Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
redwrench60
Well-known member
purplezr2
Well-known member
Matt is that in an epic middle drawer on an 84" box
GTA Matt
Well-known member
It's a 76" epiq
Before...
After
Before...
After
MrJason
Well-known member
Nicely done! Amazed at how the organization cleared up your ability to grab what you need, faster.It's a 76" epiq
Before...
After
If I can't get my custom made versions, pdq, I'll have to look into these.
jes_si
Well-known member
sure will! Their a little tuff to open but I think its one of those things where you gotta use the tool often to loosen it up.
I honestly think the 10mm was the only one used, it had some grease on it. The others look to be brand new.
KaHuNaZ
Well-known member
Picked up a few tools over the week.
Got tired of carrying several different bags here and there, so I decided to consolidate everything into a larger bag. It doesnt look big in the pic, but its a beast of a bag. Im worried about hauling it down the stairs when full.
Got tired of carrying several different bags here and there, so I decided to consolidate everything into a larger bag. It doesnt look big in the pic, but its a beast of a bag. Im worried about hauling it down the stairs when full.
low_dakota94
Well-known member
- Joined
- Jun 26, 2014
- Messages
- 79
Got my new Ernst rails for the new cart yesterday.
bodyguy16
Well-known member
New to me Tml836, wanted a hard handle and the price was right. Now I just need a rebuild kit but my snappy man in on holiday....
Marc Benjamin
Well-known member
Bought this off the Snap-On truck this morning. Driver had taken it in on trade. 1979 f730
Wow, how much did he charge you for that?
Didn't realize that they took in trade ins from the 70/80's !
Snap-On today and a recent scanner from Amazon
I have one of those 3100's at work. It's a nice code reader.
GTA Matt
Well-known member
Picked up a new Matco max-go (launch) scanner a few days ago. Wanted to get some seat time with it before offering any type of opinion. So far VERY impressed with it. Similar in size to my Verdict, the two should compliment each other nicely.
Toolhorder
Well-known member
Those pliers are awesome. I've had a pair of them about a year now and they work great.
bart1
Well-known member
Picked up some old standard snap on flare wrenches. And one photo comparing old to newer.
devoncoolman
Well-known member
We have the maximus at work and so far i kind of like it. But not too impressed with it because its been sent in for repair twice a d was in about a month each time. Mother board went bad second time. Looking at purchasing the new verus pro today. Getting a good deal on the whole set up tool box and all.
NorCalWrenchin
Well-known member
Buy the sockets,
Get the pliers haha had to do it.
Picked up the 106flipset the other day, and the picks..
Get the pliers haha had to do it.
Picked up the 106flipset the other day, and the picks..
MikeF2316
Well-known member
I've been borrowing (and storing) a siding brake for buddy (his wife and my wife are cousins) for a few years. I was lucky enough to use it on the house and my garage. Since in the last week or so, I basically go volunteered to help a friend side his house, I was planning on using it again. . . . . and I knew it was going to happen. He stopped out last to tell me he was coming to get it. Oh well such is life.
So what did I do ? I anted up and made the investment for my own. Tapco Pro 14, 10'6"
So what did I do ? I anted up and made the investment for my own. Tapco Pro 14, 10'6"
Last edited:
MikeF2316
Well-known member
Mini pry bars set from Princess Auto:
Buy the sockets,
Get the pliers haha had to do it.
Picked up the 106flipset the other day, and the picks..
How much were the sockets if you don't mind me asking?
Sent from the sticks
Chadwilliam1
Well-known member
Snap on 1/2 ratchet paid 85 for it on eBay seller said it had USA on it doesn't. Instead of returning it he refunded me 15 and an sk 1/4 drive 10 mm socket.
Sent from my HTC Rezound using tapatalk.
Sent from my HTC Rezound using tapatalk.
Finally got some sockets (other than a lug nut set) for my Milwaukee 2763 cordless impact. Princess Auto, no sizes skipped from 10 up to 36 except 31! I hate sets skipping common sizes... They're staying in the case for now, I have no room in my socket drawer.
Nice! What did they set you back?
marinepride
Banned
All my new toys for the week. Springfield m1a. Micro lithium drill and ratchet. 3/8's metric semi deep socket set( which are for sale if anyone wants them) and my new kitten!
Farmall450
Well-known member
All my new toys for the week. Springfield m1a. Micro lithium drill and ratchet. 3/8's metric semi deep socket set( which are for sale if anyone wants them) and my new kitten!
SO sockets?
Nice springfield too!
MikeF2316
Well-known member
$70. Regular $100, on special until Sunday.
http://www.princessauto.com/pal/Imp...-1-2-in-dr-Metric-Impact-Socket-Set/8476038.p
marinepride
Banned
Sure are!
Jarhead0408
Well-known member
M1A takes the cake!
Thats a hell of a deal for a complete set like that
woodstockva
Well-known member
Notorious BRT
Well-known member
Not new, just new to me, H.K. Porter 36" bolt cutters. Best part is they were free, buddy of mine just gave them to me for helping him with his turbo.
cosmik binturong
Well-known member
All my new toys for the week. Springfield m1a. Micro lithium drill and ratchet. 3/8's metric semi deep socket set( which are for sale if anyone wants them) and my new kitten!
oops... looks like you got an incomplete kitten, call customer care for missing parts!
Last edited:
marinepride
Banned
Its on backorder 4-6 weeks!oops... looks like you got an incomplete kitten, call customer care for missing parts!
bodyguy16
Well-known member
Nice set up Matt, any thoughts on the crp123 lauch scanner? Thinking of getting something similar for work although not a necessity. .Picked up a new Matco max-go (launch) scanner a few days ago. Wanted to get some seat time with it before offering any type of opinion. So far VERY impressed with it. Similar in size to my Verdict, the two should compliment each other nicely.