Show your new tool arrivals

Jarhead0408 · Jan 27, 2015

Very nice. Mind if I ask where you bought the SK set from and for how much?

Jon.R · Jan 27, 2015

The best flare tool set money can buy. I work on a fleet of 97 school buses in northern Ontario Canada and the salt on the roads rut out brake lines with in a couple years. Each bus has prob almost a 100 feet of line and that flaring tool saves me a lot of time. Just flare the lines right under the bus. Also does fuel lines.

ninjamunky85 · Jan 27, 2015

Jarhead0408 said:
Very nice. Mind if I ask where you bought the SK set from and for how much?

$60 from ebay http://www.ebay.com/itm/230658218380?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

Turns out I coulda got the set a little cheaper from amazon though.

wagzilla · Jan 27, 2015

abvw said:
Don't know why I bought it, but it'll come in handy one day...

https://scontent-b-ord.**.fbcdn.net/hphotos-xpf1/v/t1.0-9/1486659_10202673004259894_6620809938265005015_n.jpg?oh=414aaaecf8d2357f9e50805fcc5785d0&oe=55691CBA

Love that set, and you don't have to do it that hard easy does it!!

James

xworkdogx · Jan 27, 2015

Been wanting one for a while now. Love promos

AA/FC · Jan 27, 2015

I ran across some 6 point 5/16 drive shaft bolts the other day on a truck. My 12 point wrench just spun on 2 of the 4 bolts, and no room for a socket..... when I got home that night I ordered this wrench. A 5/16, 6 point long pattern S-K wrench. I already own 2 of these wrenches in my tool box, this new wrench is for my mobile tool set. The chrome on this thing is excellent.

zzzz · Jan 27, 2015

I think I might order some sk stuff soon. How is the quality control these days?

twertsy · Jan 27, 2015

Caleb T said:
That's a hydrolic flaring tool. They are flippin' amazing! I LOVE them and want to purchase one some day...

I bought one recently. Put all stainless brake lines I my '70 Goat....it was a lifesaver!

JBradley500 · Jan 27, 2015

What part number is that sk wrench? I have a 6 point proto wrench just for those driveshaft bolts but it's much shorter than that.

vincentshumai · Jan 27, 2015

New Knipex Linesman

JonDick13926 · Jan 27, 2015

twertsy said:
Nice I ordered these from Amazon on 12/18...........they haven't even shipped yet

Was it from Amazon or from a third party seller? Regardless, I'd be contacting the seller unless the item said something along the lines of "out of stock, will ship when available" when you placed the order.

JonDick13926 · Jan 27, 2015

Got this in from an eBay seller today. Nice quality. Made in France. There are two left if anyone wants one. I just stole the eBay picture so that I didn't have to take one.

http://www.ebay.com/itm/170993356156?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

AA/FC · Jan 27, 2015

JBradley500 said:
What part number is that sk wrench? I have a 6 point proto wrench just for those driveshaft bolts but it's much shorter than that.

Yeah, this is a long pattern wrench.

JBradley500 · Jan 27, 2015

skulldrinker · Jan 27, 2015

Harbor Freight Flex Heads.

MrJason · Jan 27, 2015

AA/FC said:
I ran across some 6 point 5/16 drive shaft bolts the other day on a truck. My 12 point wrench just spun on 2 of the 4 bolts, and no room for a socket..... when I got home that night I ordered this wrench. A 5/16, 6 point long pattern S-K wrench. I already own 2 of these wrenches in my tool box, this new wrench is for my mobile tool set. The chrome on this thing is excellent.

Thanks for the lead on this, this would work great for barrel valve adjustments for my injection. Small wrenches don't fit well in my hands.

Jason

90zcar · Jan 27, 2015

Brand new $14 bux on ebay

ImageUploadedByTapatalk1422420112.638658.jpg

Sent from my iPhone 5s using Tapatalk

AA/FC · Jan 27, 2015

MrJason said:
Thanks for the lead on this, this would work great for barrel valve adjustments for my injection. Small wrenches don't fit well in my hands.

Jason

It would be perfect for that. When I worked on funny cars that was the Crew Chief's job to adjust the barrel valve. I've never made the adjustments, but I've watched the CC do it a thousand times. :lol:

MrJason · Jan 27, 2015

AA/FC said:
It would be perfect for that. When I worked on funny cars that was the Crew Chief's job to adjust the barrel valve. I've never made the adjustments, but I've watched the CC do it a thousand times.

I knew you'd know that language! You wouldn't by chance have the SK part number would you?

AA/FC · Jan 27, 2015

MrJason said:
I knew you'd know that language! You wouldn't by chance have the SK part number would you?

Yep, 88610.

I am considering a trip to Bakersfield for the MM this year.... go see some friends and smell some nitro. :beer:

MrJason · Jan 27, 2015

AA/FC said:
Yep, 88610.

I am considering a trip to Bakersfield for the MM this year.... go see some friends and smell some nitro. [emoji481]

If you do hit me up, I'd be good to meet you. I'll be there, got a few buddies running there. My sand drag season starts in 2 weeks.

Thank you for your help! [emoji481]

AA/FC · Jan 28, 2015

MrJason said:
If you do hit me up, I'd be good to meet you. I'll be there, got a few buddies running there. My sand drag season starts in 2 weeks.

Thank you for your help! [emoji481]

Will do... Hopefully your season gets off to a good start.

MechanicNamedJohn · Jan 28, 2015

A few new items... Sunex metric stubbies, blow guns, Mac battery charger/maintainer, Mac battery analyzer, Lang DVOM with temp sensor & inductive pick up, Auetl 5.5mm borescope for my MaxiSys, Hantek oscilliscope, some pressure transducers I built for the scope, Mac basic test light, 3M protective eye wear, magnets, and small lights.

ChrisLS8 · Jan 28, 2015

Stopped at Sear and HF today

Picked up a set of

-Groovelocks
-Hose picks
-Long Pin punches
-Hose pliers- let a friend borrow and he ended up keeping them
-Double Flex 3/8 Ratchet
-Small set of combo stubbies- this was a brand new case and COO is taiwan which is new for combo wrenches from HF

Boxheadmr · Jan 28, 2015

rocket1420 said:
Some new pliers for work. Cheap at Amazon right now.

Thanks for the heads up. Just ordered a set as well

moto440rider · Jan 28, 2015

Won these from my local tool guy he had raffle going. And I actually one something for once after all the money I spend lol.

Sent from my iPhone using Tapatalk

SASORacing · Jan 28, 2015

This is the new wireless Bluetooth speaker system I just bought. it came with a optional 3.5mm audio port as well. But the battery life is very good, 8 hours!

Very loud, I like this thing a lot, very good sound quality for the tiny size.
Only $36

http://www.amazon.com/gp/product/B00NE7SASU/?tag=atomicindus08-20

Faisal · Jan 28, 2015

90zcar · Jan 28, 2015

SASORacing said:
This is the new wireless Bluetooth speaker system I just bought. it came with a optional 3.5mm audio port as well. But the battery life is very good, 8 hours!

Very loud, I like this thing a lot, very good sound quality for the tiny size.

Only $36

http://www.amazon.com/gp/product/B00NE7SASU/?tag=atomicindus08-20

Does it have a built in am/fm tuner for a radio?

Sent from my iPhone 5s using Tapatalk

SASORacing · Jan 28, 2015

rocket1420 said:
How's the sound quality? It doesn't matter to me much how loud it gets.

How's the build quality? Would it survive my dad kicking it and/or dropping it at least once a day?

I take it the battery is built in? Is it lithium?

Very good sound, even at high volume, it doesnt get distorted. Not very bass'ey obv. because its small, but clarity is great.
The outside is a rubber/ matte. I chose red over black because it matches my tool box, and red wont show dust like black.
8 hour rechargable battery.

90zcar said:
Does it have a built in am/fm tuner for a radio?

Sent from my iPhone 5s using Tapatalk

Yeah am fm i think. alarm clock, battery indicator. 3.5 audio port. And can charge by any usb cable or port.

wagzilla · Jan 28, 2015

MechanicNamedJohn said:
A few new items... Sunex metric stubbies, blow guns, Mac battery charger/maintainer, Mac battery analyzer, Lang DVOM with temp sensor & inductive pick up, Auetl 5.5mm borescope for my MaxiSys, Hantek oscilliscope, some pressure transducers I built for the scope, Mac basic test light, 3M protective eye wear, magnets, and small lights.

Auetl 5.5mm borescope how long is that and do you have a better pic?

thanks
James

AndrewV · Jan 28, 2015

MechanicNamedJohn said:
A few new items... Sunex metric stubbies, blow guns, Mac battery charger/maintainer, Mac battery analyzer, Lang DVOM with temp sensor & inductive pick up, Auetl 5.5mm borescope for my MaxiSys, Hantek oscilliscope, some pressure transducers I built for the scope, Mac basic test light, 3M protective eye wear, magnets, and small lights.

Good video(s) on the oscilloscope mnjohn. Any closer pics of the sets shown?
I just picked up the spark anyllizer, and antivibe ball pein set. More than happy.

90zcar · Jan 28, 2015

SASORacing said:
Very good sound, even at high volume, it doesnt get distorted. Not very bass'ey obv. because its small, but clarity is great.

The outside is a rubber/ matte. I chose red over black because it matches my tool box, and red wont show dust like black.

8 hour rechargable battery.

Yeah am fm i think. alarm clock, battery indicator. 3.5 audio port. And can charge by any usb cable or port.

Awesome. So much stuff now days doesn't have am/fm and is only meant for iPods/phones. This annoys me as I am old school and would rather just turn on the radio and call it a day

Sent from my iPhone 5s using Tapatalk

AndrewV · Jan 28, 2015

Faisal said:

Nice finds Faisal.

oak_park · Jan 28, 2015

Bottle openers are tools right?

Jarhead0408 · Jan 28, 2015

And Faisal scores again!

Nice finds my friend. You are building quite a nice cross section of various Craftsman ratchets across many eras.

cashishift · Jan 28, 2015

oak_park said:
Bottle openers are tools right?

VetoPac bottle opener/keychain and stickers from 2015 AHR Expo in Chicago yesterday. Got to meet company founder Roger Brouard, real nice guy, and play with all their various bags. I already have a Veto LC.

I wish they had a factory seconds outlet..

Faisal · Jan 28, 2015

Jarhead0408 said:
And Faisal scores again!

Nice finds my friend. You are building quite a nice cross section of various Craftsman ratchets across many eras.

thanks

Cope · Jan 28, 2015

cashishift said:
I wish they had a factory seconds outlet..

They don't make seconds!

logixjock · Jan 28, 2015

Got a "wireless" test light last week, it rated for 12vdc but works up to 24vdc and is perfect for I/O testing in the field.

Got the 1/4" drive metric semideep with free flex QR ratchet deal this week. Also got him to toss in a set of the new tankards with a set of 1/4" wobble+ extensions.

I've never used the wobble+ before today and I already love them after one use. I'll be getting a set of 3/8" drive soon.

Show your new tool arrivals

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Attachments

Well-known member

Attachments

Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments