Show your new tool arrivals

[Blown V2]

Some fresh off the truck, some from last month. Not so cheap in Oz so a little at a time

New pliers and spring clamp pliers.


Swapped a 3/8 head into a THLF72. Waiting for a new handle on the 1/4 one under warranty.


Magnetic sockets and adjustable tap sockets.

 

[jim1987]

I understand the use of the magnetic sockets, but they look awful shallow up top? Are they spring loaded?

 

[90zcar]

Some fresh off the truck, some from last month. Not so cheap in Oz so a little at a time



New pliers and spring clamp pliers.





Swapped a 3/8 head into a THLF72. Waiting for a new handle on the 1/4 one under warranty.





Magnetic sockets and adjustable tap sockets.

What is the part number on those straight long needle nose


Sent from my iPhone using Tapatalk

 

[rharman]

I must try that air hose

I'll do a review on it tomorrow after I use it Seems to be pretty nice so far.

That is what I use. They work best if you have something to spool them on, but they are a joy to use.

I'll second that. Those hoses are great. I don't NEED another but I may get one if/when I see a deal on them.

 

[cotjocky]

What is the part number on those straight long needle nose


Sent from my iPhone using Tapatalk

You can see it in the pic. 911CP

 

[turdferguson13]

I understand the use of the magnetic sockets, but they look awful shallow up top? Are they spring loaded?

Yes those deep magnetic sockets are spring loaded.

 

[90zcar]

You can see it in the pic. 911CP

Well obviously I couldn't make it out that's why I asked...
Thank you


Sent from my iPhone using Tapatalk

 

[Antique Engine]

Whats the part number on that ratchet? That's a nice looking piece!

It's a J.H. Williams M-52EHFA. I'm sure you're familiar with the SnapOn/ J.H. Williams relationship. So far, I'm very pleased with all of the US made Williams tools I've bought.

I got it from Toolsource for 27.00.

http://www.toolsource.com/inch-drive-chrome-finish-flex-head-ratchet-p-126316.html

 

[GTA Matt]

It's a J.H. Williams M-52EHFA. I'm sure you're familiar with the SnapOn/ J.H. Williams relationship. So far, I'm very pleased with all of the US made Williams tools I've bought.

I got it from Toolsource for 27.00.

http://www.toolsource.com/inch-drive-chrome-finish-flex-head-ratchet-p-126316.html

Thank you sir!

 

[Tech89]

Matco's ADV 3/8 drive impact sockets. 7mm to 19mm. Still waiting for the tool guy to get the deepwells in. So far they are nice. Great price too.

-Pat

sent from somewhere in Minnesota...

 

[SliderXTM]

My first SnapOn tool arrived today!
75 Years Snap On Edition

 

[arms1970]

Matco's ADV 3/8 drive impact sockets. 7mm to 19mm. Still waiting for the tool guy to get the deepwells in. So far they are nice. Great price too.

-Pat

sent from somewhere in Minnesota...

Nice large laser marking. Most are horrible to see.

 

[Deskmechanic]

It's a J.H. Williams M-52EHFA. I'm sure you're familiar with the SnapOn/ J.H. Williams relationship. So far, I'm very pleased with all of the US made Williams tools I've bought.

I got it from Toolsource for 27.00.

http://www.toolsource.com/inch-drive-chrome-finish-flex-head-ratchet-p-126316.html

I've had that on my wish list for a while. My favorite 3/8 ratchets are that style.

 

[AndrewH]

Came in yesterday...

 

[hugos]

Came in yesterday...

You are one lucky dude! I also think Wera makes some of the best tools available today, however in South Africa we cannot find them anymore. Only the Orange plastic handle screwdrivers are manufactured here under license. Wera stopped importing all the nice tools from Europe. So, if you are in South africa and you have some of the "good" stuff, consider yourself lucky. Such a pity, anyway, enjoy your new tools.


Sent from my iPad using Tapatalk HD

 

[jpcole3.1]

Hello everyone. Long time lurker, figured I would post some new acquisitions.

1. Craftsman Tappet wrench set. New from Sears, made in USA.
2. Craftsman feeler gage set. New from Sears, only the two round plug gages are marked made in the USA.
3. Craftsman 18mm and 3/4" spark plug socket. New from Sears, made in USA.
4. Craftsman 20pc ignition wrench set. New from Sears, case has a made in USA tag sewn on, but the wrenches are not marked in any way. I know some of the vintage sets have the -v- mark, but these do not.
5. Armstrong 7pc SAE and 10pc Metric double box, ratcheting end, full polish wrenches. WOW these are nice wrenches, puts my craftsman raised panels to shame. I am definitely digging the full polish and the extra length that these have. Bought these used off of auction site, they are practically brand new.
6. Not pictured: Craftsman Industrial 21pc SAE/MM, 3/8 drive crowfoot wrench set. New from Summit, all marked made in USA. Also picked up Craftsman Industrial extensions in 6" and 10" in both 3/8 drive and 1/2 drive.

 

[Tech89]

Nice large laser marking. Most are horrible to see.

Yes, very easy to read. Even when dirty.

-Pat

sent from somewhere in Minnesota...

