Show your new tool arrivals

[Blown V2]

Teng Tools roll head pry bar set. Catalog price of $89 for those playing in Aus.

Only problem is the tray is too big to fit in my toolbox! (Grr, goes dreaming of a KRL series box...)

 

[woodstockva]

Have you tried this out yet? Curious for one myself.

I've got one.....I can say that it WILL pull VW codes & reset the SRS light.

 

[Askme42]

Nope not at all. For a light beer I enjoy it. Doesn't give me the shits and I don't get headaches like like I do from just about any anheuser Busch product


Sent from my iPhone using Tapatalk

I know many that get headaches from bud products. It's simple though. Switch to millercoors

 

[Jeepster425]

this counts as a tool right??

just got it tonight(the black and blue one)

 

[colin39]

this counts as a tool right??

just got it tonight(the black and blue one)

Hell yea, nice tool.

 

[thesilverone]

New from Cripe

 

[Chadwilliam1]

Sent from my HTC Rezound using tapatalk.

 

[CZ_Greatwrench]

New old stock Cornwell-Allied and wood handle Proto Phillips.
I grew up turning my dad's wood Mac's, this is my first brand new US made wood handle screwdriver... for 2.99, I'm happy!

 

[ecotec]

Jeepster, that is an awesome color combo.

 

[jeffmoss26]

 

[Canadian Charlie]

Have you tried this out yet? Curious for one myself.

It seems they work on 1996 and newer cars, my wife's Audi is a 1995 and I could not find a place to hook up the scanner to under the dash

 

[cgv69]

Milwaukee 2654-22 (3/8" M18 Fuel Impact Wrench) - Northern Tool - $280 shipped + $75 giftcard
Milwaukee 49-16-2754 (M18 FUEL Impact Wrench Protective Boot) - ebay
Sunex 3329 (3/8" Metric Master Impact Set) - Tooltopia
Sunex 320M & 320MD (20mm standard and deep) to fill in the gap - Tooltopia and Amazon
Grey Pneumatic 1100 (3/8'' Impact Adapter & Extension Set) - Tooltopia

 

[Hpozzuoli]

this counts as a tool right??

just got it tonight(the black and blue one)

Didn't you recently get that cornwell box. I remember it because of the cool color combo..

 

[txbonds]

Very nice.

What are those clips on your pegboard holding tools? Never seen those before.

Milwaukee 2654-22 (3/8" M18 Fuel Impact Wrench) - Northern Tool - $280 shipped + $75 giftcard
Milwaukee 49-16-2754 (M18 FUEL Impact Wrench Protective Boot) - ebay
Sunex 3329 (3/8" Metric Master Impact Set) - Tooltopia
Sunex 320M & 320MD (20mm standard and deep) to fill in the gap - Tooltopia and Amazon
Grey Pneumatic 1100 (3/8'' Impact Adapter & Extension Set) - Tooltopia

 

[cgv69]

Very nice.

What are those clips on your pegboard holding tools? Never seen those before.

Talon Hooks (http://www.talonhooks.com/)

 

[Jeepster425]

Didn't you recently get that cornwell box. I remember it because of the cool color combo..

Yeah I got it a little over a year ago, but then I started that thread about what happens if the tool guy doesn't show up, I got fed up with the cornwell guy for showing up whenever the hell he wanted, so now I finally won't have to deal with ******** anymore.

 

[jsharpphoto]

Made in USA hickory handle hammer set. $35 after points

 

[gaffobohs]

Picked up a set of Lisle hose picks and a knipex side cutters. Had some cheap picks but they bent pretty easy so hoping these hold up better! First Knipex purchase and they feel good! Ordered the mini bolt cutters too, can't wait to see what that's like!

Sent from my iPhone using Tapatalk

 

[brit road garage]

Had those knipex cutters for 8 years still going strong


Sent from my iPhone using Tapatalk

 

[Fcvapor05]

60" pry bar from the Zoro Hot Deals thread

3 pairs of Snap-On (grip-on) locking pliers. Got them from the guy for $40 since they had been repo'd. Cleaned 'em up and they look brand new!

 

[greasemonkey44]

You will love the mini bolt cutters; brake lines fear me now

 

[gsingh]

Only drawer that the pliers fit into

 

[gsingh]

From sears. These are my first knipex.

 

[outdoorsman310]

from HJE

 

[treblarefils]

It seems they work on 1996 and newer cars, my wife's Audi is a 1995 and I could not find a place to hook up the scanner to under the dash

These are made for OBDII cars 1996 and newer. Your 1995 is most likely OBDI and there is probably a way you can get codes to flash on the dash by jumping a connector somewhere. Just google it up if you need to.

 

[GTA Matt]

Fresh off the ups truck, load pro, Yukon bearing puller and mayhew ez driver set.

texted while driving recklessly

 

[NorCalWrenchin]

[/URL][/IMG]

Buy the 1/4" extensions for 125, get the T72 free!! Had to do it.

 

[Hpozzuoli]

[/URL][/IMG]

Buy the 1/4" extensions for 125, get the T72 free!! Had to do it.

I almost did that if he had wobbles.

 

[NorCalWrenchin]

I almost did that if he had wobbles.

They are wobbles!

 

[bobbycos]

[/URL][/IMG]

Buy the 1/4" extensions for 125, get the T72 free!! Had to do it.

and i was on the SO truck today looking at that deal



shoulda coulda woulda

 

[NorCalWrenchin]

My driver said the sale's good until next tuesday, but IDK if thats a regional decision or..

 

[DodgeMech]

i got the mg325, FARsomethinorother air ratchet, and deep and short metric and standard 3/8 impact sockets, for 1400 on monday...with a free rifle case...and it's all metallic grey colored

 

[Hpozzuoli]

They are wobbles!

I know. I meant my driver didn't have them. All out.

I could use some decent 1/4 wobbles and to get a ratchet too is a good deal.

 

[Gurp]

Tekton 1947 metric set amazon last week
Blue point vise grips
Chinese man's socket caps and metric crows foot 10-19mm
OEM ignition tester
Great neck 26 blade feeler gauge.
The local tool store good finds for cheap.

 

[quattroJoe]

Picked up a set of Lisle hose picks and a knipex side cutters. Had some cheap picks but they bent pretty easy so hoping these hold up better! First Knipex purchase and they feel good! Ordered the mini bolt cutters too, can't wait to see what that's like!

I've got those Knipex side cutters too and use the hell out of them, can't say enough good things about ALL of my Knipex tools.

 

[gaffobohs]

I've got those Knipex side cutters too and use the hell out of them, can't say enough good things about ALL of my Knipex tools.

Hard to get them here in Saskatoon. Have had channelocks till now but had an impulse moment on the tool truck

 

[Qualitytools]

From sears. These are my first knipex.

Nice Knipex collection to start with, you'll like that German engineering!

 

[bodyguy16]

Ordered some new goodies from ebay....

Es tmx-589 tech meter kit with load pro leads I wanted the leads and needed a new multimeter so figured what the hell.

Snap on shl80a to complete the set and a makita dt01 to compliment my fd01

And while im on vacation I stopped by the local pep boys for a look and found these nice pliers for 8$ steelman

Its a good week!

 

[wkderf]

first of many M12 goodies from Milwaukee, to compliment my expanding M18 collection:

 

[NorCalWrenchin]

I know. I meant my driver didn't have them. All out.

I could use some decent 1/4 wobbles and to get a ratchet too is a good deal.

Ah hah. Reading comprehension fail on my end