Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
JustinsGr8
Well-known member
JustinsGr8
Well-known member
It's here finally...
Is this the 1/4 or 3/8
I like how compact it is. I have a Ingersoll but it more so the size of a drill.
Congrats.....
Thunderbisciut
Well-known member
My deal of the year so far:
Chicago Pneumatic CP2611 clutched screwdriver in like new condition. Paid $47 shipped for it.
Amazon has the lowest price I've seen for a new one. I wasn't looking for one, and don't need it, but hell if I'm gonna let a deal pass me by.
Chicago Pneumatic CP2611 clutched screwdriver in like new condition. Paid $47 shipped for it.
Amazon has the lowest price I've seen for a new one. I wasn't looking for one, and don't need it, but hell if I'm gonna let a deal pass me by.
Attachments
GSMotorrad
Well-known member
- Joined
- Mar 8, 2012
- Messages
- 420
Arrived today, and I love it. Never thought I'd ever care about one of these, but this one is the kangaroo's pouch.
My car has 17mm Lug Bolts, Bikes have 15mm and that 3/8" Dr means it fits almost anything!
My car has 17mm Lug Bolts, Bikes have 15mm and that 3/8" Dr means it fits almost anything!
jonathan75
Well-known member
Got some cool stuff when I was out of town last week. That metric hex key set has a magnet at the ball end of each one and a sweet powder coat finish. Not bad for only $18 USD!
The small ratchet set is really going to help me with my work. It included a 1/4" ratchet and a ratchet with a screw bit.
Turns out I can't use the stubby holder and need to find another one. It was worth a shot for $2 but it does not have enough open slots and many are too tight to even fit a wrench in.
The small ratchet set is really going to help me with my work. It included a 1/4" ratchet and a ratchet with a screw bit.
Turns out I can't use the stubby holder and need to find another one. It was worth a shot for $2 but it does not have enough open slots and many are too tight to even fit a wrench in.
Attachments
Last edited:
Travisnd
Well-known member
Some NOS Channellocks to go along with the collection!!
jonathan75
Well-known member
I finally got the Craftsman Stubby set everyone talks about. Had to buy the 22mm separate and just ordered a 9mm. Could not find a 11mm or a 21mm stubby that Craftsman makes. I still need to find a holder for this set. The one I picked up is too tight and not enough slots.
http://www.sears.com/shc/s/p_10153_12605_00934956000P
http://www.sears.com/shc/s/p_10153_12605_00934956000P
Attachments
As 90zcar said, GM fuel filters. The oil cooler lines going into the gm truck radiator is 20mm as well. I've ran into a few VW Aircooled Beetles that the generator nuts are 20mm. There are others, but that is about the extent of my experience with 20mm. Enough that I have a 20mm wrench and 20mm flare crow foot. Need to break down and but a 20mm line wrench, would be more handy for the GM work.
AndrewH
Well-known member
Some NOS Channellocks to go along with the collection!!
Where do people keep finding those Channellock locking pliers!? What's the product number / part number for the set?
Thanks,
Andrew
Travisnd
Well-known member
Ha!
I found them on ebay, been looking for about a month and these popped up and I was the only bidder!!
The part #'s are
100-7
100-10
Stroked383
Well-known member
New snap on mini puller set. And he gave me the coolie cups.
New snap on mini puller set. And he gave me the coolie cups.
Any particular jobs you going to be using that on?
Stroked383
Well-known member
Hoping it will be handy to pop the injectors out of the 1.6s for the recall on the escapes. The big slide hammer the only thing I had that fit and was to bulky/heavy. They don't need much but some seem to stick more than others. We shall see tomorrow I have a stock unit that needs done along with plenty that have yet to be scheduled. We just had a fellow tech leave so it's only the 2 of us SMT and 2 oil changers. Business is picking up and we're keeping up but these recalls are making me work.. Ha
3/8's... It was only on back order for 3 months
geez. I've had one for sale here on the forums for 400 with screw gun, light, and impact
Ahh YESS removing the Eco boost injectors, my shop has a slide hammer but I like the idea of having my own does sound good,does the injector grabbing tool fit the the threads on it?
Why are you removing injectors on the new recall?im on my first one wich is also a stock unit and I havnt read anything yet for removing the injectors?13s12 right? 55 pages and 6.1 hours of ****!
ihateminimumwage
Well-known member
- Joined
- Jan 26, 2012
- Messages
- 3,960
Sell it on CL or throw it away. Going through my storage today, I realize how many junk blow molded cases I've been hauling around 'just in case'. Plenty of stuff went in the trash today (mostly plastic trays and Milwaukee M12 boxes).
upgrading
Well-known member
Good find.Ha!
I found them on ebay, been looking for about a month and these popped up and I was the only bidder!!
The part #'s are
100-7
100-10
Every time I look I only see the 100-10 as part of a set with an adjustable wrench I don't want.
allinon72
Well-known member
Are those Channellock locking pliers made by Grip-On?
Holt
Well-known member
I know its been discussed hereand I'm sureyes they are. Same assnap on whos oemis Grip On.
kazlx
Well-known member
It's a good tool week.
Travisnd
Well-known member
The Ratchet Man
Well-known member
2 Sears orders to maximize sales, points and coupon code stacking.
An ebay purchase. Made in Taiwan.
An ebay purchase. Made in Taiwan.
Audiocrazy28
Well-known member
I'd say so! Good looking stuff.
bodyguy16
Well-known member
A gift from the boss, mixpac gun for 3m adhesives
Picked up today, paired with HF magnetic nutsetters its awesome for engine work
http://www.harborfreight.com/9-piece-metric-uick-change-magnetic-nutsetter-set-68519.html
http://www.harborfreight.com/9-piece-metric-uick-change-magnetic-nutsetter-set-68519.html
Nortonscustom
Well-known member
- Joined
- Jun 5, 2008
- Messages
- 375
New snap on mini puller set. And he gave me the coolie cups.
I've been wanting that puller set for a while now! It's definitely on my list for this year. Who makes that red screwdriver style handled dent puller pictured?
padronanniversary
Well-known member
How much was that puller set ? I've been wanting it too
StackedDodge96
Well-known member
All my tools finally came in!
Snap on line up bars and blue point 1/4 set. Waiting on my thread chasing set.
Off the cornwell truck, Mountain wrenches!
Snap on line up bars and blue point 1/4 set. Waiting on my thread chasing set.
Off the cornwell truck, Mountain wrenches!
chipper
Well-known member
amatouring
Active member
bodyguy16
Well-known member
All my tools finally came in!
Snap on line up bars and blue point 1/4 set. Waiting on my thread chasing set.
Off the cornwell truck, Mountain wrenches!
Let me know how you like those wrenches, and what did they set you back?
2ndGearRubber
Well-known member
All my tools finally came in!
Snap on line up bars and blue point 1/4 set. Waiting on my thread chasing set.
You'll love that 1/4 inch set. I've had the same one for about 4 years. The clam-shell case final broke (tripped over it), but the quality of the tools is top notch. It's my go to under-dash repair kit. Enjoy!
How much was that scanner? What is the model number and brand. Let me know how u like it
Sent from my iPhone using Tapatalk