Show your new tool arrivals

[jonti48310]

I got a few things this week;
TEKTON 2910 1/2-Inch Drive Manual Hand Impact Driver Set, 7-Piece
and EZ RED KWP2 Kiwi Set, 2-Piece

and the next is Armstrong 25-675 11 Pc. 12 Point Full Polish Extra Long Combination Wrench set SAE. I paid $40 for it.


I hope the kiwi pliers work better than they look though. The fit and finish is horrible. The points don't meet either. There isn't and noticeable looseness though. I guess I will see.

Hey sleepy, let me know how you like that impact driver if you don't mind. I've been eyeing it for a while but am always to scared to pull the trigger.

 

[92integra]

bobbycos------------> what is the tool in the bottom of this pic?http://s220.photobucket.com/user/rc.../2015-04/20150430_231922_zpsnxgugoc0.jpg.html

is that a bore scope of some sorts ive really been wanting one lately but can't spend the money on a high dollar one like the S.O.

 

[bigphillystyle]

bobbycos------------> what is the tool in the bottom of this pic?http://s220.photobucket.com/user/rc.../2015-04/20150430_231922_zpsnxgugoc0.jpg.html

is that a bore scope of some sorts ive really been wanting one lately but can't spend the money on a high dollar one like the S.O.

I might be wrong, but to me it looks like a bluetooth earpiece being charged

 

[sam.coll]

New Makita brushless kit, 100 year anniversary edition drill and impact driver in metallic blue with 2x 5.0Ah batteries

 

[Jure]

3/8 to 1/4 and 1/4 to 3/8

 

[clutch93]

some sockets, crows feet, ratchets, rails, magnets, snap ring pliers,
im building up my 1/4" and 3/8" drive sets, drawers nice and organized now

Did those impact socket organizers come with the sockets or did you source those elsewhere?

 

[txusa03]

3/8 to 1/4 and 1/4 to 3/8

linky?

 

[Jure]

linky?

U.S.A.. Unior USA Corporation. 3550 N. Union Drive Olney, IL 62450. Contact person. Ms. Sharon Elliott. Tel.: 618 393 29 55. Fax: 618 393 29 56.
[email protected]

price is around $3 for 1/4-3/8 and around $3.5 for 3/8-1/4

www.unior.com

 

[littleponderosa]

500.00

major **** right there. priced an abused one several years ago and they wanted $1K and missing dies.
Bill

 

[Olson Boy]

https://scontent-mia1-1.**.fbcdn.net/hphotos-xpf1/t31.0-8/11055371_10152855530321332_8457820955530493976_o.jpg?efg=eyJpIjoidCJ9

 

[jeopardy98]

Okay, okay. More info please.

 

[PelicanPines]

https://scontent-mia1-1.**.fbcdn.net/hphotos-xpf1/t31.0-8/11055371_10152855530321332_8457820955530493976_o.jpg?efg=eyJpIjoidCJ9

Omg... I have that exact sink.

 

[Olson Boy]

Dual 80 Snap On display ratchet. My driver got tired of moving it around so he handed it over to me.

 

[Jure]

Dual 80 Snap On display ratchet. My driver got tired of moving it around so he handed it over to me.

made of plastic or?

 

[Olson Boy]

Yes, it's plastic. It actually works also. Has a piece of plexi glass so you can see how the internals work.

 

[Jure]

Yes, it's plastic. It actually works also. Has a piece of plexi glass so you can see how the internals work.

that's cool hang it on the wall,it will look awesome

 

[djwyman]

https://scontent-mia1-1.**.fbcdn.net/hphotos-xpf1/t31.0-8/11055371_10152855530321332_8457820955530493976_o.jpg?efg=eyJpIjoidCJ9

That's one big ratchet

Sent from my XT1095 using Tapatalk

 

[FANTM58]

OH hell i though it was a really small tool box !!

 

[AmishFury]

had some points that were about to expire... fun facts...

1. i also ordered a 3/8" adapter... item page said available today, won't be in until the 19th... checked the tool section and they have one on the shelf but i didn't want to press the issue since it took forever for them to find the items and i was tired of standing around waiting

2. the phillips bits... click for the details

 

[aidindog]

Sent from my iPhone using Tapatalk

 

[Viggen337]

This is my first post outside my intro thread, so I'm not sure if I'm the first one on here to own one of these or not. After hearing about it last year I've been nagging DeWalt for more info and getting dead ends through multiple retailers and cancelled orders, but I finally got my hands on one:



The DeWalt DCF899! It was delivered last week and it is a BEAST. I've always used air impacts in the past because the electric ones that are capable enough for my needs were also way out of my price range. I already used it to change the front wheel bearing and hub assembly on my V8 4Runner and I was very impressed. I'm never going back to my air impact wrench.

I bought the bare tool because I already have a decent collection of 20V Max tools, but if I wind up using this as much as I think I will, I'll get a pair of the 5Ah XR batteries that came with the kit. I skipped the kit because of the soft-sided carrying bag and the $450ish price tag. Kit boxes or tough cases only for this guy, so this one is staying in the air tool drawer until I find a better place or buy a case that is worthy!

 

[Strouty]

Those are pretty slick tap holders.

