Show your new tool arrivals

[marinepride]

They have them at my hf. I have both

 

[royesses]

^ This.
It is not listed on the HF web site. At least I have never seen it.
I happened to find one walking down an isle. It was the last one on the rack. It is surprisingly good quality and COO not PRC which is a plus.

It is on thier web site:
http://www.harborfreight.com/t-handle-tap-ratchet-wrench-97633.html

 

[Crown Imperial]

Oh. Thanks.
Yes - I fail at the interwebz.
The reviews are good on it. No surprise there. It really is mucho macho sturdy.

 

[stonesfan68]

Mac locking extension with drive handle. Made in Taiwan in case anyone was wondering. I've pondered getting one of these for awhile and decided last weekend that the tool would be very handy in a lot if situations.

 

[Ruger_556]

After seeing rugers post last week, I had to have one of these. It's big, but not terribly bigger then my mg725.

You're going to like that

My latest arrivals... I might'a went overboard on Tekton stuff but for how often I use crowsfoot and stubby wrenches probably be fine. The flare wrenches have good reviews on here and Amazon so I figured I'd try them out



Set of nice Starrett pin punches and a Clik-Stop adjustable

 

[StackedDodge96]

You're going to like that

My latest arrivals... I might'a went overboard on Tekton stuff but for how often I use crowsfoot and stubby wrenches probably be fine. The flare wrenches have good reviews on here and Amazon so I figured I'd try them out



Set of nice Starrett pin punches and a Clik-Stop adjustable

I have some tekton impact sockets and a set of their giant crowsfoot wrenches. They work great, no complaints. Im sure im alot harder on them than you are

 

[ladrones]

Let me know how they work. I'm interested to see how they perform.

Jason

They are really heavy. I will give it a test.

 

[StackedDodge96]

Old die grinder is going out, so I picked up this cornwell one with burrs.

 

[Chace365]

Lower end 1/2 impact set from matco.

Let us know how they hold up. I came across the need for some >1" sockets today at work.

 

[DodgeMech]

Let us know how they hold up. I came across the need for some >1" sockets today at work.

those adv's are actually made in Taiwan, like the GW sockets...but either way, they are awesome...i beat on mine with my 231 on 1 ton front ends day in and day out for two years now and they've yet to fail me

 

[marinepride]

Old die grinder is going out, so I picked up this cornwell one with burrs.

How much was it if you dont mind me asking?

 

[amlv20]

After seeing rugers post last week, I had to have one of these. It's big, but not terribly bigger then my mg725.

texted while driving recklessly

Is the gun made in USA or just the boot? I have the smaller 3/8 Mac version and was under the impression it was china made for some reason.im diging this porto version looks awesome.

 

[Ruger_556]

Is the gun made in USA or just the boot? I have the smaller 3/8 Mac version and was under the impression it was china made for some reason.im diging this porto version looks awesome.

Gun is Taiwan, the boot is USA

I have some tekton impact sockets and a set of their giant crowsfoot wrenches. They work great, no complaints. Im sure im alot harder on them than you are

Probably true... I'm maybe a bit too attached to the torch for stubborn stuff.

 

[1950mercury]

Mac locking extension with drive handle. Made in Taiwan in case anyone was wondering. I've pondered getting one of these for awhile and decided last weekend that the tool would be very handy in a lot if situations.

I think vim tools makes them for mac

 

[panknuckshovel]

I think vim tools makes them for mac

Yah, part#HD375. The 6 and 10" set is on sale for $9.54. I ordered it last friday and am supposed to have it this thurs. 1/2" drive are 11.58

 

[Surreal001]

Used one of my loyalty points at AZ to bring home a free Duralast 3/8 torque wrench.

 

[amlv20]

Gun is Taiwan, the boot is USA



Probably true... I'm maybe a bit too attached to the torch for stubborn stuff.

Thought so

 

[ADSR]

Gun is Taiwan, the boot is USA

Have you put it through the paces?

 

[Ruger_556]

Have you put it through the paces?

I'll do a review one of these days

These came today also, 12 mm and 1/2" Proto impact hex sockets

 

[whitemamba]

Since shop isn't built yet and air hard to come by I felt the need to pick this up

 

[jdlawl09]

Wera tools are extremely nice, made in Germany. Is Amazon the best place to buy the WERA brand?

 

[jdlawl09]

Eppy's is a great store. When I walked in I was shell shocked at the size, and every square inch is used. If you live in the Brooklyn area no better place to go for handtools.

 

[slik560]

My primary Benz mechanic retired and had this collection of virtually new Snap-On tools & box that he had at home and seldom used. Now that his shop tool box is in his garage, he sold all this to me for a very favorable price. 95% Snap-On, other tools a mix of S-K, Vice Grip, etc. Most of these tools look untouched.

 

[Hpozzuoli]

^^^^score!

 

[MrJason]

Yah, part#HD375. The 6 and 10" set is on sale for $9.54. I ordered it last friday and am supposed to have it this thurs. 1/2" drive are 11.58

Where did you find that price? I'm having a heck of a time finding anything lower than $15.00 for the pair.

Jason

 

[mattamd_xp]

Where did you find that price? I'm having a heck of a time finding anything lower than $15.00 for the pair.

Jason

http://www.vimtools.com/store/page7.html

Shipping isn't super cheap for what it is, but still a good deal.

 

[MrJason]

http://www.vimtools.com/store/page7.html

Shipping isn't super cheap for what it is, but still a good deal.

Thank you, it's reasonable enough. I'll place my order via VIM.

Jason

 

[GlenC]

http://www.vimtools.com/store/page7.html

Shipping isn't super cheap for what it is, but still a good deal.

Yea, shipping and tax make them more expensive than another online seller!

 

[Hpozzuoli]

I got the best tool I have gotten in a while. It's a kneeling pad. This is a godsend and I am happy to have it. For $15 it's a great investment.

 

[franzdom]

KNIEKISSEN, Birkenstock knee pad

 

[Dust Devil]

Both of those are bitchen. Good kneepads are a must for me at work.

This is actually a really cool thing.

http://www.harborfreight.com/rolling-knee-pads-67406.html



Also I cut these up to make smaller pads than can go on both sides of things that are being worked on so your not constantly moving the pads around.


http://www.harborfreight.com/anti-fatigue-roll-mat-61241.html

 

[MrJason]

Just in from Amazon!

 

[Blown V2]

^^ That's a nice looking set.

I love Amazon. Here is my latest delivery. Got the lot sent to my door, for what the small pliers retail for in Aus!

 

[Taylor J.]

^^ That's a nice looking set.

I love Amazon. Here is my latest delivery. Got the lot sent to my door, for what the small pliers retail for in Aus!

What kind of pliers? They look nice

 

[Blown V2]

Knipex 76 125, electronics pliers. Needed something nimble for under dashes etc.

 

[Taylor J.]

Knipex 76 125, electronics pliers. Needed something nimble for under dashes etc.

Good for tie wraps?

 

[dgxlh]

Took up this deal from tooltopia. I can't wait to use these I've been wanting something like this for awhile. Never ordered from there before but was very pleased with my purchase, price, and quick shipping

 

[chris6278]

3 piece pry bar set on sale at sears for $17 made in USA. Couldnt pass it up

 

[StackedDodge96]

How much was it if you dont mind me asking?

$169

 

[Zeroek]

Since shop isn't built yet and air hard to come by I felt the need to pick this up

Mine has took a beating. I love it. The rubber is coming off which is the only bad part about it. I barely use my air ratchet anymore.