To avoid these ads, REGISTER NOW!

Show your new tool arrivals

To avoid these ads, REGISTER NOW!
O

Outlander

Well-known member
Joined
Jul 30, 2010
Messages
5,154
Location
Quebec, Canada
Double post, I know.

attachment.php


Channellock goodness and some Canadian PicQuic. 25% off the Channellocks and $19 for the set of drivers.
 
A

ADSR

Well-known member
Joined
Jan 12, 2013
Messages
10,713
Chuck122 said:
I guess you enjoy Canadian tire channellock sales as much as I do
Bien fait!
Click to expand...

homedepots everyday prices on channel lock are the same cantire on sale. I take the cantire flyer in to homedepot and they match the 25% off on their price. :rocker:
 
O

Outlander

Well-known member
Joined
Jul 30, 2010
Messages
5,154
Location
Quebec, Canada
LORDDiESEL said:
homedepots everyday prices on channel lock are the same cantire on sale. I take the cantire flyer in to homedepot and they match the 25% off on their price. :rocker:
Click to expand...

Never noticed that! I'll look for some loose change under my seat and see if there is more blue goodness to be had.

Home Depot web site does not reflect this http://www.homedepot.ca/webapp/wcs/stores/servlet/SearchView?catalogId=10051&storeId=10051&langId=-15&N=0&Ntt=channellock&Nty=1&D=channellock&Ntx=mode+matchallpartial&Dx=mode+matchallpartial&s=true

Example: 8" needle nose at CT $22.99 ($17.24 on sale) and at HD $21.97. If they match 25% off their price there are more savings to be had.
 
Last edited:
C

Chuck122

Well-known member
Joined
Feb 17, 2013
Messages
490
Location
Québec, Canada
LORDDiESEL said:
homedepots everyday prices on channel lock are the same cantire on sale. I take the cantire flyer in to homedepot and they match the 25% off on their price. :rocker:
Click to expand...

Does that include every cl pliers at Home Depot? Cause they have some large end-cutter that are not availlable at Canadian tire
 
X

xurusaibobx

Well-known member
Joined
Jul 23, 2011
Messages
365
rmsg0040 said:
Do you think that the dewalt 12V batteries would interchange on the mac impact?

Cost of kit?

200 ft lb on 12V is crazy!

Thanks
Click to expand...

the mac batteries are the same on the mac tools it even says dewalt on them. same 20v/12v charger as well.


i already tried taking off lug nuts off a gm 100 lb torque and it took it off. of course a little longer then a 20v impact but none the less it can do it if you need to.

the 20v mac is beefy too lighter then the Snap on 20v. the weight is more balanced then matco n snap on. My dealer said he removed lug nuts off a City bus with no problems. he said it was close to the IR gun
 
A

ADSR

Well-known member
Joined
Jan 12, 2013
Messages
10,713
rmsg0040 said:
On their site, its says only 10%
Click to expand...

My local store says they will beat non sale prices by 10%

But they will match a sales flyer.

On fathers day, CT had channellock on for 40% off.

I took the flyer in to HD and bought everything that CT doesn't stock in the CL line.
 
K

kiatech

Well-known member
Joined
Aug 23, 2012
Messages
2,570
Location
Toledo, Ohio
I paid $20 for it, the guy wanted $30 for it. I gave him my number so he could call and take $20 for it, which he did :D
 
L

Lippyp

Well-known member
Joined
Jun 26, 2006
Messages
6,720
Location
Shropshire, UK
Latest tool purchase was one of these

http://www.evolutionpowertools.com/uk/project/fury3xl.html

only mine is a special edition in black. My old Ryobi chop saw started getting more and more inaccurate, when I gave it a good lock over to try and work out why I found that the casting it pivots on had actually snapped and it was moving about. I was over at my place in France in the middle of building a deck at the time and so my choice were pretty limited but this allows me to cut up to 3mm steel, wood, aluminium and plastic all with one blade plus its a sliding saw versus my old ryobi just being a standard compound mitre so it has better capacity. Cuts nice.
 
