Show your new tool arrivals

[FOCUS.FREAK]

One of the guy from work was getting rid of his old socket organizers. They were the flat ones like the craftsman with the magnet. I didn't need that big thing in my box, so I drilled out the riv it's and took out the magnet strip. Put it to good use.

Impacts are HF pro deeps. Stamdard. Last socket is tekton 33mm


Sent from my SPH-L720 using Tapatalk

 

[jmscollinsiii]

With the COO this should be a BluePoint truck...

Do you have a part number for that?

 

[skife]

https://scontent-b-ord.**.fbcdn.net/hphotos-frc3/t1.0-9/1534362_10152312879110944_9196038818248643367_n.jpg

matco 88 tooth 3 piece set.
1/4, 3/8, and 1/2 drive.
they are heavy and the 1/4 is awesome for tight areas.

 

[GortonsFisherman]

Gorton's. Where did you pick up the Milwaukee gear?

Home Depot online. Both specials are still running, last I looked.

 

[the.wong.kid]

snapon circuit tester/probe with digital display

 

[Farmall450]

Got my plyworx rack from SO.

[/URL][/IMG]

 

[the.wong.kid]

Got my plyworx rack from SO.

[/URL][/IMG]

nice, what's the dimensions of the rack? i have a krl722, not sure if i have a available drawer for a rack like that height wise

 

[JBradley500]

I went to a moving sale because I have been looking for a pipe wrench and ended up spending 50 bucks. Not sure if it's a good deal or not but whatever. I have some questions at the end of the post.

I picked nine pipe wrenches from ~8"-24". They are USA (stillson, ridgid, ridge?) Germany, and Canada i think (Fuller).

Got the circular saw which is a skillsaw 576 made in the USA. A USA nicholson and sthil file, a big cat's paw, a 50" usa stanley tape, and a weird german spring loaded pipe wrench thing.

On the right there's an Adjust-a-box wrench, a couple of craftsman adjustables, and two proto adjustables. There is a set of 430 and 420 channel locks. I'm not sure about the bolt cutters but they are ~24".

Questions- Is ridge a different company than ridgid? I tried to google it and they appear to be used somewhat interchangeably but i don't know if thats an accident or not.

Anyone know if the bolt cutters are junk by looking at the picture? I didn't give much for them but they don't appear to have a name on them.

 

[GortonsFisherman]

Questions- Is ridge a different company than ridgid? I tried to google it and they appear to be used somewhat interchangeably but i don't know if thats an accident or not.

No, the company name is Ridge Tool Company, and they brand their tools as Ridgid.

 

[Flash69]

Pawn shop find snap on screwdriver bit set couple missing bits, couldn't resist when they said $40

Sent from my iPhone using Tapatalk

That set is fantastic. I have had mine for 20 years and use it all the time! Great find!

 

[94blu1500]

Bought this from my buddy in the shop when he upgraded to a new electronic model. Fresh from 1986.

sent from android mobile

 

[Ruger_556]

I liked the metric set so much I picked up some NAPA Pro SAE swivels and air drill.

 

[theamcaddict]

Sioux srw03s38 made in USA. https://www.whiteheadindustrial.com/p-24764-38-drive-pneumatic-ratchet-wrench-no-srw03s38.aspx

pretty much a snap-on FAR2505 without the chrome.

sent from my Moto X

 

[Ruger_556]

Proto "click-stop" adjustable wrench... So nice

 

[jfcasey]

The previously mentioned clamps

Sent from my iPhone using Tapatalk

 

[isr2kba]

Trying to keep track of my OTC adaptors is like herding cats. I've been wanting this upgrade for a long time. I am very excited.

 

[jim1987]

Guess farmall wasn't joking when he said he has some extra 420s

 

[abvw]

This'll be it for a while, I hope......

 

[Trucky]

I see them stripmasters in there. Best tool ever when you're wiring a lot of things at once.

 

[land]

Figured I buy them straight from the source.

[/URL][/IMG]

[/URL][/IMG]

 

[RX-KING]

After reading at GJ about snap-on and Jh.williams i start i want thata brand..so i go to my friend tools shop.finaly found this

 

[RX-KING]

Uh..please guys give your opinion or your experince about Elora hand tool quality..is good quality or badbecause my ratchet,sliding tee and socket is Elora(w-germany)

 

[ADSR]

This'll be it for a while, I hope......

Lol, I cant afford to buy from blackrock. They have some crazy markups.

 

[RX-KING]

Uh..please guys give your opinion or your experince about Elora hand tool quality..is good quality or badbecause my ratchet,sliding tee and socket is Elora(w-germany)

 

[Hpozzuoli]

I decided I needed a torx bit set that had everything in one spot so I could grab it and go if need be. I grabbed the SK this morning.

 

[gsingh]

You got a part number for that? I'd love to get one.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[rmsg0040]

Got this Hioki multimeter and a bahco plier from ebay, surprised to see the meter was made in japan and the plier made in france:

 

[Stooge]

You got a part number for that? I'd love to get one.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

19763 35 Piece 1/4", 3/8" and 1/2" Drive TORX® Bit Socket SuperSet ive been eyeing that set for awhile now, just rarely deal with torx stuff lately

 

[n8n]

You got a part number for that? I'd love to get one.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

I have that set, I'll look when I get home if nobody's posted first. It doesn't have an e20 though so it it still not complete even with all those bits and sockets...

Sent from my XT897 using Tapatalk

 

[JasonJ]

 

[frugalscotty]

Rec'd my pink MegaPro screwdriver today. Very solid. My only tiny gripe is the complete selection of Roberson (sqr) bits. Not very useful for a general around the home screwdriver. I believe I have needed one exactly once in 50+ years of screw driving



Referenced in this thread http://www.garagejournal.com/forum/showthread.php?t=243033

 

[Hpozzuoli]

you got a part number for that? I'd love to get one.

Sent from my samsung-sgh-i337 using tapatalk

sk-19763

 

[Hpozzuoli]

I have that set, I'll look when I get home if nobody's posted first. It doesn't have an e20 though so it it still not complete even with all those bits and sockets...

Sent from my XT897 using Tapatalk

Only up to E18

 

[90zcar]

Who needs an e20


Sent from my iPhone using Tapatalk

 

[chipper]

Just got some specialty sockets from the mailman

 

[bodyguy16]

Uh..please guys give your opinion or your experince about Elora hand tool quality..is good quality or badbecause my ratchet,sliding tee and socket is Elora(w-germany)

The few ive seen looked good, havent used any thought elora is not very popular around here, dont know many who own some the ones that do brought it back from europe

Just got some specialty sockets from the mailman

What a nice guy! Are those vim?

 

[n8n]

Who needs an e20


Sent from my iPhone using Tapatalk

Someone who needs to do a brake job on a SAAB (btdt)

 

[BRay549]

I picked this 1945 Delta Milwaukee drill press up off of Craig's List yesterday. It was cheaper than the new ones, and much higher quality, IMHO.

The seller also threw in a clamp down device and the pictured router table attachment.

It makes for a great birthday weekend.

 

[90zcar]

Someone who needs to do a brake job on a SAAB (btdt)

Thanks...looks like I need to get an e20 then!
Best to be prepared


Sent from my iPhone using Tapatalk

 

[GSMotorrad]

Just got some specialty sockets from the mailman

Those look nice. Who makes them?