zendigital
Well-known member
Got the Makita 12v Max jigsaw, forgot to take the pics before playing with it so it got a bit dirty.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Got the Makita 12v Max jigsaw, forgot to take the pics before playing with it so it got a bit dirty.
anndel
Well-known member
Picked this up at a yard sale today for $15. Anyone know what years these were made? Don't need a creeper but for the condition and price it had to come home with me.
That looks exactly like the Snap On creeper I bought in 1985 and still have/use today.
Picked up this Milwaukee 4" hole saw for working onthe trailer project. I will use it later on for other future projects which I'm going to dread. You'll also notice the new garage art in the background.
OCD
Well-known member
Sanding board and a TLLF72,
Some of the organizer kit I ordered showed up,
Freebie,
I had been searching for a set of these,
Some of the organizer kit I ordered showed up,
Freebie,
I had been searching for a set of these,
Catmochanic
Active member
That Snap On knife block set is sweet! I have one myself, gets a lot of compliments. I have it sitting off to the side in my kitchen, use it for opening mail, Amazon boxes, etc. They are pretty sharp!
OCD
Well-known member
Was looking at my snap on bill from today, My dealer undercharged me $200... Lol...
I already texted him about it, and will pay the diff tomorrow... I am giving him that license plate cover for his Snap On truck too!!
I already texted him about it, and will pay the diff tomorrow... I am giving him that license plate cover for his Snap On truck too!!
Heavy Metal Doctor
Well-known member
We often leave 'em in the camper during summer travel season...always gets a conversation started at a group campground dinner.chrisnazzy
Well-known member
A couple weeks ago I was chatting on our new Snap On guys truck about some of the stuff I had seen that was at convention. The corporate guy riding with him was interested how I knew some of the things I did. I chose to leave GJ out of it and just told him I "knew a guy". Anyway fast forward to yesterday and my new driver says I have the stuff you ordered (curious since I didn't order anything). Apparently the corporate guy thought he would surprise me and had ordered me this FHKFD80A ratchet in my favorite color. Of course I had to buy it.
What I'm toiling over though is he also ordered me a SDDX70APB which is the 7pc. hard handled screwdriver set in Pearl Blue. I already own and use them in orange and had told him I would probably be interested in a Pearl Blue set to just tuck away as a collectors item. Now I'm not sure I want to sit on it @ $179 plus tax. He said he'd hold it for me until next week so I could think about it.
What I'm toiling over though is he also ordered me a SDDX70APB which is the 7pc. hard handled screwdriver set in Pearl Blue. I already own and use them in orange and had told him I would probably be interested in a Pearl Blue set to just tuck away as a collectors item. Now I'm not sure I want to sit on it @ $179 plus tax. He said he'd hold it for me until next week so I could think about it.
Attachments
Deadsquiggles
Well-known member
Tekton 18 piece Punch Set. Glad to see "USA" on the side of every punch.
d.mcfarland
Well-known member
Made by Wilde I believe. Or was it Grace?
upgrading
Well-known member
Good info on the punches.
I was not aware they were USA.
I was not aware they were USA.
a.heinzler
Member
- Joined
- Aug 8, 2016
- Messages
- 10
Fl80 and tl72. Got them this morning on bogo
Sent from my SAMSUNG-SM-G935A using Tapatalk
Rossco
Well-known member
Brand new and sealed, Local Classified bargain.
SO 3/8 drive deep, metric 6 pt.
SO 3/8 drive deep, metric 6 pt.
Last edited:
ihateminimumwage
Well-known member
- Joined
- Jan 26, 2012
- Messages
- 3,960
Wilde. I have the pin punches branded Wilde, and they're identical. Good to know Tekton is sourcing them.
FigureItOut
Well-known member
I had a dozen Zoro boxes arrive today, I'm now pretty deep into the Bosch LBoxx/Sortimo system.
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
four.cycle
Well-known member
the roll-pin punches certainly look like Wilde manufactured them.
Tekton outsources pliers from Wilde, so why not punches too?