S

STGFordCrazy04

Well-known member
Joined
Dec 20, 2012
Messages
289
Location
St. George, SC
Bearing puller and SO 1 5/16" and 1 7/16" 3/4" drive impact sockets



The sockets are well used off ebay and shown a little rust. I know its probably sacrilege but I skuffed them really quick with 320 grit sand paper and sprayed them with some flat black enamel. If nothing else they look good for now. The 1 7/16 fits the hex portion of the bearing puller and the 1 5/16 fits the pinion nut on the Dana 60 swapped gears in recently.




Now I need to buy a GLA12B 3/4x1/2 adapter.
 
K

kyrbz

Well-known member
Joined
Jan 30, 2012
Messages
1,314
Location
midwest US
STUDPRO-2500 stud welder I purchased for a recently completed commission. I also attached a few pics of the project I purchased this for.
 

Attachments

  • ury4.jpg
    ury4.jpg
    115.3 KB · Views: 225
  • ury1.jpg
    ury1.jpg
    110.6 KB · Views: 302
  • weld2.jpg
    weld2.jpg
    93.1 KB · Views: 1,280
  • weld1.jpg
    weld1.jpg
    92.1 KB · Views: 217
  • stud2.jpg
    stud2.jpg
    58.9 KB · Views: 210
  • stud1.jpg
    stud1.jpg
    56.6 KB · Views: 225
  • studgun.jpg
    studgun.jpg
    69.5 KB · Views: 195
To avoid these ads, REGISTER NOW!
A

ADSR

Well-known member
Joined
Jan 12, 2013
Messages
10,713
kyrbz.

Looking at picture 7, that would almost drive a man crazy putting all that together!

Nice work!
 
K

Kaervak

Well-known member
Joined
May 12, 2010
Messages
826
Location
Cleveland, OH
Had some spare cash to burn, figured "what the hell, why not?" I'm quite impressed so far. With just the Ni-Cad pack it pounds off the lug nuts on my car faster than the Harbor Freight 120V AC one does.
 

Attachments

  • Nrecofv.jpg
    Nrecofv.jpg
    141.8 KB · Views: 46
P

pault28

Well-known member
Joined
Jan 24, 2011
Messages
475
Location
Westchester, IL
Within the past month and a half I've gotten a Snap On 10-19 FD+ wrench set, Snap On green hard handled screwdriver set, Snap On green ratcheting screwdriver, Snap On green 4 piece plier set, Snap On fhlf80, Snap On shlf80a, Snap On 1/2" drive 6pt 12-24 deep and shallow sockets, Snap On 1/4"drive 5-15 deep and shallow sockets, Snap On 1/2" extension set, Snap On 1/4" extension set, Snap On 1/2" comfort handle breaker bar, Snap On t72, Snap On SH80a, Snap On green 1/4" drive hard handled swivel ratchet, Snap On green 16 & 32oz dead blow hammers, Snap On green 16 & 24oz died blow hammers, snap on flourescent light, Snap On green mini pick set, a milton air chuck/inflator and a kershaw green snap on knife, and craftsman usa 12 pc professional reversible ratcheting combo wrenches. Snap On 3/8" deep and shallow sockets and extensions are the next purchase! Then Snap On green pry bars and Allen and torx sockets. Then I think I'll be done for a while!
84C35CF1-88C7-4958-A7A1-A0742148EA3F-10529-00000D5EDC84C6DE_zpsf5a7932c.jpg

805A64B4-1096-4A3B-B540-532923662AA1-10529-00000D5EE8071474_zps2bd46710.jpg

1AB742B2-C3DA-4F89-B50A-6BC9AF8C3EC3-10529-00000D5EFC097A73_zps858d40a2.jpg

9274E410-0352-4F88-853F-8CAAE6DC6419-10529-00000D5F11B57793_zps4c520c53.jpg
 
Last edited:
R

RatchetMan

Well-known member
Joined
Sep 23, 2011
Messages
199
rival904 said:
I thought a breaker bar included?

Anyways.
HF 24in breaker bar ~10 bucks after coupon
Gearwrench E-Torx set ~ $20 from Cripe
Bogo Snap-On Flank Drive plus wrenches

null_zps39952abc.jpg
null_zpse0573ca8.jpg
null_zpsc18269e0.jpg
Click to expand...

Is the BOGO on the flank drive set something that every driver is now offering?
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom