Show your new tool arrivals

[warmpancakes]

Now see I would have pulled the trigger for that. Was it in the hot tools?

Nope weekly thing used to be 99 but went up to 119 and better stuff

 

[Revere Cycles]

Here's some of the tools I picked up in the last month or so:

The Fuller pliers, Allen USA 3/8" quick release ratchet, and Williams diagonal pliers cost me 25 cents each. The Chicago Pneumatic Impact Wrench I got for a few bucks and the Craftsman grinder came from my grandfather.

I took the opportunity to clean the grinder last night with some CLR, I wanted to bring back the chrome striped panel in the center. I included a shot of my new flat file which may or may not have a home in my shop. It was so heavy that we had to take out all the drawers just to load it into my Volvo. I can't remember the last time I had to do that!

 

[atwageman]

Tekton metric angle wrench set. The finish isn't too bad for China.

 

[wchamberlain]

Not a tool, but something that means something more to me than any tool!

 

[nuklbstr83]

finally had some $ to buy stuff i've been borrowing from co-workers. they'll b happy.

 

[nuklbstr83]

more stuff.

 

[Hopalong604]

Nice grab^^ I need a set of those extra long box end ratcheting wrench

 

[nuklbstr83]

Neat,those MATCO angle wrenches look like the older Bonney sourced wrenches from years past.Were those new off the truck?

i actually got them online, save about 40$ instead of truck. coo usa


those ratcheting wrenches are sweet. i'm so glad to be done borrowing them on a daily basis.

 

[NPOD3]

Brought these goodies home this week:



The flex wrenches are $19 at HD ($17 if you're AD and have your ID). The X-Beams were a bit hrader to find, but they came in the mail this week. $42 for them (that includes shipping) off of eBay. So $59 for both, I am not complaining!

Unfortunately, the seller on eBay has no more of these or I'd link him - sorry guys =/.

 

[Brownsfan]

Nope weekly thing used to be 99 but went up to 119 and better stuff

Is it something your dealer only does? Or like a national promo? I would ask my driver but don't want to piss him off or something. If it's a national thing he usually participates

 

[Twenty20mike]

Not a tool, but something that means something more to me than any tool!

Thank you for your service.

 

[Brownsfan]

Not a tool, but something that means something more to me than any tool!

I salute you sir.

 

[bobemmerich]

Not a tool, but something that means something more to me than any tool!

Agreed! Can't argue with that at all...Anyone who does, is an @#$##%%#@*&&%!

 

[Moose-LandTran]

Not a tool, but something that means something more to me than any tool!

More awesome than any tool!

Many recent purchases/arrivals..



Special terminal release tools from VW. For Micro Timer II, Junion Power Timer and Maxi Power Timer.





Two Streamlight Survivors. The orange one for me and the yellow for a friend:



Led flashing light heads & controller:



I have 8 LED heads in my flashing lights running off one controller. With this controller now i can split them front/rear and still have them sync'd. So when towing i don't blind the car behind and when dealing with broken down cars i don't blind oncoming traffic.

More to follow.. Sorry for the huge pics. Photobucket seems to have stopped my 800x600 limit. Grrr.

 

[jsa83]

Just got the cordless ratchet and screw gun yesterday.... I left my screw gun in a customers car. Snap on dealer was able to find a green one for me.

 

[atwageman]

My 5/8 magnetic spark plug socket grew legs. Picked up a new one at Auto Zone. COO Taiwan.

 

[DeliveryGuy]

Here's my Williams 8 piece screwdriver set. I couldn't bring myself to by Snap On, since these are only $46 on Amazon. I love these handles!
<a href="http://imgur.com/rqwcTVi"><img src="http://i.imgur.com/rqwcTVi.jpg" title="Hosted by imgur.com"/></a>

Snap On square screwdriver set, Klein 1/4" and 5/16" magnetic nut drivers, and a Gray Canada 1/2" ratchet.
Evan though they are not a high tooth count ratchet, Gray ratchets are smooth, and feel like a rifle bolt with every click. My 3/8" Gray ratchet has almost no black lash once the pawl engages the next tooth. This 1/2" one has some back lash, but it is twice the size.
<a href="http://imgur.com/n6vTCCF"><img src="http://i.imgur.com/n6vTCCF.jpg" title="Hosted by imgur.com"/></a>

 

[wchamberlain]

Almost have all the Knipex I want/need.....Just gotta get the 8 piece snap ring pliers set.

If you have never used chads tool box...........Get on board, great prices, fast shipping, great experience, Had the blue point strippers for a minute though

 

[Burgerkong]

Whoaaaaa, a sea of red invading my blue (ignore the price tags, I got them for free)!

 

[jeffmoss26]

Do you have the mini cable cutters and cobolt mini bolt cutters? you NEED THEM!
Continuing the Knipex trend, these arrived yesterday from HJE:

 

[Duarte]

Klein needle nose pliers, EZ Red Kiwi pliers set, SK trim removal set.

$34.99 with coupon

Long metric hex bit sockets

 

[SS5150]

Just got the cordless ratchet and screw gun yesterday.... I left my screw gun in a customers car. Snap on dealer was able to find a green one for me.

Is that a 7.2 screw gun, or is there one available that uses the same battery as the ratchet?

 

[HDMac07]

^^ The 7.2v Screw-Gun will accept the 14.4v battery, but not vice-versa. Crazy good runtime with the larger batteries and in my opinion there is no comparison between the Snap-On cordless ratchet and anything else on the market. It took me several weeks to convince myself to pick one up, but I have zero buyers remorse after pulling the trigger. I only weigh ~175 but this thing can handle me using my body weight and jerking on it not-so-gently and just keep on going. I have the 3/8" and will be adding the 1/4" to the box sometime after Christmas.

 

[Aquaticbob]

Just got this Lincoln handy mig welder to learn welding

Also bought a gear wrench 120xp 3/8" which I'm liking so far

 

[Hyster Gareth]

Nice haul love the Gray ratchet.

Here's my Williams 8 piece screwdriver set. I couldn't bring myself to by Snap On, since these are only $46 on Amazon. I love these handles!
<a href="http://imgur.com/rqwcTVi"><img src="http://i.imgur.com/rqwcTVi.jpg" title="Hosted by imgur.com"/></a>

Snap On square screwdriver set, Klein 1/4" and 5/16" magnetic nut drivers, and a Gray Canada 1/2" ratchet.
Evan though they are not a high tooth count ratchet, Gray ratchets are smooth, and feel like a rifle bolt with every click. My 3/8" Gray ratchet has almost no black lash once the pawl engages the next tooth. This 1/2" one has some back lash, but it is twice the size.
<a href="http://imgur.com/n6vTCCF"><img src="http://i.imgur.com/n6vTCCF.jpg" title="Hosted by imgur.com"/></a>

 

[Chadwilliam1]

 

[SliderXTM]

Würth calendar and Carolus 1/2" nuts

Gesendet von meinem GT-I8190 mit Tapatalk

 

[Tundra]

 

[priceman1414]

Stuff from Menards:

- Torx Socket set (t10 thru t50)
- T47, T55, T60 Torx
- No. 1 phillips, standard length and stubby
- Metric and SAE flare nut wrench sets
- 1-1/8" socket
- 9mm deep socket
- 5/8" spark plug socket

All US made.

 

[atwageman]

SK 86040 long pattern metric set. 8-19mm. From ToolTopia.

 

[O RLY]

Gearwrench 3/8 set with 120xp ratchet.

 

[archirelic]

Well finally uploading some pics of some items I've picked up in the last 4-6 months. Still got more stuff, but haven't gotten around to snapping additional pics.

 

[The Ratchet Man]

Well finally uploading some pics of some items I've picked up in the last 4-6 months. Still got more stuff, but haven't gotten around to snapping additional pics.

Nice table. I'm still waiting for the proper piece of plate steel to cross me so I can build mine. Is that 1/2" plate? Estimated weight?

 

[gtlaw]

got some m12 Milwaukee stuff

 

[HellaFab]

New belt sander.

 

[jrodc455]

http://www.ebay.com/itm/Vintage-new...cKSkWaG%2F1ok1xPtOYJY%3D&orig_cvip=true&rt=nc

I bought this old HF tap and die on ebay lol. Anyone know how ****** these actually are? It says made in japan, but not sure if that's any kind of positive or not.

 

[archirelic]

A couple more pics of the metal workbench I picked up off CL.

 

[Hopalong604]

So the snap on guy walks in our shop and sees me using another brand (it shall remain nameless) impact driver. Let me try his and I was instantly sold. Plus I bought a set of swivel 3/8 sockets and a set of of deep 3/8 sockets.

 

[amlv20]

Did you get that impact hammer on special? I got the same one on special last month for a price I couldn't refuse, glad I didn't cause it's awesome!

 

[Hopalong604]

Ya it's was on special. I NEVER buy anything from SO that's not on sale or some kind of deal or throw ins. I just recently moved jobs and only been dealing with this dealer for a month. Seems eager for my business and gave me an insane deal for all 3 items.