
Last edited:
Nocturnal-G
Well-known member
Hafen_Kafer
Well-known member
Congratulations on your new Hazet acquisition.
marlinspike
Well-known member
Last edited:
shoggoth80
Well-known member
That Hazet set is rather nice. Jealous.
ianguilly
Well-known member
Fresh off the SO truck FLL80, and orange clip tools
Mint old school files from eBay
Mint old school files from eBay
NineFingerFury
Well-known member
Pliers rack is a MUST have for any tool box. It frees up so much space by using the vertical space you would use by stacking tools.
I must have one. Where'd you get it? Part #?
NineFingerFury
Well-known member
SO 10-19mm standard, chrome, Flank Drive. $150 eBay.
jeffmoss26
Well-known member
Ian those files are nice!!!!
Geurt
Well-known member
Funky wrenches. Made in the USA!
Chadwilliam1
Well-known member
craftsman modules USA and craftsman industrial USA ratchet wrenches.
ianguilly
Well-known member
They are very heavy duty.
Part numbers for those hard handle trim tools?
canuckian
Well-known member
a161bo
a177ao
found them on the canadian SO website but they don't come up on the US site
ianguilly
Well-known member
Full size, like SDDP2 handle.
I bought a 18" Crescent adjustable wrench yesterday for $30 and I bought a 4" old style Craftsman adjustable wrench for $10. A bit bit much for a 4" Cman but you just don't see them very often.
So now I have a 24" Diamonloy, 18", 15", 12", 10", 8", 6", 4" Crescent wrench and 12", 10,"8", 6", 4"new and 4" old style Craftsman adjustable wrench sets.
I also got a old screwdriver that the handles were gone from. I would assume they were wooden. There is a small U.S. cast into the handle part of the driver. The end was buggered up some so I used a few strokes from a file to fix that. Anyone know or seen a screwdriver like this before. I am guessing WWII production.
So now I have a 24" Diamonloy, 18", 15", 12", 10", 8", 6", 4" Crescent wrench and 12", 10,"8", 6", 4"new and 4" old style Craftsman adjustable wrench sets.
I also got a old screwdriver that the handles were gone from. I would assume they were wooden. There is a small U.S. cast into the handle part of the driver. The end was buggered up some so I used a few strokes from a file to fix that. Anyone know or seen a screwdriver like this before. I am guessing WWII production.
Attachments
Hafen_Kafer
Well-known member
Went to a state sell and most measuring tools I wanted were too expensive for my taste. Went to the other bins and found all this for $10
Organizer tray. Served me to carry all this stuff.
Three SO screw drivers. The stubby has major rust.
Adjustable hook spaner wrench.
Two feeler gauges. One 25 piece and one 10 piece with a 2 inch ruler.
German MM thread pitch gauge
Ullman inspection mirror. Non telescopic.
Great Neck trim puller.
Nicholson file brush.
Blue Point Drift pin. I can't never have too many of those.
Two small wooden handle screwdrivers. Because they looked cool.
Everything USA stamped except for the tray,wooden screwdrivers and the pitch gauge.
Organizer tray. Served me to carry all this stuff.
Three SO screw drivers. The stubby has major rust.
Adjustable hook spaner wrench.
Two feeler gauges. One 25 piece and one 10 piece with a 2 inch ruler.
German MM thread pitch gauge
Ullman inspection mirror. Non telescopic.
Great Neck trim puller.
Nicholson file brush.
Blue Point Drift pin. I can't never have too many of those.
Two small wooden handle screwdrivers. Because they looked cool.
Everything USA stamped except for the tray,wooden screwdrivers and the pitch gauge.
Nocturnal-G
Well-known member
jeffmoss26
Well-known member
Nice stuff Hafen. You should post those finds in the Garage Sale Season thread here as well!
http://www.garagejournal.com/forum/showthread.php?t=180993
http://www.garagejournal.com/forum/showthread.php?t=180993
allinon72
Well-known member
I have that bit set...the larger ones are ok but the smaller ones snap easily.
dodge610
Well-known member
atwageman what did the ratchets run I heed to get some of the swivel head 1/4 inch drive ones.
I don't have the receipt in front of me, but I believe they were less than $15 each.
Bryanthegreat
Well-known member
I finally pulled the plug and bought some ...
Dimitri
- SK 40953 - 1/4" Drive Spinner Extension Handle - 6"
- SK 91860 - 60 Pc. 1/4" Drive 6 Point Fractional/Metric Chrome Socket Super
- SK 94549 - 49 Piece 3/8" Drive 6 Point Fractional/Metric Socket set
Dimitri
Sincitymetalworks
Well-known member
96snma
Well-known member
RMSG just went and picked some up thanks to that post. Needed some for my bike pack. Also every lisle product seemed to be on sale
PrecisionTools
Well-known member
Been after one of these for a while.
JayL
Well-known member
Bosch cordless bandsaw