 

[fhemm20]

Scored this new in the box CNH branded 3/8" air ratchet for $35. I took a chance on it not knowing who makes it. Opened open the paperwork, in big letters it says "contact snap-on industrial for repair parts".

Found the exact same bluepoint version here:
http://buy1.snapon.com/catalog/item...roup_ID=675143&store=snapon-store&dir=catalog



Sent from my SAMSUNG-SGH-I847 using Tapatalk 2

 

[Travisnd]

Hello everyone. Long time lurker, figured I would post some new acquisitions.
new.
6. Not pictured: Craftsman Industrial 21pc SAE/MM, 3/8 drive crowfoot wrench set. New from Summit, all marked made in USA. Also picked up Craftsman Industrial extensions in 6" and 10" in both 3/8 drive and 1/2 drive.

Let's see some pictures of this!!

 

[99blaze]

Picked up this cart for work cheap... kinda flimsy but it works

Sent from my DROID RAZR using Tapatalk

 

[GTA Matt]

Todays haul, another member gave me a heads up on some sockets I was missing to fill in some empties on my Hanson trays off ebay. Armstrong brand. Also from ebay, a 14mm blue point wrench to replace mine that grew legs. And alignment tools/seal installers for oil pump and front and rear covers for GM LS motors.

 

[bahcoswed]

milwaukee m18 impact driver! Get it for 999kr (like 90-100 euro) completely new with a case, charger and battery!


Skickas från min iPhone via Tapatalk

 

[bahcoswed]

the beginning of my milwaukee 18v tools!


Skickas från min iPhone via Tapatalk

 

[shopboy13]

milwaukee m18 impact driver! Get it for 999kr (like 90-100 euro) completely new with a case, charger and battery!


Skickas från min iPhone via Tapatalk

Where'd you get it?????


Sent from my iPhone using Tapatalk

 

[bahcoswed]

Where'd you get it?????


Sent from my iPhone using Tapatalk

On the local hardware store in northern sweden Sorry no online ordering I get it cheap because its missing 1 battery and the store has a campain on them! I doesnt need battery or charger...allready has a bunch of them!

 

[Ruger_556]

Parker HF series USA made air couplers... No more **** chinese couplers for me.



Stant gauge and adapter with a Parker regulator and valve makes for easy work.



Matco 3/4 drive 33mm and 1 1/2 x 13/16, driveline socket, and 1/2 drive 1 5/16.

 

[jsharpphoto]

Yesterday i got my air tool rack in the mail from JEGS. This thing is awesome. I used the rubber caps from harbor freight ($1 for a 5 pack) since the quick connects point up. Screwed it into the side of my workbench top with 3 inch long screws, and it's strong enough to stand on. For $22 shipped, I'd highly recommend it. Completely freed up a drawer in my tool chest.

Might not be great for working shops where things might walk away, but for a home garage it is the dogs nuts.

 

[rmsg0040]

 

[BlksnshN]

Just off the truck this afternoon. Was supposed to get the Green drill too but the driver is having problems getting one.

https://scontent-a-ord.**.fbcdn.net/hphotos-frc3/t1/1239651_772585106086579_1822801170_n.jpg

 

[AndrewH]

Just came in today, along with half an order from Zoro but I'll save those til tomorrow when the other half shows up!

 

[nickjj]

Ordered on Sunday, arrived in UK by Thursday, and only £15 delivery charge:

 

[chiz1180]

Was in a tight spot and needed a few things



chiz1180

 

[rshadd]

I picked up some goodies during the Zoro Tools 30% flash sale on Tuesday...

Proto Needle Nose Long Reach Pliers (J240G & J241G) - $23.60 $23.30

3M Scotch-Brite Hand Pads (Maroon) - $.70/each

3M Scotch Black Duct Tape - $6.10

3M Scotch Super 88 Electrical Tape - $3.21

And from the recent Sears SYWR $10 surprise points..

As much as I'd like a full set of swivel impacts I just can't justify to cost for as little as I'll use them, so I got this Craftsman 1/2" drive Impact Universal Joint ($16.19) to hold me over.

I also grabbed this Craftsman 14 Pocket Wrench Roll ($9.99) for my extra 14pc set a Craftsman Industrials.

 

[upgrading]

Proto Needle Nose Long Reach Pliers (J240G & J241G) - $23.60 $23.30

Those look good.

 

[zkling]

Those look good.

Proto makes some really nice pliers IMHO, not the cheapest, but a nice pair of pliers.

 

[HalfFlip]

Just got the last part of my order from Levelchrome today so I figured id throw up the whole lot. And I must say that dealing with Alan was an absolute pleasure!

Also picked up this Rupes polisher from Detailersdomain in Feb. Another amazing business with a great guy behind it

 

[Chadwilliam1]

Sk 3/8 8 piece wobble extension set.

9/16 nut driver

Sent from my HTC Rezound using tapatalk.

 

[zkling]

What's the model number on the potato?

 

[devoncoolman]

What's the model number on the potato?

That looks to be a snap-on potato. My guess is the part number is potato1. I believe a discontinued product because the shelf life sucked.

 

[imom]

Halfflip...are you a detailer? Nice big foot. I hear that's the new polisher to use these days...I had it done on my car. I see you also have some studio monitors there...but deduct points for using a MAC