MAC seal picks, mid length, and extra short sockets.
Yet another 3/8 ratchet because well, one can never have too many
love it
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
love it
So I'm at NAPA I wanted a ratchet for my gear wrench sockets He told me it was $43.00 I thought Wow!!! I see the whole set for $ 38.00 on sale why didn't tell me this. I see this standing in line. GRRRRRRRRRRR Yes I got the set.
James
James
Picked these up for during AAP coupon (50 off 125) with a few other things, making them 67 a piece after tax.
<a href="http://s290.photobucket.com/user/sbyrne92/media/IMG_20150121_201400621_HDR.jpg.html" target="_blank"><img src="http://i290.photobucket.com/albums/ll248/sbyrne92/IMG_20150121_201400621_HDR.jpg" border="0" alt=" photo IMG_20150121_201400621_HDR.jpg"/></a>
<a href="http://s290.photobucket.com/user/sbyrne92/media/IMG_20150121_201400621_HDR.jpg.html" target="_blank"><img src="http://i290.photobucket.com/albums/ll248/sbyrne92/IMG_20150121_201400621_HDR.jpg" border="0" alt=" photo IMG_20150121_201400621_HDR.jpg"/></a>
used snapon techwrench 1/2 inch digital torque wrench...got it for a steal cuz my snap on guy had had it for a while...
looks good. what's a steal??
You guys are killing me. I need to look at CDI.
the black one with all the leds onto it? ****...too bad it's like a 13 hour drive to the border of az from where i am...much less farther into the state haha
upshot is i get to pay mine off for 10 weeks no interest though
hmm.... i'll have to check that out.
used snapon techwrench 1/2 inch digital torque wrench...got it for a steal cuz my snap on guy had had it for a while...
I have the exact same one, it rocks!
. And as far as I'm concerned you **** compared to what I paid for it new 7-8 years ago.I have to tell you don't use the new one,,,,,you will never like yours again!!!I have the exact same one, it rocks!
I have all three now, love it never look back
James
Last edited:
The LED indicators on the new Techangle and the Control Tech wrenches are awesome when you're reaching into a tight spot
devoncoolman
Well-known member
Id have to agree the new one is way better then the old one. Traded mine in for the new one and don't regret it.
geojag
Well-known member
I have been impressed with the Knipex I have bought recently so I acquired some more:
CarsonConcepts
Well-known member
So I'm at NAPA I wanted a ratchet for my gear wrench sockets He told me it was $43.00 I thought Wow!!! I see the whole set for $ 38.00 on sale why didn't tell me this. I see this standing in line. GRRRRRRRRRRR Yes I got the set.
James
What's the part number on that set?
EDIT: Found it 893823
~ Carson
Last edited:
The LED indicators on the new Techangle and the Control Tech wrenches are awesome when you're reaching into a tight spot
No ****?..........nawww shudd up, you guys are just trying to make me go broker ain't cha.
F!, now you got my curiosity going. Damn you guys.
What's the part number on the 3 piece Snap on stuff?
Had a gift card for Matco, so I got these
All this is from a while back
Got a Drill Press, I was debating if I would actually use it much. Had it 2 days now and yes now know it was a good buy. A engine leveler, as got to pull the engine and gearbox out of a car soon.
And as it was the VAT free day treated my self to a new impact too
And as it was the VAT free day treated my self to a new impact too
Tronyadorable
Banned
- Joined
- Sep 25, 2014
- Messages
- 1,170
Hey Hesk. Get a drum sanding kit for the drill press.
" Hint"---within a year you'll have at least 2 drill presses...maybe more
" Hint"---within a year you'll have at least 2 drill presses...maybe more
thanks man. Its been a while since I've posted in this thread. All the stuff was bought in the past months.
Whats the Mercedes Box thing?
Its a charger for my phone.
Ill let you know when I go to work.
bsaint
Well-known member
Dude.. that blows.
crawl around on the floor at his height and you might get lucky.
Yea I gotta find the random hole in the shop he thought it would be good to put it.
I remember showing him the swivel head and he was into it. Then he comes over like a half hour later and says "All gone." Not remembering what he had I gave him something else to play with. A week or so Im looking all over for it then remember what I did!
MemphisR32
Well-known member
- Joined
- Oct 9, 2014
- Messages
- 155
Picked up a Streamlight Stylus Pro to carry daily and a 36mm oil filter socket I have been needing.
Also got a DeWalt heated jacket for my dad who is outside all day as a contractor.
Also got a DeWalt heated jacket for my dad who is outside all day as a contractor.
Syntax_Error
Well-known member
Picked up a Streamlight Stylus Pro to carry daily and a 36mm oil filter socket I have been needing.
Also got a DeWalt heated jacket for my dad who is outside all day as a contractor.
I dont know how cold it gets in your area but as a contractor in the cold I own a heated hoodie. Take into account if your dad wears a hoodie under his coat. If he does the heating zones will never reach your body. I find that the hoodies are decent at keeping you warm only if you wear a single shirt under it and buy the heated garment a size small for you so it hugs your body more and the heating elements make better contact and keep you warm. The coats are useless in the Iowa winter as most people here will wear another layer under their coat.
Indexmill
Well-known member
Picked up a Streamlight Stylus Pro to carry daily and a 36mm oil filter socket I have been needing.
Also got a DeWalt heated jacket for my dad who is outside all day as a contractor.
The Streamlight Stylus Pro is an awesome flashlight for the shop. To make it even more awesome, simply add a short piece of rubber or plastic tubing to the end cap so you can easily and comfortably hold it in your teeth when you need both hands to do what you are doing. I used a 1/2" long piece of 1/2" ID clear vinyl hose from Ace.
xworkdogx
Active member
^^^nice^^^
James
oh yes don't worry I have been looking at these
I have to say this form has pushed me down a very slippery slope
JBradley500
Well-known member
- Joined
- Jul 19, 2013
- Messages
- 781
I'm glad they made it! I think they found a better home.
Tronyadorable
Banned
- Joined
- Sep 25, 2014
- Messages
- 1,170
what's the model on the keyboard ? I need a new one.
hdossett
Well-known member
Picked up a Porter Cable Combo cordless drill driver/impact driver Model #: PCCK602L2 @ Lowes yesterday. $149 - 10% Vet discount. Has been $179. Been wanting something like this for a while, saw the price and bit the bullet! Should handle all the work I want to do!
H
H
Attachments
what's the model on the keyboard ? I need a new one.
this thing is old as can be... i'm sure i've had this thing for more than 10 years now
that hammer looks exactly like my blue point 32oz huess vaughen make them