Show your new tool arrivals

[lightning02]

http://www.eastwood.com/eastwood-magnetic-toolbox-trays.html

$24 by itself..

i bought this bundle for $35 though http://www.eastwood.com/eastwood-magnetic-trays-and-toolset-kit.html

Thanks. Do they hold good?

 

[RivennHewn]

Battery jump box. 1000 amps.

Rated for 6.0L engines.

Nice to have in the truck, but mostly bought it for a little peace of mind while out in the boat.

There are cheaper versions, but they don't have the amps or engine size rating.

The clamps are really flimsy as well.

 

[MattVette89]

Got this Dorian toolholder for my lathe, and a couple inserts. Should work nicely.

If you or anyone else on here is interested, I have a ton of new and used lathe inserts to sell that I never got around to putting on eBay.

 

[02Xterra]

Thanks. Do they hold good?

Seem to! The small tray has 2 1"x 2" magnets, the longer one has 4 and the can/screwdriver tray has 8. I think they'll be plenty strong

Sent from my VS986 using Tapatalk

 

[M6erfan]

Battery jump box. 1000 amps.

Rated for 6.0L engines.

Nice to have in the truck, but mostly bought it for a little peace of mind while out in the boat.

There are cheaper versions, but they don't have the amps or engine size rating.

The clamps are really flimsy as well.

The NOCO clamps are flimsy?

 

[hangfirew8]

Battery jump box. 1000 amps.

Rated for 6.0L engines.

Nice to have in the truck, but mostly bought it for a little peace of mind while out in the boat.

There are cheaper versions, but they don't have the amps or engine size rating.

The clamps are really flimsy as well.

The amp rating is pure fiction. But don't sweat it, they all are, just like 5 HP ShopVacs that run on 110V/11A. If you want to know what the real rating is, look up the replacement battery specs, or have a battery shop test it.

-HF

 

[RivennHewn]

M6erfan,
The cheap ones have flimsy clamps, the NOCO are quite substantial.

Hangfire,
don't much care about the actual amps, it's still the most powerful unit of this size that I've seen.

If the 1000 amp rating is pure fiction, what do you think about the 300 amp units?

 

[Bruins63]

3 pc 84 tooth locking flex head gearwrench ratchets

 

[pescados666]

Not pictured was a wire brush and a pratt read awl $3.75
Wiss inlaid 1DS scissors 10 pairs @ $30
Two Piece Nut Splitter Set $5
10 or so new jig saw blades $3
20 or so new drill bits $8
18" pair of bolt cutters $5
https://scontent-dft4-2.**.fbcdn.net/v/t34.0-12/13942539_1129859050404621_557785512_n.jpg?oh=efdda0f918b8007cf920f496595c7dfb&oe=57B74456


Snap On YA450B, Protoco, 1/2" Drive Movable Pegs, 14 Pc. Socket Organizer two @ $6/ea

Armstrong 14pc 1/4" Drive Socket Set 10-943 Socket Driver, Adapter, & 12 Sockets $11.50

Lot of 2 Ball Peen Hammer: Proto 12.3oz & Vaughn 2lbs 5.5oz $10.69

Armstrong 66-580, 7 pc Ratcheting Screwdriver Set (feels better than any ratcheting screwdriver I've used before by far) $15.50

Reed Mfg Co RW10, 10" Steel Pipe Wrench, 1 1/2" Jaw $3.25

irwin hanson tap and die super set 41 pc $22

Blue Point FB-325A, 25 Blade Feeler Gauge $3.69

Barco Rocket hammer 16oz $2.25

26ct, 24T x 12" Hack Saw Blades Starrett Nicholson Lenox Great Neck, New & Used $3.25

22pc K-D Tools 1/2" Drive 12pt Metric Socket Set 10mm-32mm $45

Stanley 55-033, 10" Nail Claw $2.25

GreatNeck 3 Piece Nest of Saws 16" Panel Blade, 12" Compass Blade, 10" Keyhole Blade $2.25

True Angle Precision Measuring Tool 112 $2.25

U.S. Tape 3/4" x 16' & US Tape 1/2" x 6' $2.80

Crescent R212, 12" Tongue and Groove Pliers $5.51


I'm pretty pleased with these prices and quality of tools. Gotta love surplus!

 

[anndel]

The NOCO clamps are flimsy?

I have a NOCO GB70 and the clamps are heavy duty like a good quality jumper cable (Coleman US Made cables).

 

[Finky198]

I thought these fell into the abyss but they randomly arrived from china 6 weeks later came off ebay. I can't really complain for $4-5 bucks..... I used them today... splinters ****

 

[E46erak]

3 pc 84 tooth locking flex head gearwrench ratchets

I've had my eye on this set, mind getting some length measurements??

 

[66HertzClone]

I thought these fell into the abyss but they randomly arrived from china 6 weeks later came off ebay. I can't really complain for $4-5 bucks..... I used them today... splinters ****

Could you please post a link to those?

 

[Finky198]

They were on ebay, they came from china if you'd like then sometime in the next century... I'd spend a few extra bucks and find someone with a 100% feedback........

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1311.R1.TR3.TRC2.A0.H0.Xesd+tweezer.TRS0&_nkw=esd+tweezers&_sacat=0

 

[Wanna Ride]

They were on ebay, they came from china if you'd like then sometime in the next century... I'd spend a few extra bucks and find someone with a 100% feedback........

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1311.R1.TR3.TRC2.A0.H0.Xesd+tweezer.TRS0&_nkw=esd+tweezers&_sacat=0

Thanks. Just ordered a set from a US seller, and they should be here mid-next week.

 

[gonmad54]

I thought these fell into the abyss but they randomly arrived from china 6 weeks later came off ebay. I can't really complain for $4-5 bucks..... I used them today... splinters ****

I have the same set for putting valve keepers in and other than the shipping time they have been great.


Sent from my iPhone using Tapatalk

 

[GTO]

I've never figured out why guys want so many screwdrivers.

Hand in your tool card........

 

[upgrading]

 

[iMarZ]

Rebar Cutter!

 

[Strouty]

What size bar will it cut?

 

[thegroundpounder99]

Sent from my LG-H634 using Tapatalk

 

[Tyguy1209]

A set of lisle yap sockets cornwell guy had on sale Monday

Noid light set from the snapon guy this Wednesday.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[garthg]

The Germans (Wiha/Hazet) don't make screwdrivers with 3/16-inch slotted tips, they make them with 5 mm tips, so, yes, you need metric screwdrivers.

3/16 inch is 4.76 mm. So at 5 mm, the German screwdriver is .24mm or about 10 thousandths bigger.

I guess 10 thousandths of an inch justifies another tool purchase.

 

[NWill]

Picked this up yesterday. $315 brand new in box
View media item 62948

 

[OCD]

Hex bits for my work tool bag...

3/8 14.4v impact arrived,

 

[garthg]

I found a couple of old-stock Craftsman USA sockets in useful sizes at Sears. It's pretty much picked over these days and not much open stock left made in U.S. except for screwdrivers. Since the open stock sockets are all Made in China, why can't they at least reduce the prices to Chicom?

The other purchase is an LED AA flashlight from Auto Zone. (I was getting the "free" loaner A/C gauge set). $6 including the batteries, and it's really bright. It was $12.99 if you wanted it in black. I have no problem with pink. My manliness is not reflected in the color of my flashlight.

 

[CastleBravo]

I just picked this up off of CL for $40. Super sturdy. I've been looking for a rolling stand to put my cheapo drill press on.

Will post pics of it when it's mounted.

Sent from my iPhone using Tapatalk

 

[NUTTSGT]

I picked these up at a local surplus store. They were having a 25% off sale for customer appreciation. I grabbed them for the track box as my crank bolt is an ARP 12 point piece.

 

[48548]

Battery jump box. 1000 amps.

Rated for 6.0L engines.

Nice to have in the truck, but mostly bought it for a little peace of mind while out in the boat.

There are cheaper versions, but they don't have the amps or engine size rating.

The clamps are really flimsy as well.

I just got a gb150 and it seems really nice and the clamps/cables are really HD.

 

[AldeanFan]

Cyclo polisher I bought on e bay, made in USA. doesn't look like it's been used much, came wit a bunch of pads,
This is for polishing my vintage airstream.

 

[freudianfloyd]

Took advantage of the Meijer's BOGO Tekton tool sale today....

[/URL][/IMG]

 

[NoahG]

I picked these up at a local surplus store. They were having a 25% off sale for customer appreciation. I grabbed them for the track box as my crank bolt is an ARP 12 point piece.

Wow someone who uses 5/8" sockets. I feel like I never touch mind, and I feel like I'm always finding 5/8" sockets in clearance bins.


Sent from my iPad using Tapatalk

 

[amlv20]

Sent from my iPod touch using Tapatalk

 

[Tenex]

Buy this 3 piece kit for $24.99 on clearance or purchase the snips solely for $27.97.

 

[wiens80]

Sent from my iPhone using Tapatalk

 

[Chadwilliam1]

I have two of those callipers. One at work and one at home and they are excellent. I like the digital screen because I can take pictures of the measurements for reference and it is much easier to read than a dial on a picture.

 

[90zcar]

Just scored this stuff off of craigslist for $140 total.
All snap on.
36" breaker bar only one year old
Air hammer and 5 bits

Now to sell my current air hammer and some bits and re-coop some money back!!


Sent from my iPhone using Tapatalk

 

[iMarZ]

What size bar will it cut?

3/4"

 

[48548]

I am not sure I am impressed with the slop in the head. The chrome is better than snapon...

 

[Jarhead0408]

Just scored this stuff off of craigslist for $140 total.
All snap on.
36" breaker bar only one year old
Air hammer and 5 bits

Now to sell my current air hammer and some bits and re-coop some money back!!


Sent from my iPhone using Tapatalk

I'll say it. You ****!
I've wanted both of those for a while. Especially the breaker bar.