Show your new tool arrivals

[Fastbird]

Got all this today for $40.



Pretty happy with that.

 

[Chadwilliam1]

just got this at work. made in USA, seems pretty nice so far.

 

[bry@n]

Picked these up today.

semi deep metric impadcts

3/8" SAE deep impacts.

Racheting screwdriver in blue

a fender cover

and a dealer promo wrench. I borrowed the pic from chadster1's post last year.

 

[JJThrasher]

One of my arrivals. I should have three more packages in the next two days.

 

[Zeroek]

Love these

 

[turdferguson13]

Green instinct hard handle screwdriver set and an organizer for my tool box. Didn't even know they had hard handle instincts until today.

 

[Carsandtools]

I bought some very useful Snap-on tools: a 17-1/2" extra long 80 tooth ratchet and a 6-piece electrical terminal tool kit. Picture attached.

Many times I'm working on a car and realize that I need a longer handled ratchet but I'm usually not in a position to order it and wait for it to arrive. Next time, I will already have it.

The terminal tools really work well for troubleshooting automotive wiring harnesses. I had some other terminal picks but they were wearing out and I decided to replace them with Snap-on.

 

[ihateminimumwage]

Well, the ol' lady's been out of town this week, so I've been buying some stuff on my wishlist to get it out of the way.


Bought a couple of the Coast headlamps through Home Depot for $8 a piece. Very happy with the one I took to work so far.
3M Peltor H10A Optime 105 Earmuffs
IR SK6H8L 3/4" Dr. SAE Deep Impact Socket Set (1"-1 1/2")- No complaints for $67 shipped from an ebay store.
Channellock 360 Welpers - Finally can throw away my garbage HF welpers
M12 drill/driver kit, got a free 1/4" hex impact with the Home Depot deal. Very happy for $130 out the door. Consider me a M12 convert now.

Still have a couple of things coming in the mail tomorrow, they should show up before I pick her up from the airport...

 

[Canadian Charlie]

Love these

This could be my next purchase

 

[Zeroek]

This could be my next purchase

Left one is from menards. The right is blue point.

 

[cburnscrx]

Craftsman Professional flare nut wrench set - Made in USA. Bought them used off eBay, and they're soaking in some evaporust. Nothing bad at all, just want to clean them up a bit.



Not sure what the K stamping on them is for, but my guess is they were made by SK?

 

[Subyroo651]

Love these

Are they any specific brand? I m looking for a pair as well.

 

[Monte]

Are they any specific brand? I m looking for a pair as well.

the blue one seems to be from CEJN - Made in sweden
http://www.cejn.com/Products/Pneumatics/Air--Fluid-Guns/Air--Fluid-Guns/

 

[Super Sport]

Craftsman Professional flare nut wrench set - Made in USA. Bought them used off eBay, and they're soaking in some evaporust. Nothing bad at all, just want to clean them up a bit.

Not sure what the K stamping on them is for, but my guess is they were made by SK?

Yes sir, that indicates that they are SK-made.

They are very nice wrenches, I have some myself.

 

[Chuck122]

^ ^ Cool . . . you must be VIP purchaser of SnapOn !!

Or, he used these:
http://buy1.snapon.com/catalog/item...roup_ID=680952&store=snapon-store&dir=catalog

 

[Subyroo651]

Or, he used these:
http://buy1.snapon.com/catalog/item...roup_ID=680952&store=snapon-store&dir=catalog

Yea, I saw that in the latest Circular

 

[priceman1414]

Crafstman three-inch 1/4" and 1/2" extensions.

Thread checker - first saw one on this thread. Decided to get one myself. Ordered thru amazon.

 

[bahcoswed]

It eats whatever you feed it with Nasty thing this Knipex bolt cutter! <a href="http://www.pictures.se/bilder/7hFxQ.jpg"><img src="http://www.pictures.se/bilder/7hFxQ.th.jpg" border="0" /></a>

 

[jjjrmx5]

It eats whatever you feed it with Nasty thing this Knipex bolt cutter! <a href="http://www.pictures.se/bilder/7hFxQ.jpg"><img src="http://www.pictures.se/bilder/7hFxQ.th.jpg" border="0" /></a>

LOLZZZZZ.

Knipex.

Keep them out of bright light.
Don't get them wet.
And Don't ever never feed them after midnight.

Wait...what?

#gooniesgoknipex



I have a box full as a result.
Damn.

 

[1973]

Just thought I would show my recent purchases. Thanks to all the people who post the great deals!

Cheers

Sorry about the bad pics, a camera is next on the list

 

[Zeroek]

Are they any specific brand? I m looking for a pair as well.

Blue Point is the blue one and the red one I got from Menards. I think it was Tool Shop or something. I'm gonna get the Red one in the short size for home.

 

[Bouchard93]

where did u get those crescent usa set?

 

[1973]

I found the USA Crescents at Lowes had to go to a couple of stores to find all of them.

 

[csmitty]

Got some orange goodies
Can never have to many picks.

 

[atwageman]

Proto 3/8" dr

 

[foreverfalcon40]

O man where to start...

Due to this site I check my Local Sears Deals...

They had a few items at 50% off, so I picked up 2 8oz USA Ball Pein Hammers (less then 5 each), 12oz USA Ball Pein Hammer ($11), 2lb USA Dead Blow ($20) and a 40oz USA Black Smith Hammer ($14). I also scored a USA Metric Set Flared Crowsfoot 10pc. (Now all I need to complete my Cman Crows foot set is Non Flare in Metric). I also just got delivered the Cman USA 42 pc Swicel Socket set. The swivel socket set not available for quite some time and I signed up for e-mail notification (which I never got) and I was just grazing through online and they available. Ran to my local Sears (so the kid gets commission) and ordered it (pray it was USA) Got is for $174 after my SYWR. HAPPY HAPPY IT IS USA!
A Few Misc Sockets cuz I am on a kick to fill empty spots in my socket tray holder. Got some 1/2 USA 6 pt Sockets.




Also ordered 3 of the Coast CL5 Headlights from HD from the Hot Deals Section. THEY ARE BRIGHT and everyone in my shop wants one now. 1 out of 3 I ordered for myself did not work, wiring issue but still very pleased!


http://s270.photobucket.com/user/foreverfalcon40/library/?view=recent&page=1




A set of USA SAE Impact Sockets, I thought it was surface rust from shelf life but when I took them out of the package they were actually used. I threw them on my gun and they held tight so I was happy. They do not match my Cman Industrial Impacts (I have 85 pieces) but begger's can not be choosers.



Set of Cman Profession Metric Wrench Set for the home box. Goes well with my CM Industrial SAE set that I got off the hot deals. One of the pics I threw my SO wrench on top they are identical!

 

[Next611]

Got some used mac semi deeps, a few missing but it was priced right.

 

[dsmnickk90]

Dammit, now I'm going to have to order a set of those hex impacts

They are discontinued. You can only find the standard set. I looked everywhere for metric with no luck

 

[atwageman]

Astro Pneumatic SAE flex socket set 6pt 1/4dr. I already had the metric set.

 

[Zeroek]

Figured I'd get this short one too. Menards for $4.26. Wanted to compare it to the blue point I bought for $18.00

 

[rshadd]

Joined the Harry J Epstein Co. fan club.. My first purchase.

1" Wilde Gasket Scraper, Magnolia #270 Stainless Steel Cleaning Brush and a Magnolia #271 Brass Cleaning Brush.

 

[rmsg0040]

Dewalt 20V XR hammer drill DCD795D2

Positive notes: led placement, batteries made in Japan, XR batteries work on all 20V max tools, existing 20V max batteries work on their new brushless tools.

 

[BJ42LX]

Got some used mac semi deeps, a few missing but it was priced right.

Arrg! Good score. A "few missing" leads to the best and worst deals ever:

I bought an SK 1/4" drive set with a "few missing" sockets for $25. "A few" sockets to fill out the set are going to cost $35!! And it bugs me that the set is not complete.

Arrg!

 

[rollscanhardly]

picked up a one off deal i noticed on the sears website, eastwood had this set for $59.99 plus free shipping with my sywr

after i ordered it, i was going to order a second set of a buddy and the online price went to 89 or something like that

also, notice the 12" is a different wrench design than the pic on the box and the other two

 

[GarageNewbie24]

New Cyclone Dust Collector for the shop ($700 Craigslist)

Used HF 44" Toolbox ($200 Craigslist) &
Everlast 160sth Stick/Tig Welder(top left corner of toolbox)

 

[knocker]

Snappy man got me last week, sometimes I hate that truck…

It's their new 3/8 techangle wrench

 

[ADSR]

Joined the Harry J Epstein Co. fan club.. My first purchase.

1" Wilde Gasket Scraper, Magnolia #270 Stainless Steel Cleaning Brush and a Magnolia #271 Brass Cleaning Brush.

Saw that scraper and had to buy all three they had. Never ordered from them before and they do ship to canada.

pics when they come in.

 

[kiatech]

Didn't buy it but never seen a 46mm ratcheting wrench. That's a standard chapstick tube next to it.

 

[zruvalcaba]

Picked up this Hein Werner 2 ton jack from Jack-X-Change today for $323 out the door.

 

[losabio]

Didn't buy it but never seen a 46mm ratcheting wrench. That's a standard chapstick tube next to it.

Remember to keep a 46mm box end wrench on hand so that you can initially break the fastener.