quattroJoe
Well-known member
finally got my hands on one of these:
I haven't seen that one before, looks like it could come in handy though. Do you have the part number?
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
I haven't seen that one before, looks like it could come in handy though. Do you have the part number?
DiscoBerry
Well-known member
- Joined
- Jun 5, 2010
- Messages
- 84
is that ebrake tool good for doing rear calipers with ebrakes in them?
SASORacing
Well-known member
I have that! Great balance and is a trusty buffer!
SASORacing
Well-known member
Anyone wanting a new welder, etc. look at zoro.com now through Sept 3 you can get 25% off orders over $300 max $2000 (that's $8000) plus free shipping. code = DAYOFF ...
I got a welding table and one clamp (delivered in 2 days):
Oh nice table how much did you get that for all said and done with that sale?
Hafen_Kafer
Well-known member
1/32-1/2 keyless Albrecht drill chuck. 
GlenC
Well-known member
$272 with clamp and tax
Indexmill
Well-known member
1/32-1/2 keyless Albrecht drill chuck.
How much did you pay for that keyless Albrecht drill chuck and arbor?
If new, it's worth about $300.
Hafen_Kafer
Well-known member
MrJason
Well-known member
Package from Amazon, with new Tekton and Gearwrench stuffs.
More to come. .
More to come. .
panknuckshovel
Well-known member
5 bucks and some free SYW points. professional tools ordered, showed up as industrial oh well, the online section is a mess but its for the home box so no big deal
Is that a stubbly double box end?
Bighead38
Well-known member
That caught my eye too.
yes... not listed as stubby though on the website unless you check lenght... 2 bucks from sears website, listed at 2.99 now
http://www.sears.com/craftsman-prof...p-00943865000P?prdNo=4&blockNo=4&blockType=G4
http://www.sears.com/craftsman-prof...p-00943865000P?prdNo=4&blockNo=4&blockType=G4
abvw
Well-known member
Landlord was clearing out his surpluses/garbages and was about to toss these into the scrap bins. Luckily I was there to stop him!
1" thick solid wood enclosure cabinets/wardrobes that stands 7ft tall and about 2ft deep and weighs like 250lbs. He said he took 'em out of a school and guesstimate their value at least $1000 a pop new. We threw out a few 1/2" thick cabinets and his bobcat couldn't crush em. We rocked the cabinet across four bay doors and they didn't even flex or deform, these are going to last a lifetime!
Best of all, they were free! And he also paid me $50 for the three hours that I spent helping him hauling ****.
Sent from my Q10 using Tapatalk
1" thick solid wood enclosure cabinets/wardrobes that stands 7ft tall and about 2ft deep and weighs like 250lbs. He said he took 'em out of a school and guesstimate their value at least $1000 a pop new. We threw out a few 1/2" thick cabinets and his bobcat couldn't crush em. We rocked the cabinet across four bay doors and they didn't even flex or deform, these are going to last a lifetime!
Best of all, they were free! And he also paid me $50 for the three hours that I spent helping him hauling ****.
Sent from my Q10 using Tapatalk
Last edited:
Landlord was clearing out his surpluses/garbages and was about to toss these into the scrap bins. Luckily I was there to stop him!
1" thick solid wood enclosure cabinets/wardrobes that stands 7ft tall and about 2ft deep and weighs like 250lbs. He said he took 'em out of a school and guesstimate their value at least $1000 a pop new. We threw out a few 1/2" thick cabinets and his bobcat couldn't crush em. We rocked the cabinet across four bay doors and they didn't even flex or deform, these are going to last a lifetime!
Best of all, they were free! And he also paid me $50 for the three hours that I spent helping him hauling ****.
Sent from my Q10 using Tapatalk
You ****!