 

[aidindog]

They are great for model making and precise engineering also any where with tight space


Sent from my iPhone using Tapatalk

 

[bobbycos]

bobbycos------------> what is the tool in the bottom of this pic?http://s220.photobucket.com/user/rc.../2015-04/20150430_231922_zpsnxgugoc0.jpg.html

is that a bore scope of some sorts ive really been wanting one lately but can't spend the money on a high dollar one like the S.O.

I might be wrong, but to me it looks like a bluetooth earpiece being charged

winnerv winner steak dinner

 

[doan]

New Makita brushless kit, 100 year anniversary edition drill and impact driver in metallic blue with 2x 5.0Ah batteries

Makita fan here , those look awesome. The 5.0 stuff is not marketed in the U.S. Yet.

 

[Horror Business]

Leatherman Skeletool.

 

[Rogue1987]

https://scontent-mia1-1.**.fbcdn.net/hphotos-xpf1/t31.0-8/11055371_10152855530321332_8457820955530493976_o.jpg?efg=eyJpIjoidCJ9

I've got one of those as wells. Did yours come with the display stand it sits on? Gets a lot of notice in my office.

Sent from my SM-G900V using Tapatalk

 

[littleponderosa]

New Blue Point hose pinch pliers

1st wobble extensions, only bought a couple to see if I like

Both size goofy *** sparkplug sockets for the scooters

Last size to complete the sae flare nut wrenches

 

[Olson Boy]

I've got one of those as wells. Did yours come with the display stand it sits on? Gets a lot of notice in my office.

Sent from my SM-G900V using Tapatalk

Yes, it came with the stand.

 

[xurusaibobx]

This is my first post outside my intro thread, so I'm not sure if I'm the first one on here to own one of these or not. After hearing about it last year I've been nagging DeWalt for more info and getting dead ends through multiple retailers and cancelled orders, but I finally got my hands on one:



The DeWalt DCF899! It was delivered last week and it is a BEAST. I've always used air impacts in the past because the electric ones that are capable enough for my needs were also way out of my price range. I already used it to change the front wheel bearing and hub assembly on my V8 4Runner and I was very impressed. I'm never going back to my air impact wrench.

I bought the bare tool because I already have a decent collection of 20V Max tools, but if I wind up using this as much as I think I will, I'll get a pair of the 5Ah XR batteries that came with the kit. I skipped the kit because of the soft-sided carrying bag and the $450ish price tag. Kit boxes or tough cases only for this guy, so this one is staying in the air tool drawer until I find a better place or buy a case that is worthy!

where did you get it from? am looking for the hog ring model. looks like ony CPO has it instock

 

[sam.coll]

Makita fan here , those look awesome. The 5.0 stuff is not marketed in the U.S. Yet.

Same here man I pretty much only buy Makita, wow really its been here in Aus and New Zealand for quite a while maybe even over a year

 

[Jarhead0408]

Sent from my iPhone using Tapatalk

That's pretty cool man. Do you have a link?

 

[aidindog]

Would you like one?its Bordo 1/4 inch tap handle I paid 70$ for it .


Sent from my iPhone using Tapatalk

 

[aidindog]

https://www.vektools.com.au/bordo-t...change-ratchet-tap-wrench-m2-m12-p-12108.html


Sent from my iPhone using Tapatalk

 

[Jarhead0408]

Would you like one?its Bordo 1/4 inch tap handle I paid 70$ for it .


Sent from my iPhone using Tapatalk

https://www.vektools.com.au/bordo-t...change-ratchet-tap-wrench-m2-m12-p-12108.html


Sent from my iPhone using Tapatalk

Yeah I'd love to own one, but at that price I'll have to wait a while. Very nice looking tools though! Thanks for the link as well. I'll put it to use in the future.

 

[Jure]

3/8 to 1/2 for torque wrench

 

[Viggen337]

where did you get it from? am looking for the hog ring model. looks like ony CPO has it instock

I finally found one through Acme Tools, and the last time I looked they had it on their Amazon page. I originally tried getting the hog ring model (DCF899HB) through CPO when they claimed to have it "in stock", and I went through enough **** with them to never want to deal with them again.

When I found the detent pin version, I jumped on it. I've never had that kind of impact, but now I'm glad I bought it. I prefer it to the hog ring at this point. It's not difficult to get the sockets off if you don't line up the hole and the pin, and the socket is more secure than most of the hog ring impacts I've had in the past.

It looks like the one I bought is out of stock at Acme. But it looks like they have the DCF899HB:

http://www.acmetools.com/shop/mobile/tools/dewalt-dcf899hb

They also seem to have a few of the kits in stock now. If you search their site for "DCF899" you'll see all 5 options listed.

Sent from my Note 3 using Tapatalk

 

[MattySXE]

A few new pickups from last Saturday:

Yesterdays acquisition:

And just got home with these:

 

[rmalkow2]

A few new pickups from last Saturday:

For a minute there I was not sure if you were bringing home coffee and Craft Beer or tools. But either way it looks like you had a good time.

 

[MattySXE]

For a minute there I was not sure if you were bringing home coffee and Craft Beer or tools. But either way it looks like you had a good time.

Always coffee and always craft root beers... yeah, I said root beers