cliftonbros89
Well-known member
I'm considering getting at least the straight short one if not another set for my service truck box. Probably need green though instead of red
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
I'm considering getting at least the straight short one if not another set for my service truck box. Probably need green though instead of red
cliftonbros89
Well-known member
In addition to the Klein electrical pliers for the service truck box, and the snap on stuff for the shop box I purchased this week and posted yesterday I made another purchase. I needed some tools in the box for my "weekend truck". Just in case I'd have problems on the road. 
Decided to give Masterforce a chance with a 1/4 & 3/8 socket set, stubby screwdrivers, spark plug socket, also picked up a Wilde punch & chisel set. All USA made except for the Empire brand feeler gauges I picked up.
Decided to give Masterforce a chance with a 1/4 & 3/8 socket set, stubby screwdrivers, spark plug socket, also picked up a Wilde punch & chisel set. All USA made except for the Empire brand feeler gauges I picked up.
Jarhead0408
Well-known member
Dude that box is gorgeous. Reminds me of an old Belair.
WMS PERFORMANCE
Well-known member
hello
the ratchet will be the worst part of that set... it's pretty much a cman rp
it's amusing that the lower tier house brand (performax) has nicer ratchets than their flagship brand
cliftonbros89
Well-known member
Yeah I already found that out. Wasn't to impressed with it. Luckily I've got another ratchet I can stick in there that's a little better.
Dave455
Well-known member
Also went to the Snap On truck and picked up a seal pick set, PBKP12A multi-position pry bar, and FCF72 3/8 ratchet. Already used the ratchet and really like it!
Wow!
Didn't know those pry bars were available! That looks seriously useful!
I need to pay more attention to the catalogue!
cliftonbros89
Well-known member
I honestly didn't know that either. I never remember seeing it in the catalog. But it was the only one on the truck. I figured it'd be useful so I snagged it. Even if though it was a little pricey.
NorthSea92
Well-known member
Needed a few more universal impacts, wish they did the larger sizes in 12pt
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Hey_Pontiac
Member
cgds92
Member
Moving Sale score...bunch of old Craftsman, bunch of Blackhawk, a few Elora, a couple Snappys & Matcos, a Williams, an Armstrong, a few SKs, a couple of Indestro's that seem pretty nice, and a bunch of ****. Plus a Proto that was made in Los Angeles. Plus 2 Williams C-Clamps. All for under $70.00
Anyone know anything about Fleet, Penncraft, Allenite, or KAL sockets?
Anyone know anything about Fleet, Penncraft, Allenite, or KAL sockets?
Last edited:
GreaseMonkey45170
Well-known member
- Joined
- Nov 24, 2013
- Messages
- 132
Sent from my iPhone using Tapatalk
Nik_95Cobra
Well-known member
- Joined
- Nov 18, 2008
- Messages
- 241
Got the new Snap-on electric 3/8 wrench today.
Also, I put a magnetic back on my personalized nameplate that came with the box, but I think I'm taking it back off since it looks out of place. I also ordered the polished magnetic "S" logo and put it on but not sure that I like it either and might take it off too and put it on the inside of the locker when it gets here.
Also, I put a magnetic back on my personalized nameplate that came with the box, but I think I'm taking it back off since it looks out of place. I also ordered the polished magnetic "S" logo and put it on but not sure that I like it either and might take it off too and put it on the inside of the locker when it gets here.
Last edited:
just a noob
Well-known member
- Joined
- Oct 24, 2013
- Messages
- 261
3/4 Set I ordered back in May showed up
K-Dog
Well-known member
Recent purchases.
What exactly is this ?
jobo1004
Well-known member
It's a bearing race and seal driver set.
http://www.harborfreight.com/10-piece-bearing-race-and-seal-driver-set-95853.html
Jarhead0408
Well-known member
Sent from my iPhone using Tapatalk
Hey man, Is the impact extension set made by S•K as well?
Strouty
Well-known member
3/4 Set I ordered back in May showed up
Nice!
dodge610
Well-known member
Hey strouty all moved in that new box yet.
Strouty
Well-known member
Sort of, I still need my liners for the extra drawers. I am not going to finish until I have all the liners. Right now there are still 10 empty drawers.
cliftonbros89
Well-known member
I may be able to find out if Napa will ever get it in for me. I ordered it plus a regular 36 tooth Armstrong and a metric socket set back in mid-June. Haven't seen it yet
i went to menards to buy trimmer line... started doing my usual stare at the tools for at least 20 minutes realized i have been using a 15/16 in place of a 24mm long enough... then remembered i needed a bit to drill a couple holes in some metal
and also bought junk food
Last edited:
Sort of, I still need my liners for the extra drawers. I am not going to finish until I have all the liners. Right now there are still 10 empty drawers.
I give you two months to fill those drawers
Merb
ATK305
Well-known member
i went to menards to buy trimmer line... started doing my usual stare at the tools for at least 20 minutes realized i have been using a 15/16 in place of a 24mm long enough... then remembered i needed a bit to drill a couple holes in some metal
and also bought junk food
I think a lot of people do that including me. For some reason it seems you end up with a sae set to 1" so you never really bother going above 21-22mm.
I'll continue to use my 15/16 wrench as a 24mm until I score a super cheap snap on 24 to match my set. Otherwise I'm not paying 60 some bux for one wrench lol
Sent from my iPhone using Tapatalk
GreaseMonkey45170
Well-known member
- Joined
- Nov 24, 2013
- Messages
- 132
SKT45674
Last edited:
Strouty
Well-known member
AV tinker er
Well-known member
I'm hooked on German tools
bad luck
Well-known member
neuralsnafu
Well-known member
New arrival. Lang brake caliper spreader
Best of all made in usa!
Sent from my SAMSUNG-SM-G900A using Tapatalk
Best of all made in usa!
Sent from my SAMSUNG-SM-G900A using Tapatalk
I'm a big Facom fan, and their ratchets are the best I've ever used,
but I've always hated the idea of adjustable length ratchets.
What is your opinion of this one..?
ToolmakerCT
Active member
RatchetMan
Well-known member
- Joined
- Sep 23, 2011
- Messages
- 199
That is awesome. I even like the color.