Sent from my iPad using Tapatalk
Picked up a 72" Stanley fatMax level at Menard's, on sale for $24.99 (regular $43.99) and grabbed a free wood handled 6-in-1 screwdriver (B-Day gift from Menard's).
jeffmoss26
Well-known member
Few things from Home Depot -
Plano box for lock parts, Dewalt tough case for lockpicks, and 3 bags of cable ties...for .01 a BAG on clearance. I kid you not! They were not marked, the clerk in electrical could not get the barcode to scan so she marked 3.00 a bag, okay not a bad deal. When I went to checkout, they scanned them again, and they came up at a penny a bag! Grainger price...over 60 bucks lol
Plano box for lock parts, Dewalt tough case for lockpicks, and 3 bags of cable ties...for .01 a BAG on clearance. I kid you not! They were not marked, the clerk in electrical could not get the barcode to scan so she marked 3.00 a bag, okay not a bad deal. When I went to checkout, they scanned them again, and they came up at a penny a bag! Grainger price...over 60 bucks lol
MagnumForce
Well-known member
USA made except for the magnet rails. The Hammer is the nicest ball pein I have ever seen. Who makes Craftsman Hammers?
Fedwrench
ALLIANCE MEMBER
Are those MAC branded or Expert branded?
USA made except for the magnet rails. The Hammer is the nicest ball pein I have ever seen. Who makes Craftsman Hammers?
love the nut drivers!
I believe Vaughan makes them...http://www.vaughanmfg.com/
jeffmoss26
Well-known member
Nice scores Jeff!!!
This came Saturday, my first order from Jens. No hassle, didn't even have to sign for it.
Nice gummy bears
Crown Imperial
Well-known member
USA made except for the magnet rails. The Hammer is the nicest ball pein I have ever seen. Who makes Craftsman Hammers?
That really is a nice ball pein. Is the shaft fiber glass? If it is, it could possibly be made by NUPLA. But not likely I think. The Nupla shafts are straight IIRC.
Umclemrbig
MEMBER EMERITUS
SuperSheep
Well-known member
Carlyle Long Pattern Anti-Slip Combo Wrenches. 10mm to 16mm
Powerbuilt Extra Shallow 3/8 Dr Metric Sockets
Powerbuilt Short Torx Sockets 1/4 & 3/8 Dr Sockets and Stubby 1/4 & 3/8 Dr Metric Hex Sockets. And a 15mm Combo Wrench
Powerbuilt Extra Shallow 3/8 Dr Metric Sockets
Powerbuilt Short Torx Sockets 1/4 & 3/8 Dr Sockets and Stubby 1/4 & 3/8 Dr Metric Hex Sockets. And a 15mm Combo Wrench
MagnumForce
Well-known member
Steel, I have a nupla replaceable head fiberglass handled deadblow, that thing is awesome.
panknuckshovel
Well-known member
Aztecaloco707
Active member
just a noob
Well-known member
- Joined
- Oct 24, 2013
- Messages
- 261
Couple mac things
Have you had a chance to bust them out yet? If so, thoughts?
Bighead38
Well-known member
Rest of my mac spanners arrived today
Sent from the sticks
I was wondering the same thing. Is it just me or is the end on more of an angle than most other wrenches. Curious how that would work out.
Marc Benjamin
Well-known member
Burned some Matco credits that I came across. Despite that, I gotta say that these would be the biggest wrench purchase I ever made so I was very gun shy on getting these. But now that I have these in my hands, boy these feel good and I'll probably use these more than a ratchet/socket.
10 PIECE ZERO DEGREE FLEX RATCHETING EXTRA LONG WRENCH SET
My only concern was if it ever got wobbly (since it's a straight pin and cannot be tightened) that these would piss me off eventually. The rep said that it's a simple warranty return if it ever came to that (he said it's very unlikely) and by then the new ones will probably have an adjustable pin.
10 PIECE ZERO DEGREE FLEX RATCHETING EXTRA LONG WRENCH SET
My only concern was if it ever got wobbly (since it's a straight pin and cannot be tightened) that these would piss me off eventually. The rep said that it's a simple warranty return if it ever came to that (he said it's very unlikely) and by then the new ones will probably have an adjustable pin.
Last edited: