Show your new tool arrivals

[spike99250]

Picked these up today at the local pawn shop for $10. 440, 426 and 350S. Didn't really need the 350S, not sure how they are best used, seem like a linemans pliers but with spring assisted opening? Either way, for $5 I wasn't going to pass them up, they are like brand new.

Th350s are for tying rebar. The hook lets you pull the wire tight without slipping off and the springs helps so you aren't constantly opening them all day.

 

[Straightgrain]

I got 2 new drop forged 6" Wilton c-clamps today.

 

[Chadwilliam1]

Where did you get those from?

 

[Zeroek]

South Bend. You?

In between Muncie and Anderson.

 

[AA/FC]

The MAC guy dropped off a set of pliers that were on promo last month, (Chinese made) and a set of pinch off pliers. (American made)

 

[Bobcat753]

Started my Milwaukee m12 addiction tonight. Picked up the ratchet (bare) and the drill kit.

Battery's are on the charger now,

 

[biscuit141]

Always wanted to get one of these, picked this one up from the pawn shop for $5. Hopefully I can figure out how to use it properly and sharpen some bits.

 

[Hinez Wengler]

Buy a jewelers vizor and practice by hand.Guides are good for bits under 5/16 which are cheap to not even sharpen. Throw thise and grab new. Bigger bits can easily be done by hand.

 

[Hinez Wengler]

This French man is an expert

 

[Tech89]

Got these two today off the Snap-On truck.

Got this used with two batteries and a charger. Seems to ve in pretty good condition and working order.

All for two hundred dollars. Hopefully use them a lot. Anyone else have tge swivel extensions?

-Pat

 

[92integra]

Tech89

i have the extension swivels and they work out great. originally i didn't like the size of the shafts on them but realized that will help then transfer torque better then i was cool with it.... they are really nice when you need to go double swivel! you'll like them alot btw i think you got a steal on all that i payed like 120 or so for the swivel extensions alone.

 

[Tech89]

Tech89

i have the extension swivels and they work out great. originally i didn't like the size of the shafts on them but realized that will help then transfer torque better then i was cool with it.... they are really nice when you need to go double swivel! you'll like them alot btw i think you got a steal on all that i payed like 120 or so for the swivel extensions alone.

I was actually wondering how it would work out to go double swivel with them haha.

-Pat

 

[Mazdaratti3]

Some stuff from the past few months

 

[ladrones]

Added a few items.

Sent from my iPhone using Tapatalk

 

[Trey T]

Nice M18 impacts you got there, Mazdaratt

 

[canuckian]

Snappy Oshm713 6-point set from member Franzdom.

 

[marinepride]

Those are ****!

 

[1foxracing]

This is the Jonnesway 18PC, T-Bar, Metric Ratcheting Wrench Set from Fastenal for $43.63 (Reg $316.82) CoO- Taiwan Size 8-19mm no skips.

I have some Jonnesway screwdrivers at work and they were made in Germany, no **** luck here but for the sale price I'll give them a try.

Fastenal link-https://www.fastenal.com/web/products/details/0267540

 

[Fcvapor05]

Never seen those before- basically a flex-head crowfoot. Very cool. I could see those being very useful in certain limited access situations.

 

[marinepride]

What is the part#for those?

 

[marinepride]

Nvm. Ordered

 

[NewEdgePerf]

Interesting! Fastenal, you say? Might have to stop down at the local Fastenal and see what they have to offer.

Thanks for sharing.

Tony D

 

[Fcvapor05]

I ordered one too. I can remember a couple of scenarios where these would have been useful. No way I'd pay $300+ for that set but for $40.. why not.

 

[Zeroek]

Got these today at a local pawn shop. Couldn't find much of anything else I needed in the 3 pawn shops I went to. A set of USA made MAC standard impact sockets in 1/2" shallow. I ended up paying 69.99 + tax. I don't know if it's a good deal or not but need a nice large standard set. One of the other pawn shops had the deep set that was the same as this one but for like $125. If it was just a little cheaper I may of got it too.

 

[1foxracing]

I can't take credit for the "find", somebody else here posted the link in another thread that I can't find and didn't post in so I can't search for it. Thank you go's to that person though.

 

[rmsg0040]

Cornwell JR72LH, has some nice weight to it, rubber/hard plastic handle, seems bone dry, definitely a quality piece

 

[dudutzu905]

I can't take credit for the "find", somebody else here posted the link in another thread that I can't find and didn't post in so I can't search for it. Thank you go's to that person though.

where can I find the link? can you pass on the link? that stuff looks handy

 

[AndrewV]

Those cornwell handles remind me of Mayhew's for some reason.

 

[90zcar]

Those cornwell handles remind me of Mayhew's for some reason.

Kinda remind me of the kobalt handles also


Sent from my iPhone using Tapatalk

 

[franzdom]

where can I find the link? can you pass on the link? that stuff looks handy

Link is under pics...

https://www.fastenal.com/web/products/details/0267540

 

[rmsg0040]

Those cornwell handles remind me of Mayhew's for some reason.

Except the mayhew's have softer rubber

 

[Local]

spud wrench and some 1/2 wrenches I got at a pawn shop the other day. The proto isn't in the best shape but still works great. Spud wrench is made by williams and going into my work bag.

 

[1foxracing]

Link is under pics...

https://www.fastenal.com/web/products/details/0267540

 

[low_dakota94]

Picked up one of these to throw in my road box for work so I don't lose or beat up my good ratchets. Guess we'll see if it can hold up lol. But for 11 bucks and a free parts tray can't complain lol.

 

[cptn_zippy]

That's one of my favorite ratchets...so versatile.

J

Picked up one of these to throw in my road box for work so I don't lose or beat up my good ratchets. Guess we'll see if it can hold up lol. But for 11 bucks and a free parts tray can't complain lol.

 

[franzdom]

Oh BTW I had to order this, thanks!

It may keep me from having to do this:

 

[low_dakota94]

That's one of my favorite ratchets...so versatile.

J

Yeah I have flex heads but never had a Roto so figured I'd give it a try.

 

[MagnumForce]

After using normal pipe wrenches all day I said "Enough of this ****" and went out and bought 2 Aluminum ones for tomorrow, I really like the Kobalt ones.

 

[gaffobohs]

This is the Jonnesway 18PC, T-Bar, Metric Ratcheting Wrench Set from Fastenal for $43.63 (Reg $316.82) CoO- Taiwan Size 8-19mm no skips.

I have some Jonnesway screwdrivers at work and they were made in Germany, no **** luck here but for the sale price I'll give them a try.

Fastenal link-https://www.fastenal.com/web/products/details/0267540

Will try the local Fastenhal tomorrow as they do not ship to Canada. Looks like they might come in handy someday, even just to use them as stubby ratchet wrenches. Whats the deal with the standard set? Have to order a box of 6?

 

[low_dakota94]

[emoji481]

Dang I don't really need it but at that price I'm tempted to order that kit lol.