couple things from Amazon....
Have you had a chance to use the flexzilla extension cord yet? I am curious if they are as flexible as they claim to be.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Have you had a chance to use the flexzilla extension cord yet? I am curious if they are as flexible as they claim to be.
vartz04
Well-known member
I have a couple 12 gauge and a 100' 10 gauge that is currently running my shed. Even in the cold they are great. I never touch my other cords since buying these.
Sent from my iPhone using Tapatalk
Well, guess I will be spending some more money on one of these!
canuckian
Well-known member
good to know..... mine just arrived and the only experience i have so far was that it was still flexible when i took it out of the box that was left out in the cold
. Seems like a well made cord for sure
Mac 1/2" drive impact swivels from ebay, and one Snap On from the GJ classifieds. Piecing together truck brand sets on-the-cheap, as funds allow. Only have about $75 into them. Just need a 13/16" to complete the set.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
ca90ss
Well-known member
Couple things off the truck.
77Mini
Well-known member
Not NEW but new to me. Picked up a Milwaukee Rotary Hammer. It has definitely seen some use but a steel at $240. Will be perfect for jackhammering out the concrete in the garage to make the pad for my hoist and for drilling all my anchor holes.
one9gt
Well-known member
Couple things off the truck.
Those hose clamp pliers? If so, how much? And what's that socket bit?
Sent from my iPhone using Tapatalk
Jarhead0408
Well-known member
That socket looks like a drag link socket.
ca90ss
Well-known member
https://store.snapon.com/Non-Catalog-Items-RATCHETING-HOSE-CLAMP-PLIERS-P9769484.aspx
https://store.snapon.com/Product-Details-M1302A5-P635561.aspx
I bought the screwdriver bit for the drain plug on outboards and outdrives.
So I ended up returning the cheap HF long combo wrenches that I posted previously and getting these that cost eight times more. 
and some Bondhus tools..
and some Bondhus tools..
and some Bondhus tools..
Those stubby Bondhus hex keys... game changers. But base a design on their availability and you'll earn infamy, generations of scorn.
yeah, I need them to tighten the fasteners that mount some aftermarket Sparco seats in my car. The bracket and sliders mount so low and close to the floorpan, there is just no clearance to fit a standard L-wrench in there.
bry@n
Well-known member
So I ended up returning the cheap HF long combo wrenches that I posted previously and getting these that cost eight times more.
and some Bondhus tools..
Been thinking about getting those splines. Please let us know what you think of them after you use them
I've had those in my crosshairs (in the cart) a couple times, also. Just can't squeeze the trigger.
vartz04
Well-known member
New hammers. Not bad for $36
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
vartz04
Well-known member
vartz04
Well-known member
Yes. Find the thread on it you just pm the guy and he will set it up for you
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
hammersmadeinusa
Well-known member
New hammers. Not bad for $36
Sent from my iPhone using Tapatalk
Thanks for posting the photos. Always looking for feedback.
jerseykat1
Well-known member
I picked up a Sunex 3/8" swivel socket set. Click the picture for more info.
vartz04
Well-known member
I can't even really tell what's wrong with them. I spent only a short time looking them over but I would say this is one of the best deals out there. I'd have a hard time buying 3 of the same size hammers at harbor freight for less.
Sent from my iPhone using Tapatalk
youngunn2008
Well-known member
Charger for my small batteries, 5/8 magnetic spark plug socket I use for Cummins cng engines, sae flare wrenches, and used 3/8 long handle flex bent ratchet, which I got for $75 with a new grip off the truck
Rossco
Well-known member
Nice additions 'Younggunn'
Two more 4 ways and a Semi deep 1/4 drive AF set.
Two more 4 ways and a Semi deep 1/4 drive AF set.
FOCUS.FREAK
Well-known member
Amazon
Caliper hangers and metric 3/8 drive impact swivels
Hangers were like 10.99
Sockets were 57
Sent from my iPhone using Tapatalk
Caliper hangers and metric 3/8 drive impact swivels
Hangers were like 10.99
Sockets were 57
Sent from my iPhone using Tapatalk
atikovi
Well-known member
Muller wrench extender.
kunkernator
Well-known member
Got a few things in the mail today. From Amazon, some self fusing tape, and a VW 1.8t valve spring compressor. From Tooltopia, a pair of US made cylinder head stands, a Central Tools 24" straight edge, and some more Milton air fittings. And from an eBay auction I won, a Starett small hole gauge set.
On a side note, i would like to say how I have been loving Tooltopia lately. As long as it is over $75 it ships free, and i have been getting my orders in less than two days! I ordered this one monday evening. And Amazon has been slacking..... I ordered the self fusing tape and valve compressor last friday, and they were shipped via prime..,
Sent from my iPhone using Tapatalk
On a side note, i would like to say how I have been loving Tooltopia lately. As long as it is over $75 it ships free, and i have been getting my orders in less than two days! I ordered this one monday evening. And Amazon has been slacking..... I ordered the self fusing tape and valve compressor last friday, and they were shipped via prime..,
Sent from my iPhone using Tapatalk
jgreen-fsi
Well-known member
Ditto.
Sam'sAutoParts
Well-known member
Kind of a impulse buy at the auto parts stare today, but you can never have enough #2 Phillips.
You guys posting the new SO pry bars got my itch going today so I picked up a 30" bar 
The handle feels so nice.
And also got my T30 and T27 sockets repaired on the truck. Picked up 3" and 6" wobble extensions and the ECFHKY light. Love the thing so far.
The handle feels so nice.
And also got my T30 and T27 sockets repaired on the truck. Picked up 3" and 6" wobble extensions and the ECFHKY light. Love the thing so far.
dclassical
Well-known member
- Joined
- Sep 25, 2008
- Messages
- 1,130
If they missed the delivery target date write them and you will get a month of Prime for free.
dodge610
Well-known member
They have missed on my last three orders so for a $10.00 gift card and a free month of prime. I would much rather them to make there delivery date. Luckily the last thee orders have not been super important.
kunkernator
Well-known member
It is not that they are missing the delivery date, it is that they have been stretching it. For instance, if I am not logged in, an item that I am looking at will show as being able to ship out same day, and arriving in 5-7 days. If I log in (prime benefits), the SAME item will show as "additional 2-3 days processing required". They are stretching the two day shipping by adding additional processing time on their end, i.e., it is not USPS/UPS/FEDEX that is slacking, Amazon is. I I order something to be overnighted, I expect it to be shipped today and delivered tomorrow, not shipping next Thursday and arriving next Friday. Just my opinion.
02Xterra
Well-known member
-SAE set + Metric set for free, $42 thru sears.com
-SK tamper-proof torx-19769, used, thru amazon warehouse deals but they're perfect, still sealed for $30!
-USA Craftsman 10 & 12" adjustable wrench, $22 thru sears.com
Last edited:
02Xterra
Well-known member
OXT who's adjustables ? Look really decent.OOOPs Had to fix the size.
My bad! I should have re-sized my pics
Here's a link
http://www.sears.com/craftsman-2-pc...p-00944012000P?prdNo=1&blockNo=1&blockType=G1
pedrodagr8
Well-known member
- Joined
- Aug 25, 2013
- Messages
- 613
Kind of a impulse buy at the auto parts stare today, but you can never have enough #2 Phillips.
Do you know who makes those for SK? The tips kinda look like Western Forge (ala the old Husky Pro/Craftsman comfort grips)
