sam.coll
Well-known member
You certainly wont regret it! everything about them is nice, just a shame they are not more readily available in Australia.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
You certainly wont regret it! everything about them is nice, just a shame they are not more readily available in Australia.
Want so bad!!!!!
For work:
Dewalt t-staks
Cheap tools from princessauto for work:
Sears outlet center, 50% off all craftsman tools even at reduced pricing, for work, needed 3/4 and 15/16 specifically:
Pawn shop in Brampton, for home, all sizes sequential from 10-17, all German but 3 different brands, Gedore, Rashol, and VBW
Dewalt t-staks
Cheap tools from princessauto for work:
Sears outlet center, 50% off all craftsman tools even at reduced pricing, for work, needed 3/4 and 15/16 specifically:
Pawn shop in Brampton, for home, all sizes sequential from 10-17, all German but 3 different brands, Gedore, Rashol, and VBW
OCD
Well-known member
Torx T50Plus
Awesome blue point led light,
Promo gift from the tool truck man,
Ordered a Snap on air compressor too... 80 gal, 7hp, 23.5 cfm at 175 psi, dual stage, single phase!!
I was looking at a Tri max unit from another company that was $625 dollars cheaper, but Snap On Clint matched the price and offered free delivery right to my garage... So I went for it!! Should be here in a week or so!!
upgrading
Well-known member
BaMaDuDe87
Well-known member
Oooooo. Did you get those Felo's from KC Tool? How do you like the "Soft grip handle material"? Think it will hold up for awhile? I am this close to pulling the trigger on them.
MattVette89
Well-known member
Picked this up today. $15.99. Looks like these are the older style, superseded with a newer version.
flame broiled
Well-known member
Pick up a set of White handled screw drivers and a White ratcheting one for my new White box...
Carbonblk46
Well-known member
^ Wow that would be gray by the end of the week at my shop, Looks great though. What impacts are those Flamebrolied?
brandon523
Well-known member
Got package 1 of 3 from my Jet.com order. Everything was 20% off with a promo code at the time.
flame broiled
Well-known member
Carbon... I work on clean custom cars...if I am working on the dirty stuff I just use the black handle ones. The box stays fairly clean, just blow the dust off. There must be a reason most work trucks/vans are white.....
The Impacts are Makita.
upgrading
Well-known member
So that's why they call it "The Great White North" eh !
upgrading
Well-known member
Yes.
Handle feels good to me.
They are on sale right now and I bought the Plierswrench to get FS.
http://www.kctoolco.com/felo-neon-ergonic-6-pc-set-slotted-phillips-p/f62689.htm
JonDick13926
Well-known member
Two packages in one day. Bought a torx and metric hex bit socket set, along with a 3/8" Koken swivel extension, from Franks during the Columbus Day sale.
And got two sets of Snap On wrenches I'd been needing. FD+ reversible ratcheting wrench set and the long high performance double box wrench set, both metric.
And got two sets of Snap On wrenches I'd been needing. FD+ reversible ratcheting wrench set and the long high performance double box wrench set, both metric.
Armstrong 12-994. I really like it but I'm going to return it. Got it from home depot online but it's the older version that doesn't have the 88 tooth count. I'll be ordering another as soon as they come back in stock at HJE or somewhere like that.
Pick up a set of White handled screw drivers and a White ratcheting one for my new White box...
That white box looks awesome! If I was ever so out of my mind that I would buy a new box from Snap-On, I'd definitely get white.
Carbonblk46
Well-known member
He's got me tempted to get the white now. Looks very nice
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Grant Gunderson
Well-known member
Just finished a 2 week job in Switzerland, so figured I should pick up a little Bday present for myself while over there.
Now just gotta figure out how the heck to fit everything in the single drawer I have left for screwdrivers in my box.
Now just gotta figure out how the heck to fit everything in the single drawer I have left for screwdrivers in my box.
Last edited:
Got some new blades today since I have another project in the works. I figured I needed a higher tooth cut for the RAS.
Fedwrench
ALLIANCE MEMBER
Carbonblk46
Well-known member
Koken Zeal 1/4 drive super short 6 point socket set. sizes included: 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13,& 14mm. Very nice finish inside and out. Sockets compared to Matco shallow 10mm and snap on low profile 10 mm. From Frank's tools.
Those look like quality pieces, wonder if they make 3/8 version?
Yes they do, I have it. Never used it once. too shallow to be useful for my automotive needs. But they're pretty.
Carbonblk46
Well-known member
Seem to use my coworkers quite a bit on most the Jeep Wranglers that come into the shop. Some of the Exhaust bolts get tricky. Going to look them up so I dont have to borrow anymore
Chadwilliam1
Well-known member
I always thought those long 1/4 rats were silly but it seems like they would be very handy.
dede2897234
Well-known member
PureLeaf,
Can you specify which automobiles and which repairs you've tried the Ko-ken Z-eal sockets and were not able to use them since they're too shallow?
Thanks,
Dave
dede2897234
Well-known member
Like "uglyjacko", I was able to find and purchase tonight a set of those Bostitch long pattern combination wrenches (with the anti-slip open ends) for $15.00. It was an SAE 10 pc set that goes from 1/4" to 7/8". The Mayfield Hts, OH Wal-Mart had 3 more SAE and 2 more metric sets (10-19mm) after I picked up mine. The Bostitch wrench sets are made in China.
Dave
Last edited:
Love this thing, going to pick up the smaller version.
I think I've destroyed the last of my cheap hex keys so upgraded. Actually this set was extremely affordable, only around $13. Long overdue purchase.
These unfortunately weren't cheap. 29pc Set Titanium Nitride coated ThunderBits.
I think I've destroyed the last of my cheap hex keys so upgraded. Actually this set was extremely affordable, only around $13. Long overdue purchase.
These unfortunately weren't cheap. 29pc Set Titanium Nitride coated ThunderBits.
Love this thing, going to pick up the smaller version.
Where'd you buy the super scraper? I've been looking for one...
Ratchet Guy
Well-known member
If you like those, you'll love Chuck Coulter's.
Are those the same wrenches as the DeWalt's? Taiwan made? Damn Stanley really is the ***** of the tool world lol.
I might have to check the local wally world, I don't think I ever paid attention to there tool isle since I hate that store.
TheRobotCow
Well-known member
- Joined
- Dec 11, 2014
- Messages
- 176
Not mine its the wifes for her scrap booking stuff it was cheap real cheap way cheaper than any harbor freight cart
I have the same one but in orange, I absolutely love it.
Armstrong 12-994. I really like it but I'm going to return it. Got it from home depot online but it's the older version that doesn't have the 88 tooth count. I'll be ordering another as soon as they come back in stock at HJE or somewhere like that.
alternatively you could try to get an 88t rebuild kit... it's a drop-in upgrade
the bostitch combos are china...
bsaint
Well-known member
Hard to see but 120xp 3/8. So far its a great ratchet.
And my dealer had a trade in a hammer and get some money off so I traded in a hammer I got for free that Ive always hated and got this one.
And my dealer had a trade in a hammer and get some money off so I traded in a hammer I got for free that Ive always hated and got this one.
Coolabah
Well-known member
thegroundpounder99
Well-known member
Not mine its the wifes for her scrap booking stuff it was cheap real cheap way cheaper than any harbor freight cart
My driver was selling those dirt cheap also couple months ago. I got the wife a KR43(KRSC43?) and ended up getting myself the KRSC46 after that. It's not a bad pink actually.
Sent from my iPhone using Tapatalk