Show your new tool arrivals

[spoon671]

Swag table.

That actually is pretty damn swag! I want this.

Here are my new Snap-On pickups. Love black and red.

 

[BajaBound]

I want those rotors for my VW.

 

[Kaane]

New Witte Hook and Pick set.

 

[panknuckshovel]

That actually is pretty damn swag! I want this.

Here are my new Snap-On pickups. Love black and red.

Those calipers look like jewels and the handles look like wood.

 

[Cheechmaster]

Thought these were nice, I am sick and buying new tools tends to help.

USA masterforce is good stuff!

 

[dutchgray]

View media item 45012Whole bunch of Gedore stuff, mostly old stock. Some Rashol and Habero branded.
I have no use for the body spoon but it was cheap, paving hammer is for work, but the rest is stuff for home.

 

[Crown Imperial]

I love the stubby Gedore composite ratchets.
But price is too high here and tooth count too low.

 

[dutchgray]

I love the stubby Gedore composite ratchets.
But price is too high here and tooth count too low.

I like them too and I have only just got them, thanks to eBay they work out to about £30 for the pair delivered, or about $48. Sometimes eBay auctions get you a real bargain.

 

[DuallyChick]

Just ordered my first set of pliers to go with my new tool set

http://www.amazon.com/dp/B001A3ZBCI/?tag=atomicindus08-20

 

[moto440rider]

Just picked up 3/8ths 18volt lithium Snap on electric impact in orange.
Also got the long metric Allen sockets
Standard Allen sockets
Torx long sockets from snap on also.
Got very good deal on it.
Picked up surr egr port cleaning kit

Sent from my iPhone using Tapatalk

 

[Ruger_556]

I guess this counts as a tool... Should make those freaking impossible grease fittings that Proto uses on their impacts maybe not so bad.

 

[warmpancakes]

Just picked up 3/8ths 18volt lithium Snap on electric impact in orange.
Also got the long metric Allen sockets
Standard Allen sockets
Torx long sockets from snap on also.
Got very good deal on it.
Picked up surr egr port cleaning kit

Sent from my iPhone using Tapatalk

Pretty sure that's a 1/2 drive

 

[Caparris]

Pretty sure that's a 1/2 drive

Pretty sure you are wrong

http://buy1.snapon.com/catalog/item...roup_ID=760609&store=snapon-store&dir=catalog

 

[gipraw]

Picked up a few things the last few days. I had some rewards points to burn at Sears. They screwed up the initial order, then bent over backwards to fix it and even gave me an additional 15% off for my troubles.

Picked up a 72 tooth USA ratchet, pry bars, a USA Hickory handled hammer set, some Eastwood hammers, Som pro screwdrivers, and a 20 piece Gearwrench set. I also picked up a single 11mm so the metric set would be complete.

Grabbed a couple of Tekton pieces from Woot in addition to the Astro t-Handle allen set since I was already placing an order.

 

[DodgeMech]

I guess this counts as a tool... Should make those freaking impossible grease fittings that Proto uses on their impacts maybe not so bad.

this would work right?

http://buy1.snapon.com/catalog/item...675928&supersede=&store=snapon-store&tool=all

and as always, you can get a 2 dollar version from the HF if ya wanted

 

[Ruger_556]

this would work right?

http://buy1.snapon.com/catalog/item...675928&supersede=&store=snapon-store&tool=all

and as always, you can get a 2 dollar version from the HF if ya wanted

Yeah, I have the Ingersoll one and it doesn't work very well at all... The tip is garbage, hopefully this seals better. The grease fittings in the Proto guns are at a funny angle so if it's not perfect they don't take grease. I needed to get a needle fitting anyway.

 

[kyrbz]

Just recently got a Repton concave/convex radius turner for my metal lathe. Haven't done any projects yet, but just a quick test doing a covex cut. Seems to do a pretty nice job. The reason I liked the Repton over some of the other commercially available ball cutters is it has a little more size capacity and has the ability to do concave cuts in addition to convex balls.

 

[Kenskip1]

]My latest addition

 

[bobbycos]

Just picked up 3/8ths 18volt lithium Snap on electric impact in orange.
Also got the long metric Allen sockets
Standard Allen sockets
Torx long sockets from snap on also.
Got very good deal on it.
Picked up surr egr port cleaning kit

Sent from my iPhone using Tapatalk

Pretty sure that's a 1/2 drive

Pretty sure you are wrong

http://buy1.snapon.com/catalog/item...roup_ID=760609&store=snapon-store&dir=catalog

Simple Google search ,it's the 3/8" drive

 

[Cheechmaster]

My new Wera 1/4 Ratchet. Going to order the 3/8 next. So nice


adult photo sharing

:supergay:

 

[Crown Imperial]

I like them too and I have only just got them, thanks to eBay they work out to about £30 for the pair delivered, or about $48. Sometimes eBay auctions get you a real bargain.

Holy **** that's a great deal.
I would have gotten them too for that price.
I only see them for $70 each on ebay uk.

 

[Hafen_Kafer]

Kershaw knifw with 1/4 hex bit holder. With enough couplers you can get to any bolt.

 

[veks]

Here are my new Snap-On pickups. Love black and red.

really nice picture.

 

[Hpozzuoli]

portable table saw and stand.

 

[MagnumForce]

I have something similar for my dynabrand grinder.

 

[spoon671]

really nice picture.

Thanks man! Lots of contrast there...Snap-On, Hazet, Porsche, more Snap-On, there's Stahlwille hidden in there too somewhere I think.

 

[Ruger_556]

Flaring tool, the aw-**** kit, and a strap wrench...

 

[90zcar]

Snap on XDHFM1415....14 and 15mm zero offset long wrench



Sent from my iPhone 5s using Tapatalk

 

[Frank Dukes]

portable table saw and stand.

jealous. my next big purchase right there..

 

[arms1970]

Simple Google search ,it's the 3/8" drive

Just bought one yesterday actually. Haven't used it yet. Got 40 bucks off instead of a free jacket. Got 2 already.

 

[bsaint]

 

[zmotorsports]

Just recently got a Repton concave/convex radius turner for my metal lathe. Haven't done any projects yet, but just a quick test doing a covex cut. Seems to do a pretty nice job. The reason I liked the Repton over some of the other commercially available ball cutters is it has a little more size capacity and has the ability to do concave cuts in addition to convex balls.

Nice radius tool. What Grizzly lathe is that? Looks fairly new.

Mike.

 

[Drake9]

Just got these in the mail

 

[56rpm]

Just recently bought this Miller Diversion 180 tig. Nice machine for my needs. Quite different from my previous tigs, Miller Synchrowave 180 and a Linde 305.

 

[kyrbz]

Nice radius tool. What Grizzly lathe is that? Looks fairly new.

Mike.

Its a G0602. I've had it for probably 5/6 years. Despite it's clean appearance, it's served me well through numerous projects. Typical Grizzly machine, it had some minor issues when I first set it up. Main issue was it had some stripped threads where the motor attaches to the carriage casting which was causing the alignment of the motor to slip resulting in belt tracking problems. The forward/reverse switch went bad after 2 years. Other than that I've been pretty happy with it. Since I bought it they've come out with a variable speed version.

Cutting some metric threads for a custom M21 x 1.5 puller I needed for an oddball Italian motorcycle

 

[dutchgray]

View media item 45033Some new old stuff
Unused Peterson Vise Grips, no idea how a K mart labeled box got to the UK but I'm not complaining, these are not exactly common here pre Irwin.
Nice English Picador drill gauge, metric in .1 increments to 6mm with quarter sizes as well, also marked decimal imperial sizes.
Snap on flare crows feet, 2 1/8" and 2 3/16".
All unused and all cheap, also got a few wrenches and sockets not pictured.

 

[bobbycos]

Snap on XDHFM1415....14 and 15mm zero offset long wrench



Sent from my iPhone 5s using Tapatalk

I just warrantied mine, the 14mm end cracked due to an idiot CO-worker of mine,

 

[90zcar]

I just warrantied mine, the 14mm end cracked due to an idiot CO-worker of mine,

Haha I got to hear this story. 10foot cheater pipe?


Sent from my iPhone 5s using Tapatalk

 

[the.wong.kid]

Picked up a snap on 3/8 tech angle torque wrench, came with the new season snapon winter jacket... running out of room with these damn winter jackets

Sent from my SCH-I545 using Tapatalk

 

[Jwych]

Picked up a snap on 3/8 tech angle torque wrench, came with the new season snapon winter jacket... running out of room with these damn winter jackets

Sent from my SCH-I545 using Tapatalk

if they are 2xl your can send one my way lol