Show your new tool arrivals

[archirelic]

In the Gray Tools Canada promotional flyer, Knipex rebrands. They are MUCH cheaper than the Matco versions.

Wish those were available here with the blue grips.

 

[Ruger_556]

I needed one of these like 6 times this week...

 

[GTA Matt]

Got a king tony stubby 1/2" impact and stubby socket set. Deep socket and shallow socket for size for comparison. Has excellent power for its size.

 

[JDon99]

Matt, where did you buy the M7 sockets?

 

[GTA Matt]

They came with the impact, but you can get them separate. Ebay seemed to have the best deals on this one.

 

[90zcar]

I needed one of these like 6 times this week...

Nice. How much and where'd u pick that up at


Sent from my iPhone using Tapatalk

 

[StackedDodge96]

Let me know what you think of the sunex 12 points if you get them. I need a 3/4 inch drive set of 12 points. I can get the cat branded ones for a good price but i'm sure the sunex are still cheaper.

I have the Sunex swivels already. Got the standard in 1/2 and 3/8ths. Got the meteric in 3/8. Ive put my 1/2inch gun on some of them and they havent broken, plus they are of great quality. I just will use these more so I got the 6 point ones.
as far as 3/4 I used pittsburg shallows for the moment, they get the job done. Looked at the sunex ones myself and think that is what I will be buying for mine. Its close between sunex and cornwell.

On the 3/4 swivel comment...
I WISH they would make some. I could use the **** out of those things!!!!!!

 

[GuyllFyre]

Not so recent but newer/older than most of my tools.
HAZET 798-10 German hose clamp tool.



Missed having a set of these. Mine were stolen about 20 years ago and I had salvaged them from a toolbox that had melted down in a fire. These need a little cleaning and lubing but are in great shape for the price.

 

[90zcar]

I needed one of these like 6 times this week...

Nice. How much and where'd u pick that up at


Sent from my iPhone using Tapatalk

 

[Ruger_556]

Nice. How much and where'd u pick that up at


Sent from my iPhone using Tapatalk

$109 on Amazon

 

[JKennedy]

Nothing too crazy, but I found this tucked away at my local Sears... Probably won't ever run across another one ever again so I picked it up!
Double box end offset full polish wrench.
9/16 and 1/2 on the other.
Forged in USA VA 44317.

Can't wait to put 'er to work!

 

[Docman]

my first electric tool from Milwaukee, the M12 Hammer/Drill, Made in Germany.

Germany? I thought all Milwaukee stuff, even the good stuff, was made in China now?

 

[mkIValh]

Sent from my iPhone using Tapatalk

 

[d-rive]

Germany? I thought all Milwaukee stuff, even the good stuff, was made in China now?

Here in Europe, usually, Milwaukee is (still) made in Germany

 

[IFMJohn]

Lisle relay test kit. Plug it in line between the relay and the fuse panel so you have test points for your meter. I needed one the other day working on a dump truck.

http://www.amazon.com/dp/B002MCX6LY/?tag=atomicindus08-20

A 9v battery with 2 jumper leads to 85 and 86 allow the relay to be tested out of the truck also.

That kit is pretty sweet though! I use the same one daily.

 

[ronald5256]

My new bits to add to my toolbox is a mac tools ofw 60-80 oil filter wrench and a set of metric feeler gauges mac part number fg030

 

[Johnk781]

Needed a small, portable kit. Chose the Veto TP4 and packed it. Quite handy.

Up next, electrical.

 

[Nortonscustom]

Needed a small, portable kit. Chose the Veto TP4 and packed it. Quite handy.

Up next, electrical.

That's a really nice setup! Been looking at that same Veto pack myself.

 

[Nortonscustom]

Picked up a new set of Proto screwdrivers from Zoro with a 20% off code. I love that place!

 

[Miller6386]

Not so recent but newer/older than most of my tools.
HAZET 798-10 German hose clamp tool.



Missed having a set of these. Mine were stolen about 20 years ago and I had salvaged them from a toolbox that had melted down in a fire. These need a little cleaning and lubing but are in great shape for the price.

I have a crate of these things. Probably 15 pairs or better......

Telecommunicated

 

[Shady Oaks Garage]

Recently re-did my too box found these mats at local dollar tree. they made good drawer liners for my regular Craftsman box.

 

[powerstroker]

New heel bars for me yesterday.

 

[bahcoswed]

3/8 facom ratchet! I have only used 1/2 facom before, but this 3/8 size really impressed me! Much much smoother mechanism than my 3/8 Snap on flf80 and f80!


Skickas från min iPhone via Tapatalk

 

[Johnk781]

Needed a set for small electrical repairs to take places where the XL is not needed or will not fit. Those bolsters on the VDE pliers will not fit into the slots so had to put them in upside down, Takes a little getting used to, but works fine.

 

[gsingh]

Ohhhh Shiny!

 

[rmsg0040]

CTR761 and CT625, with 2 mini reversible screwdrivers

 

[upgrading]

Needed a small, portable kit. Chose the Veto TP4 and packed it. Quite handy.

The Wera and NWS are quite the good color match also.
Were the NWS pliers sold as a set or separates ?

Picked up a new set of Proto screwdrivers from Zoro with a 20% off code. I love that place!

I hope I can get some of those one day when they go on sale.
Looking good.

 

[jmscollinsiii]

What's the part number on the green mini screw driver?

 

[Sterff]

In the Gray Tools Canada promotional flyer, Knipex rebrands. They are MUCH cheaper than the Matco versions.

Can they (and any Gray tools) be bought in the US?

 

[rmsg0040]

What's the part number on the green mini screw driver?

SDDDM1AG - green
SDDDM1AR - red
SDDDM1AO - orange

 

[90zcar]

I'm really sick of seeing all these damn snap on mini screwdrivers....!!!!
My snap on driver is out of them and only had them for a promotion that went with a screwdriver set deal he was doing and I talked to another one that services the are north of me and he never even had em!


Sent from my iPhone using Tapatalk

 

[ladrones]

Can they (and any Gray tools) be bought in the US?

Same question as I'm looking at the same set of knipex from matco.

 

[DeliveryGuy]

You should be able to find a distributor on the Gray Tools website.

Edit: Even on the "Shop Now" page, they do not ship to the USA. Now you know what it feels like!!! Just kidding, but I'm sure I've read through searching the forums here that there are distributors in the USA, I just don't know who.

 

[kjbenner]

Haven't bought from them before, but KC Tools has them (branded as Orbis, the OEM) for about $100 for all three:

http://www.kctoolco.com/SearchResults.asp?Search=orbis

 

[Van Steele]

The 48-piece thread restorer, in Snap-On guise

Sykes-Pickavant 14/18 mm thread restorer and brake bleeder spanner, small Snap-On screwdriver.
My better half also got me a seal driver set and a brake pipe inside/outside deburrer.

 

[Peter Tommasini]

Here a couple of mine
Peter

 

[Zeroek]

Picked this partial set up at the Flea Market. Needless to say I really like these sockets. Paid $15. Looking for a 3/4 and 5/8 in 1/2" drive 12 point if anyone has them.

 

[Johnk781]

Bought separately from chadstoolbox.

 

[jmscollinsiii]

SDDDM1AG - green
SDDDM1AR - red
SDDDM1AO - orange

Thanks

 

[Zeroek]

And got this from the flea market. 48" new. $50. I like going to these flea markets.