Show your new tool arrivals

[Ruger_556]

That looks to be a snap-on potato. My guess is the part number is potato1. I believe a discontinued product because the shelf life sucked.

I dunno that looks like the rev. A edition potato right there

 

[Travisnd]

Got these Craftsman Industrial deep offset wrenches Made In USA today to go along with a few I already had!




Only 3 more wrenches to get left to complete both sets! They will be ordered this weekend!!

 

[Bryanthegreat]

Ordered a new M18 fuel 3/8 impact.

 

[HalfFlip]

Halfflip...are you a detailer? Nice big foot. I hear that's the new polisher to use these days...I had it done on my car. I see you also have some studio monitors there...but deduct points for using a MAC

Not a professional, just like to keep my car clean. Its just as important as keeping it mechanically maintained

I had always wanted a polisher to take out the swirls that slowly have accumulated over the years on my car and recently my headlights have shown signs of hazing up, so I figured I would finally buy myself a Rupes since it was new. Just waiting for end of the rainy season to try it out

And as for the apple keyboard...its connected to this rig that I finished last week! Im waiting for the new gtx870 to come out ...I will admit that I do have a macbook air though lol

 

[ADSR]

Ordered a new M18 fuel 3/8 impact.

Well done!

Enjoy the power

 

[Ruger_556]

Broke down and ordered a set of Snap-On angle wrenches up to 1" the other day.

 

[Chris_L]

Bought a Long Pattern SK Metric Wrench Roll 6-24mm for home. My other box is mostly matco wrenches with a little snapon sprinkled in, they seem much thinner than the sk's in comparison. We will see how I like the sk's with use. They are definitely well made, and I like the aesthetics. If I like them I'll probably get one of the big standard rolls too.

 

[Fourtraxer]

Just came in today, along with half an order from Zoro but I'll save those til tomorrow when the other half shows up!

Love my Wera's, you're gonna love them!

 

[Mr.3-5-7]

Finally got my prybars. Ive been using second-handers given to me by my uncle.


Untitled by gjktaylor, on Flickr

 

[Seiler]

Dewalt DW872 dry cut saw, metal and casters for welding table build.


DSC_3944 by The Color Orange, on Flickr

 

[Dara]

Dewalt DW872 dry cut saw, metal and casters for welding table build.


DSC_3944 by The Color Orange, on Flickr

theyre a great saw...i have 110v one for the last year and a half for mobile repair work
and i love it

 

[cotjocky]

Those look good.

Those look exactly like the Mac set I bought back around 2003. My set had 1 more pair than yours. Straight, 45 and 90 degree.

They have been handy more times than I can count. You will love them!

 

[nmcqueen469]

Also picked up this Rupes polisher from Detailersdomain in Feb. Another amazing business with a great guy behind it

Phil is the man, indeed!

Is the Rupes your first machine, or is an upgrade for you?

 

[jpcole3.1]

Let's see some pictures of this!!

No problem. 21pc Craftsman Industrial crowfoot wrench set, new from Summit. Also from Summit, a couple Craftsman Industrial extensions. The 1/4" drive, 10" long extension is Armstrong brand I purchased through Sears. I wanted a 3", 6", and 10" extension in all three drive sizes and with these additions I have them. I'm adding to a Craftsman tool set I purchased back in 2010.

Also, based on recommendations from this awesome site, I bought the three piece set of long reach pliers from the auction site. Awesome pliers!

 

[Hpozzuoli]

Bought a Long Pattern SK Metric Wrench Roll 6-24mm for home. My other box is mostly matco wrenches with a little snapon sprinkled in, they seem much thinner than the sk's in comparison. We will see how I like the sk's with use. They are definitely well made, and I like the aesthetics. If I like them I'll probably get one of the big standard rolls too.

You have done well. Get the sae's next

 

[Hpozzuoli]

Finally got my prybars. Ive been using second-handers given to me by my uncle.


Untitled by gjktaylor, on Flickr

I just got the same set. I haven't used them yet.

 

[SC-AW11]

No problem. 21pc Craftsman Industrial crowfoot wrench set, new from Summit. Also from Summit, a couple Craftsman Industrial extensions. The 1/4" drive, 10" long extension is Armstrong brand I purchased through Sears. I wanted a 3", 6", and 10" extension in all three drive sizes and with these additions I have them. I'm adding to a Craftsman tool set I purchased back in 2010.

Also, based on recommendations from this awesome site, I bought the three piece set of long reach pliers from the auction site. Awesome pliers!

Which auction site? I want those green angled pliers. What brand are they?

 

[kiatech]

Which auction site? I want those green angled pliers. What brand are they?

Take a guess

 

[trpearcy]

-3-6 inch oil filter wrench
-1/2 drive adjustable oil filter wrench
-Valve stem removal tool
-Mirror
-Strait neck tire gauge
-Strait neck tire chuck
-o ring pick
-Cornwell Metric Hex Socket set
-o ring assortment

 

[cassidy]

Cornwell extended torx

Sent from my XT1080 using Tapatalk

 

[AndrewH]

The rest of my Zoro shipment showed up! Mayhew Dominator Straight and Curved Pry Bar sets!

 

[billp603]

Which auction site? I want those green angled pliers. What brand are they?

http://www.ebay.com/sch/Tools-/631/...4&pt=Pliers&hash=item1c19e3d0d8&_ssn=ojdiaz55

Pliers are Blackhawk (Proto, US made) They have several combinations of sets with 2 or 3 in a set. I also have the green ones and Orange ones, they are both nice.

 

[fhemm20]

Finally got my prybars. Ive been using second-handers given to me by my uncle.


Untitled by gjktaylor, on Flickr

I've had that set for over 10 years now, has served me very well

Sent from my SAMSUNG-SGH-I847 using Tapatalk 2

 

[pepi]

UPS dropped these yesterday.

 

[HalfFlip]

Phil is the man, indeed!

Is the Rupes your first machine, or is an upgrade for you?

Rupes is my first machine. I first got interested in detailing when the pc 7424xp was the favored beginner machine. After being away from the community for a bit, I came back and learned about the Rupes. It seemed perfect cause it took the ease of use of the pc/griots and gave it much more correcting ability.

 

[spoonsports86]

 

[jnolla]

 

[rmsg0040]

^^ those pictures are really clean!

 

[99blaze]

Gm/ford screw in oil funnel and 8qt oil jug with detached funnel

Sent from my DROID RAZR using Tapatalk

 

[KaHuNaZ]

a few new tools.

 

[rmsg0040]

Picked up this starrett 818 automatic center punch, knurling is very nice, the tip is beefy, and hits harder compared to my no-name cheapie

 

[G1GRANDEUR]

cool, I have been looking for automatic center punch as well. according to description, strike power is adjustable?

 

[mikebramel]

Broke down and ordered a set of Snap-On angle wrenches up to 1" the other day.

The price is hard at first but after you need them it will be long forgottten

 

[Deskmechanic]

Finally got my M18 fuel 3/8 impact. I love this thing. Already threw away the case and used it to finish dissembling a door, so unfortunately no clean shots.

 

[Ruger_556]

The price is hard at first but after you need them it will be long forgottten

$500 for everything.

 

[just a noob]

Which auction site? I want those green angled pliers. What brand are they?

proto

 

[woodstockva]

Tekton 4883 Metric Deep Impact Socket Set - 10mm-24mm w/no sizes skipped

 

[rmsg0040]

cool, I have been looking for automatic center punch as well. according to description, strike power is adjustable?

yep, it is adjustable

 

[Mxjr12]

What sizes of angle wrenches are not in the package

 

[Ruger_556]

What sizes of angle wrenches are not in the package

13/16 through 1"