Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
97tbird
Well-known member
good choice on that ratchet!! So you bought the kit? Nice! I will see how loud it is tomorrow at work, I didnt even know it was!
I had just the regular gun and then got the "quiet flo tip" after my boss was crying that it was too loud... still loud for a blow gun. f*** it, he can deal with it.
Its also fun to stick things in the barrel and watch em go flying.... I mean... so i've heard
Congrats on the purchase that's a fine set. From now on though, spend some time in the "hot deals" section. Sears sells that same exact set. I've bought 3 of them for less than $40 each. I can imagine what you paid Mac for it....
AustinG
Well-known member
Our sears doesn't even sell tools anymore that's how bad it's gotten. I got it for a bit cheaper then regular my mac dealer is my neighbour so he gives me a nice discount.
Been a while since I've posted some new tools. Here's some purchases over the last 6 months.
Channellock water pump pliers, needle nose, cman large usa vise grips, and klein wire stripers. And just out side of the frame, IR 3/8 air ratchet.
Gearwrench metric flex ratcheting flare nut wrenches. Pittsburg pro 1/2 spinner, kobalt 3/8 spinner, and cman 1/4 spinner.
Gearwrench 84t 1/2 ratchet. This thing is a beast.
All the way in the back are 31 and 36" cman pry bars.
Boschit 3/8 and 1/2 locking extentions. Absolutley love this things. Duralast swivel spark plug sockets and extra long 5/8 spark plug socket with ball swivel. And an oxygen sensor crow foot socket. Klutch 6 and 7mm short and deep, 6 and 12 point sockets, for my ocd trays.
Carlyle: 1/2 sockets. All inclusive up to 24mm and 1 1/4, 90 tooth comfort grip 3/8 ratchet, 60 tooth flex 3/8 ratchet, 10,6, and 3" extentions 1/2 drive. 18" carlyle breaker bar. Hf 3/8 composite ratchet, $5 china pickle fork.klutch 1/2 drive flex ratchet. Imported from virginia.
Channellock water pump pliers, needle nose, cman large usa vise grips, and klein wire stripers. And just out side of the frame, IR 3/8 air ratchet.
Gearwrench metric flex ratcheting flare nut wrenches. Pittsburg pro 1/2 spinner, kobalt 3/8 spinner, and cman 1/4 spinner.
Gearwrench 84t 1/2 ratchet. This thing is a beast.
All the way in the back are 31 and 36" cman pry bars.
Boschit 3/8 and 1/2 locking extentions. Absolutley love this things. Duralast swivel spark plug sockets and extra long 5/8 spark plug socket with ball swivel. And an oxygen sensor crow foot socket. Klutch 6 and 7mm short and deep, 6 and 12 point sockets, for my ocd trays.
Carlyle: 1/2 sockets. All inclusive up to 24mm and 1 1/4, 90 tooth comfort grip 3/8 ratchet, 60 tooth flex 3/8 ratchet, 10,6, and 3" extentions 1/2 drive. 18" carlyle breaker bar. Hf 3/8 composite ratchet, $5 china pickle fork.klutch 1/2 drive flex ratchet. Imported from virginia.
Last edited:
CarsonConcepts
Well-known member
These all appeared in my box this morning. IR w5330 cordless right angle impact I won off of an Instagram contest.
Mountain stubby 1/4" air ratchet and an impulse buy yesterday. The snapon RAF80 thin ratchet with short socket set.
Sent from my iPhone using Tapatalk
supersteve
Well-known member
I don't blame you, I love my Knipex stuff too.
Tarheelgarage
Well-known member
you got raped on that purchase; should have bought via sears; same kit
I had just the regular gun and then got the "quiet flo tip" after my boss was crying that it was too loud... still loud for a blow gun. f*** it, he can deal with it.
Its also fun to stick things in the barrel and watch em go flying.... I mean... so i've heard
valve stem caps shoot all the way across the shop. Put a set screw in them and it gets dangerous.
98slonoma
Member
Air Lift HD and SK long handle 3/8 from tooltopia. The snap on pliers set is part of a buy one get one deal, buy the deep 3/8 metric sockets get the plier set and crimpers free. Found the long handled Matco 1/2 inch 88 tooth in the used tool bin on the Snap on truck as well, for $45 I couldn't pass it up.
Attachments
These all appeared in my box this morning. IR w5330 cordless right angle impact I won off of an Instagram contest.
Mountain stubby 1/4" air ratchet and an impulse buy yesterday. The snapon RAF80 thin ratchet with short socket set.
Sent from my iPhone using Tapatalk
You ****!
What's the flat handle snappy?
sberry
Banned
I would hve been glad to trade 2 442's for another used 440.
Haha. Don't say that. You should see my power tool drawer. I also won a W7150 impact.
And the flat handle is the RAF80. It comes in handy on some of the stuff I have to work on. But way overpriced for as much as I won't use it. So yesterday I asked my Snap on man to give me a deal on it he took 100 dollars off just like that so I took it.
Sent from my iPhone using Tapatalk
wow! You have horse shoes or what?
post more pics, brother!
I've got a horseshoe wedged well........ We aren't going to tell that story haha. Anyways ask and you shall receive. Some of these I've had a couple years. The snapon 14.4v 3/8" impact is getting replaced next week by an IR W5130 3/8" IQV20 to go with the other 2 I've got.
Sent from my iPhone using Tapatalk
abvw
Well-known member
CDR761 and CT761 incoming as well, replacing my entire M12 line...
Sent from my Q10 using Tapatalk
Askme42
Well-known member
owenst7
Well-known member
JKady
Well-known member
Well mine's a new tool storage arrival but still... Picked up this older Craftsman locker from a former co-worker last night since most of my bulkier stuff (fluid transfer pump, welding helmet) was just sitting on top of my box in a heap. I may not have the widest or deepest setup in the shop but she's hands down the tallest now! Probably going to shift all the misc **** out of the Kennedy box next to it into the drawers of the locker to free up work space on top of my box.
After patiently monitoring craigslist for 8 months I struck gold. Bosch 1590EVSL with case and a bunch of blades. Very lightly used. Poor chap was going through a divorce and only asked $60.
The clamp was $4, the last of the Home Depot liquidation.
The clamp was $4, the last of the Home Depot liquidation.
A few things from the past few days:
Ebay on those Mac wrenches? I remember seeing someone on ebay having those 2 for cheap.
Still on ebay. $30.
Piece-it Pete
Well-known member
Franz, is that WD-40 Snap On?
Pete
Pete
Yes, the seller is also active here. They are sweet, and having these four sizes will cover most of my needs.
panknuckshovel
Well-known member
Franz, is that WD-40 Snap On?
Pete
Didnt you notice the snap on red tube?
SASORacing
Well-known member
Got these today, need to strip the paint off them, but the jaws look ok.
£20.0
Lol wow, those look sticky me, krylon?
CDR761 and CT761 incoming as well, replacing my entire M12 line...
Sent from my Q10 using Tapatalk
Why the switch?
I just got a lab vacuum pump off of ebay for composites work. It pulls as close to 30" of vacuum as you can measure on a gauge and it weighs 60lb
I love industrial tools. They are so over built.
I have rebuilt hundreds of those.......Edwards Two stage rotary vane vacuum pump.They run forever, just keep the oil fresh.
Last edited: