Show your new tool arrivals

[kiatech]

Screwdriver was 50% off and then I had $8 SYWR points so it was $3. case knives were on clearance at lowes for $3.14 (and they are murrican made)

 

[kunkernator]

Screwdriver was 50% off and then I had $8 SYWR points so it was $3. case knives were on clearance at lowes for $3.14 (and they are murrican made)

I grabbed two sets of those ratchet straps from Costco last week. Chinese "Snap On endorsed", but i didnt buy them because of the name.... For $20, you get some damn good straps.

 

[Carves]

$20 each in AUS where is this from il have to get in on that

Bunnings, of all places ..

They only have a very limited selection tho ... which are listed on their website.

If you want any different types than what they have,

... I'd suggest you see what this bloke in california can do for you

http://german-hand-tools.com/nws-products.html

.

 

[daddy2coull]

Snappy guy got me again today...CT8810O (gave me what I paid for the 4410 on trade), SAE nut drivers(on sale) and the 6 & 7mm ratcheting reversible wrenches (free!). Grabbed a couple wrench racks as well that didn't make it into the picture.
Also received a Fluke 113 meter in the mail that member Jeff Moss was kind enough to grab at his local Lowes (IIRC) for me when they were clearing them out. Thanks again Jeff!

i'm loving the CT8810, no sign of them over here in the UK yet, did i read correctly? is that an O on the end of the part number and are the batteries orange too?

 

[canuckian]

i'm loving the CT8810, no sign of them over here in the UK yet, did i read correctly? is that an O on the end of the part number and are the batteries orange too?

Yes, you read right. it's the orange one. The batteries are orange as well. Sadly though, it's not as bright of an orange as past tools. More red than anything. The CT4410 I traded for it looked way more orange. I thought this one was red first when the driver handed it to me until I held it up next to a red impact. But performance wise, this thing is a beast! havent touched my 1/2 impact since I got it!

 

[daddy2coull]

Man I need one of those now. My local snap on dealer is trying to find some details for me as I type

 

[kiatech]

For $20, you get some damn good straps.

Ineed! I don't think you can buy any better for the same or less money...

 

[gsingh]

Tools from a while back.

Bottom two pics, these are the tools that i got from my co workers. The SK ratchet, craftsman and the easco ratchets were seized and had years of dirt in them. Cleaned them up and put some super lube in em, and they work fine now. Also got some wright craftsman, sk , blackhawk.

 

[d-rive]

Not really a tool... a new pair of Beta's protective shoes and two Makita abrasives disks, one for grinding, one for cutting the stainless steel (inox).

 

[Hootbro]

Mayhew bearing race punch set. Recent Sears online deal for $39 (now expired).

 

[JBradley500]

Got this NIB Armstrong 11-935a 3/8" speeder for $3.26 plus shipping on eBay.

 

[Dubbydoo]

Screwdriver was 50% off and then I had $8 SYWR points so it was $3. case knives were on clearance at lowes for $3.14 (and they are murrican made)

I bought those strap about 8 months ago for 20$ well worth it some damn good straps

 

[priceman1414]

Got the last 1/2" drive flex ratchet at the local Menards.

 

[acmech]

Just picked up a 3/4" drive set. 1" through 2" sockets( mixed craftsman, plvmb and sk), plvmb breaker bar, wright ratchet and slider bar, 2 unmarked extensions and carry tray. $60 at local antique store.

 

[katotter]

Is it fair to post my shop's arrivals?

Some Wera screwdrivers and Stanley cheap sets for the stingy bastards.

 

[chris30066]

A few finds from the past month.

 

[Rusty Kustoms]

More storage!

 

[nev]

Sent from my GT-I9300 using Tapatalk

 

[3xpendable]

From our buddy matt_m. He was great to deal with great packing and boy was he ever on the ball getting it shipped out. He described them very well too. Thanks Matt!!!


Sent from under an open range fifth wheel 8p

 

[MJB24]

Made my first ever trip to Harbor Freight on Saturday.

25" 1/2" Breaker Bar for $11.99 and a 25% off coupon
6pc Screwdriver Set Free with Coupon
4pc ratcheting tie downs On sale for $6.99

Grand total with tax for everything was $17.12

 

[98sierra]

Don't tie down anything you like with those straps. Ones I bought I could break by hand.

 

[Super Sport]

Don't tie down anything you like with those straps. Ones I bought I could break by hand.

I've got some red ratchet straps from HF. They certainly are cheap, but I've yet to break one. I've hauled some pretty heavy stuff too!

 

[MJB24]

Don't tie down anything you like with those straps. Ones I bought I could break by hand.

Yeah I have 4 decent ones already. these are nice for using to tie down my EZ up. I wont be using them for much else. I did notice someone selling these on my local craigslist. They are obviously HF ones that he is selling opened and "new" at more than double the cost.

 

[Flybye]

New Ingersoll Rand SK34C86 86 piece SAE & metric IMPACT set.

eBay has a seller with an amazing deal on them right now. $186 shipped.

 

[MJB24]

New Ingersoll Rand SK34C86 86 piece SAE & metric IMPACT set.

eBay has a seller with an amazing deal on them right now. $186 shipped.

I like the deal and love the sockets. But the case seems like it wastes a ton of space

 

[Flybye]

I like the deal and love the sockets. But the case seems like it wastes a ton of space

It is rather bulky, but the entire set weighs about 35lbs. You can imagine if the case is too thin it would simply fall apart. Not that I care. I'll be putting all the sockets on racks anyways.

 

[nmcqueen469]

US GENERAL 5 drawer rolling cart from Harbor Freight. Very impressed with the sturdiness and ease of assembly.

On sale for $199, had a coupon for $169...aaaaaand it was crunched on a top corner when I got home and unboxed it

Took it back...aaaaaaaand the second one has a very small imperfection, so they gave me $30 back. Perfectly happy with that resolution and the cart.

 

[scaron]

finally closed on the house! so, a few housewarming presents for myself...

went to HD and picked up this milwaukee hammer drill, plus i found this nice deal from klein and couldn't help myself:

​

here's the details on that if you're curious. all that klein for only $40! keep an eye out for that one if you're making the rounds at HD. it caught me by surprise and i just couldn't say no, at that price.

​

i also got a few goodies from epstein's this week, some bonney offset DBEs in metric and SAE, some S-K pozidriv and robertson tip screwdrivers on clearance, and a 1/4" bonney valve stem socket. i really like the finish on the old bonney products, especially the combination wrenches (not pictured here).

​

i've got one more order in with epstein's, then i think i've just about tapped them out for everything i'm looking for i'll say it again, it's a great place to get quality domestically made tools.

 

[BK13]

I was digging through my storage unit and found some stuff I forgot about/didn't know I had:

I have a bit of an Estwing thing

Mostly pliers and wrenches. I honestly don't remember buying the ratcheting Huskys.

Sears trip.

Mostly power tools

Found my nunchucks!

 

[boosteddsm92]

Don't tie down anything you like with those straps. Ones I bought I could break by hand.

Hmm, I have the same ones and have used them to tie down all kinds of stuff. Admittedly lots of stuff I definitely shouldn't have been using them to secure and they've held up fine.

 

[Mr. Woodside]

Some ebaying... Facom combi wrenches, and Bahco ratchets.


Sent from my iPad using Tapatalk - now Free

 

[shiftdrift]

Love them

 

[NUTTSGT]

More storage!

Did you buy another or both of them together ?

 

[rshadd]

Weiler 6" Crimped Wire wheel for my bench grinder. (Made in the U.S.A)

 

[tjmonsen5]

Im impressed by the Streamlight Stylus Pro, its bright! It lights up trees in my yard over 100 feet away, from a sharpie sized flashlight!

 

[cburnscrx]

Craftsman USA deep offset

7 metric and 5 SAE, all USA made

<a href="http://www.flickr.com/photos/cburnscrx/10347476675/" title=><img src="http://farm8.staticflickr.com/7328/10347476675_c4c6d40a77.jpg" width="500" height="374" alt="image"></a>

 

[wittycow]

Fresh off the truck!

 

[Rusty Kustoms]

Did you buy another or both of them together ?

Both together, local hardware store clearance, they are replacing the Homak line with Montezuma. I have $1200 into the set!

 

[Evan(CA)]

New Ingersoll Rand SK34C86 86 piece SAE & metric IMPACT set.

eBay has a seller with an amazing deal on them right now. $186 shipped.

Why in the hell did they not include a 12mm 3/8 drive?! I'm still going to have to pick these up though. oddly enough just yesterday I lost my IR 10mm 1/2 drive shallow impact from a smaller set of these sockets I previously purchased. They've held up great so for 185 shipped for a damn near complete set I'll have to jump on it.

Just bought them for 175.94 shipped

http://www.ebay.com/itm/130659285252

Time to go list the old IR 1/2 shallow impact set and the 3/8 Snap On shallow set in the classifieds

 

[3xpendable]

GREENNESS

For less than a Williams i get some snap on green. Got it from one of our own mr jethro29. The guy has got his stuff together was a real joy to work with great packing fast shipping and keep in contact with me every step of the way. I could not be happier. Thanks Again Jeff

This is just a husky wrench I got from eBay to compleat my first husky set well the wrenches any way still hunting two 1/2 sockets


Sent from under an open range fifth wheel 8p