fireeqpsrv
Well-known member
Those look neat. If they offer the SAE at the same price I might think about it. I hate it when you get either the SAE or metric on a "special" price but the other is either not available or is full price!
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Those look neat. If they offer the SAE at the same price I might think about it. I hate it when you get either the SAE or metric on a "special" price but the other is either not available or is full price!
low_dakota94
Well-known member
- Joined
- Jun 26, 2014
- Messages
- 79
That's where I'm at lol.
Jarhead0408
Well-known member
Yeeeeaah,
Don't tell the wife, but I ordered one as well. I've been wanting a set for a while, but the Snappy's are way too expensive for me.
Here's hoping they clearence out the SAE set too!
mkv221
Active member
Got these in the mail yesterday.
3/8 Dr. Snap on standard hex sockets and snap on ratchet wrenches.
3/8 Dr. Snap on standard hex sockets and snap on ratchet wrenches.
fireeqpsrv
Well-known member
Yeeeeaah,
Don't tell the wife, but I ordered one as well. I've been wanting a set for a while, but the Snappy's are way too expensive for me.
Here's hoping they clearence out the SAE set too!
I am thinking about biting the bullet and ordering a set. Did any of you see the 39pc set that has some of the heads in it also> nothing says anywhere what is included in that set.
Crown Imperial
Well-known member
Gedore clearance items
derwin75
Member
fireeqpsrv
Well-known member
Ok I got curious about the SAE and the actual price. I have never been in a Fastenal store or done business with them I just picked up the phone call the store close to me and ordered both set directly through them. Guess what the Standard set was sold to me cheaper than the Metric yep got both sets a coming!!!
AlexNGreen
Well-known member
Gedore clearance items
Where did you get those?
Torqline87
Member
- Joined
- Jul 16, 2014
- Messages
- 10
My first Dual 80 Ratchet S80. Now I'm hooked. I do want the FLF80 next.
its a bad addiction to have!!!
Attachments
marinepride
Banned
I had my dealer check the stock again. Snap-On has 100+ sets of screwdrivers in those three colors in stock.
2ndGearRubber
Well-known member
Re: SUNEX TOOLS 2645 - 26 pc. Standard Metric Impact Socket Set
You're going to love those sockets. Sunex makes a top-quality product. Good buy.
You're going to love those sockets. Sunex makes a top-quality product. Good buy.
LOL, is that a cummins key?
Tellingthem
Well-known member
Saw these were on sale and finally got the set. I just really like them for some reason.
oldjamesy
Well-known member
Saw these were on sale and finally got the set. I just really like them for some reason.
I've had these for a couple years now and I'm happy with them .
Reply to post 16300
I had a cheap ADF helmet (Harbor Freight style) and after 3 years the battery inside went flat. I repaired it, but I still wanted something better and I think Speedglas is as good as it gets. Love the side windows...
I mostly do MIG (sheetmetal repair).
Ok... new stuff that just arrived today...
I had a cheap ADF helmet (Harbor Freight style) and after 3 years the battery inside went flat. I repaired it, but I still wanted something better and I think Speedglas is as good as it gets. Love the side windows...
I mostly do MIG (sheetmetal repair).
Ok... new stuff that just arrived today...
biscuit141
Well-known member
Saw these were on sale and finally got the set. I just really like them for some reason.
Do you have the model number for the set? Price?
ihateminimumwage
Well-known member
- Joined
- Jan 26, 2012
- Messages
- 3,960
Looks to be a mix with the single stubby flat head and 5 torx drivers.
Looks to be a mix of these sets:
49020 6pc Professional Screwdriver Set
49300 5pc Professional Screwdriver Set
49305 4pc Professional Stubby Screwdriver
49302 7pc Professional Torx Set
All are also available through SK. Some people don't seem to be fans of them (whether it's the grips or the shafts), but I love my Craftsman Pros/SKs, they're my go-to screwdrivers.
canuckian
Well-known member
Lang side terminal wrench, some black nitrile gloves, anti-vibration pads and flexzilla pressure washer hose
Last edited:
Tellingthem
Well-known member
item # 00918726000P Model # 10200002 http://www.sears.com/craftsman-16pc-professional-screwdriver-set/p-00918726000P?prdNo=3&blockNo=3&blockType=G3&sid=I0084400010000100600&aff=Y&PID=6147012&AID=11042411
$77.39 but you should be able to use Codes and Coupons to get it cheaper SAVE15, 10POINTS, ETC.
It also tends to go in and out of stock so it may not always be available.
OxJaw
Well-known member
EDIT: Beat by a minute
Showing OOS right now.
http://www.garagejournal.com/forum/showthread.php?t=254881
got a part number/price for the SAE set?
Now I wish they sold just the SAE wrench sections..don't need two of the t-handles and all the accessories ha ha.
fireeqpsrv
Well-known member
Link is:
https://www.fastenal.com/web/products/details/0267541
part number is:Fastenal Part No. (SKU): 0267541
It does not show the price online but when I called and inquired the the price of 37 and some change.
Jarhead0408
Well-known member
No kidding? What did you pay for the standard set? I think I'll be making a phone call tommorrow.
Jarhead0408
Well-known member
Never mind. Just saw you had responded. Thanks a million man!
1foxracing
Well-known member
Got these new Wright ratchets yesterday.
Hako86
Well-known member
Just got these. Not really tools, but they are at least tool related 
.
350 washers and 128 nuts. Not bad for a total of 5 euros.
Also bought a cheap 7 piece screwdriver set. They aren't great quality, but I already have the top brands so I thought I would just buy them since they were made of S2 steel and they were only 5 euros. You can't have enough screwdrivers
.350 washers and 128 nuts. Not bad for a total of 5 euros
.Also bought a cheap 7 piece screwdriver set. They aren't great quality, but I already have the top brands so I thought I would just buy them since they were made of S2 steel and they were only 5 euros. You can't have enough screwdrivers
Crown Imperial
Well-known member
mattamd_xp
Well-known member
Truckload Milwaukee sale from a local supply house. $125 trade in on any old comparable cordless drill/battery/charger combo, free extra 4.0 Ah battery, free sawzall. All 18v Fuel line stuff. Still waiting for the 12v stuff I ordered to come in.
Sorry about the crappy pic, my cell phone was all I had at the time.
Sorry about the crappy pic, my cell phone was all I had at the time.
Attachments
1foxracing
Well-known member
Today when I left work I needed to stop at my bank that is a just down the street from the local Harbor Freight store. The road has a center turn lane and I spot a bag laying in the middle of the lane. I pulled up next to the bag and noticed harbor freight on it. open it up and both of these were inside. Somebody must have put it on their roof, on top of the trunk, or in a open pickup bed and drove off.
I looked on the receipt to see if they charged it and I know some stores print your name on the receipt, they paid cash and used a 20% coupon as well so they won't be out to much $.
I opened it up when I got home and the pass through ratchet feels pretty smooth and the sockets actually look pretty nice! I can use the tweezers too, my day job is manufacturing parachutes and I use 17 different industrial sewing machines. The tweezers will come in handy when re-threading some of the machines.
In my home box now.
I looked on the receipt to see if they charged it and I know some stores print your name on the receipt, they paid cash and used a 20% coupon as well so they won't be out to much $.
I opened it up when I got home and the pass through ratchet feels pretty smooth and the sockets actually look pretty nice! I can use the tweezers too, my day job is manufacturing parachutes and I use 17 different industrial sewing machines. The tweezers will come in handy when re-threading some of the machines.
In my home box now.
1foxracing
Well-known member
All came from Tool Up except for the 3440, that was a E-bay find.