Show your new tool arrivals

[joel63]

Mastercraft Maximum 30 piece wrench set

Long Shaft
SAE: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/8"
Metric: 6, 7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm

Picked them up yesterday. The set was on special 2 weeks ago for $49.99 (reduced from $124.99). Went to buy a set then, but the Canadian Tire store couldn't find any of the 4 sets the computer system said they had in stock. Walked out with a rain check instead.

Comparing them to the standard and short length Stanley wrenches that I bought 2 months ago, it does look like they came out of the same factory in China, but the polished chrome and overall finish makes them feel and look much nicer than the black chrome Stanleys.

Just a suggestion, pick up the 1 1/16 and the 20 and 24 mm, and you will quite set for sizes.

 

[James_B]

Just a suggestion, pick up the 1 1/16 and the 20 and 24 mm, and you will quite set for sizes.

Got them flagged in my watch list, but at their regular prices (1 1/16"=$23.49, 20 mm=$16.99, and 24 mm=$21.99), they're not something I'll buy until they go on special.

 

[wittycow]

I just grabbed these off the Mac truck. Actually very excited about these, USA made and made right here in South Carolina! Normally I am not crazy about COO, but if I afford too and find what i want, I will always buy American. I think the youtube video sold me on them, plus there on sale!

 

[Jas29]

Bought some cheap drill bits from canadian tire

http://www.canadiantire.ca/en/pdp/tools-hardware/power-tools-accessories/drills/drill-bits-sets-accessories/mastercraft-230-piece-titanium-coated-drill-bit-set-0543692p.html#.Up01c9JDtZg

 

[genevabuck]

I just grabbed these off the Mac truck. Actually very excited about these, USA made and made right here in South Carolina! Normally I am not crazy about COO, but if I afford too and find what i want, I will always buy American. I think the youtube video sold me on them, plus there on sale!

I have been drooling over those since I saw them on the truck.

 

[SignedUpJustToSeeThePics]

Picked up an old craftsman dowelling jig still in the box for $10 at my local thrift shop.

 

[MAYOR28]

Picked up this little guy for $15 on Black Friday:

And got this last week when Woot.com had them for $19.99:

I really like the ratcheting mechanism. So smooth.......

 

[NUTTSGT]

How much were they on BF?

$3.49 for the two pack / all sizes.

 

[Nanashi]

I just grabbed these off the Mac truck. Actually very excited about these, USA made and made right here in South Carolina! Normally I am not crazy about COO, but if I afford too and find what i want, I will always buy American. I think the youtube video sold me on them, plus there on sale!

Nice video actually. I thought they looked like snap on knock offs but the video does a great job proving otherwise.

 

[Brownsfan]

vampires havent used them yet

You won't use those crimpers too often. But when you do you will be happy you bought them. Used mine this weekend working in the door boot of a jeep Cherokee. Made life just a little easier.

 

[bry@n]

I've never seen crimpers like that. Kinda cool.

 

[Bill Ramsey]

Picked up an old craftsman dowelling jig still in the box for $10 at my local thrift shop.

Sweet!

 

[cyato]

vampires havent used them yet

I used my Vampires a little while back removing a broken tap. i was very happy to have invested in them.

 

[peterbilr98]

Gave my son my old Blue Point allen wrench "T" handles and purchased some new Snap-On ball style "T" handles. Made a rack to hang them above my workbench on Saturday.

Mike.

Metrics still in the package.

Hanging above the workbench in their new aluminum storage rack.

those snap ons are nice

 

[zkling]

vampires havent used them yet

When you do can you please post a review? I've never seen those, looked them up and they look SUPER handy for screw heads. Are there any competitive products or is that it?

$3.49 for the two pack / all sizes.

Good deal.

 

[Lexus]

Ko-Ken 1/4 Zeal set:

 

[Firestarter Fred]

Made in Japan, how cool is that?! They look really nice. I am digging that hand spinner, and them stickers are cool too! Nice.

 

[lilredex]

Bought some cheap drill bits from canadian tire

http://www.canadiantire.ca/en/pdp/tools-hardware/power-tools-accessories/drills/drill-bits-sets-accessories/mastercraft-230-piece-titanium-coated-drill-bit-set-0543692p.html#.Up01c9JDtZg

Have those too, and they a really quite good for the $$.

 

[arms1970]

Picked up an old craftsman dowelling jig still in the box for $10 at my local thrift shop.

VERY Nice score there

 

[Stooge]

treated myself to some new Tillman mig gloves last night since some of the fingers tips were losing material and some of the leather had shrunk from heat. they didnt have any of the 52's with the cushiony pads in the palm but the 50's do just fine. i'll keep the old ones for grinding duty so i dont burn the new ones up too quickly

 

[jdcompman]

I just grabbed these off the Mac truck. Actually very excited about these, USA made and made right here in South Carolina! Normally I am not crazy about COO, but if I afford too and find what i want, I will always buy American. I think the youtube video sold me on them, plus there on sale!

Very cool and very well done video!

 

[heavyop]

This is what i got from the Mac truck in the past few weeks. Still have to set up the tool tray. I will have all the tools to set valve lash, replace spark plugs, or remove most heads on large natural gas engines. I'm waiting on the socket rails I will be riveting to the bottom and magnet rails for the side, they should be here later this week.

 

[NUTTSGT]

We had a couple of broken nozzles at the FD, one with a broken bale and another that was cracked. Since all the small punches at the FD are ****, I decided to buy one. Unfortunately, our Hometown Sears doesn't have singles so I had to buy a set. That's okay, I'll divide them up between the truck tool bag, track box and my regular tool box.

 

[skulldrinker]

Been wanting one of these for a while. Finally got it from the truck yesterday.

Sent from my SGH-T759 using Tapatalk 2

 

[Subyroo651]

Been wanting one of these for a while. Finally got it from the truck yesterday.

Sent from my SGH-T759 using Tapatalk 2

I love mine, it hurts that its double the price of the Lisle one but hey I got to trade towards it

 

[nmk_61802]

vampires havent used them yet

More info on who makes that crimper please

 

[Fedwrench]

I have been drooling over those since I saw them on the truck.

YOU ****!!!

Proto had their version of that screwdriver/nutdriver online and in last year's catalog and they're still not out. I'm going to have to break down and call MAC Tools. Nice set

 

[zmotorsports]

Very cool and very well done video!

Nice looking screwdrivers. WOW, I haven't seen a MAC truck in my area in over 10 years. Didn't know they still were selling out of trucks.

Mike.

 

[rider9195]

Picked these odds and ends today.

 

[James_B]

Bought some cheap drill bits from canadian tire

http://www.canadiantire.ca/en/pdp/tools-hardware/power-tools-accessories/drills/drill-bits-sets-accessories/mastercraft-230-piece-titanium-coated-drill-bit-set-0543692p.html#.Up01c9JDtZg

Have those too, and they a really quite good for the $$.

Picked up one of those sets on special a couple of years ago. Still going strong. Saves me getting out the good drill bits for a less than elegant, quick and dirty kludge job.

 

[NC-Shaun]

Picked up one of these Craftsman Lighted Inspection Mirrors Today. Made in USA

http://www.sears.com/craftsman-ligh...p-00945047000P?prdNo=1&blockNo=1&blockType=G1

 

[Brownsfan]

More info on who makes that crimper please

They are branded OTC. I don't know who actually made them. I bought mine from my Cornwell guy before he went under. They are called OTC crimp-well I believe. OTC-5912 is the part number. And MADE IN USA

 

[scaron]

^^ a few items from zoro, proto torx drivers (anyone know where i can find a T25?) and a pin punch.

 

[MJB24]

YOU ****!!!

Proto had their version of that screwdriver/nutdriver online and in last year's catalog and they're still not out. I'm going to have to break down and call MAC Tools. Nice set

I actually got an email about some new Proto items from Grainger today. I was looking at the nut drivers. Part numbers are 13G278 and 13G279, and they show in stock. I seen that type screwdriver as well. The are all ready for tethers. Screwdriver sets are part# 24AK63 and 24AK56

They also have a whole new line of tethered Proto tools as well. not cheap at all for the tethering though.

 

[Fedwrench]

I actually got an email about some new Proto items from Grainger today. I was looking at the nut drivers. Part numbers are 13G278 and 13G279, and they show in stock. I seen that type screwdriver as well. The are all ready for tethers. Screwdriver sets are part# 24AK63 and 24AK56

They also have a whole new line of tethered Proto tools as well. not cheap at all for the tethering though.

Yeah I saw the teathered version. I don't need teathering. MSC has the two stubby screwdrivers listed and a couple of square tipped screwdrivers. Maybe Proto is giving MAC some lead time with their new screwdrivers before releasing their version. I like the looks of the new screwdrivers though and although I don't need any screwdrivers, I want that set.

 

[SliderXTM]

My new Hazet impact driver arrived today. Looks good.

 

[djwyman]

My shipment I received today. The sr80a 1/2" ratchet s8 universal and 6 piece screwdriver set.

Sent from my Nexus 4 using Tapatalk

 

[Heavy Metal Doctor]

today's visit from the tool truck got me this:

 

[Exceller8]

HMD, it's against the GJ code to have orange and green Snap-On tools in the same picture.

Nice score!!

 

[Caparris]

HMD, it's against the GJ code to have orange and green Snap-On tools in the same picture.

Nice score!!

Exactly, so please ship that ratchet on to me please