Tekton outsources pliers from Wilde, so why not punches too?
Jeepster425
Well-known member
Got some hammers yesterday
Sent from my SM-G925T using Tapatalk
Sent from my SM-G925T using Tapatalk
stg454
Well-known member
What is the part number for those socket trays. They look great.
OCD
Well-known member
Part# KAHNSX6GN
MattVette89
Well-known member
I don't know what snap on charges for those, but if you don't need a certain color this is a link to the Hansen set:
https://www.amazon.com/dp/B001C6NL52/?tag=atomicindus08-20
https://www.amazon.com/dp/B001C6NL52/?tag=atomicindus08-20
upgrading
Well-known member
No COO, but cool.
Time to get a little snippy.
Wiss, then Proto.
Time to get a little snippy.
Wiss, then Proto.
Rossco
Well-known member
More.
Little and large. SF80A and its baby brother.
Little and large. SF80A and its baby brother.
LowCapacity
Active member
I grew tired of inaccurate import junk. 100% Made in USA. Cheap? No. Nice? Definitely.
Link? The ones on Amazon don't seem to show where they're manufactured, not sure if they're the same thing.
Sent from my iPhone using Tapatalk
I searched for these for months. Finally I contacted the manufacturer, and they told me they are only available in ONE place, https://www.jazebra.com/collections/made-in-usa
This is the only 100% Made in USA gauge they have. They have an "Assembled in USA" gauge that is about half the cost of this one. Accu-gage told me the parts in that one come from the USA, Poland, and Switzerland.
I informed the manufacturer how difficult they were to find, and they are working on that. As far as the site I linked to above, I placed my order at 1:30pm. They shipped same day.
There are three different fittings. Mine is the angled swivel.
Deadsquiggles
Well-known member
My Yost 460 6" vise and my Tekton soft face mallet with interchangeable faces came in today.
Gotta do some reinforcement to the workbench on the underside before I mount the vise though. It's just plywood.
Gotta do some reinforcement to the workbench on the underside before I mount the vise though. It's just plywood.
ron in sc
Well-known member
K-Dog
Well-known member
New boot laces.....
Kevlar. In case I shoot myself in the foot.
I guess...
Kevlar. In case I shoot myself in the foot.
I guess...
Strouty
Well-known member
I would be interested to see if they actually work. I know Kevlar is cut resistant and that is usually what does my laces in.
LowCapacity
Active member
Very interesting, thanks for the info! Damn, they are rather pricey, I would probably be fine with the assembled in USA one.
Sent from my iPhone using Tapatalk
ThrifyGarage
Well-known member
Two new tools this week:
Makita 18V Cordless XT248R Combo Kit
<a href="https://www.youtube.com/watch?v=IyVSyqxDSpA" target="_blank"><img src="https://4.bp.blogspot.com/-lj_iIq_5iQc/V-aC5d1NjaI/AAAAAAAAHTQ/1a1sjOSk16kn-Tvk1BMYBoArmt_GeAC8QCLcB/s1600/Makita.png" border="0" alt=""></a>
Fiskars 18 inch Pruning Saw
<a href="https://www.youtube.com/watch?v=oCwd2f8SzsU" target="_blank"><img src="https://1.bp.blogspot.com/-HayiDnqlHDI/V-aC5PmL0aI/AAAAAAAAHTM/h828YMUWQwkZ5ARYIPbTkKuOLaOZQK_awCLcB/s1600/Fiskars.png" border="0" alt=""></a>
Makita 18V Cordless XT248R Combo Kit
<a href="https://www.youtube.com/watch?v=IyVSyqxDSpA" target="_blank"><img src="https://4.bp.blogspot.com/-lj_iIq_5iQc/V-aC5d1NjaI/AAAAAAAAHTQ/1a1sjOSk16kn-Tvk1BMYBoArmt_GeAC8QCLcB/s1600/Makita.png" border="0" alt=""></a>
Fiskars 18 inch Pruning Saw
<a href="https://www.youtube.com/watch?v=oCwd2f8SzsU" target="_blank"><img src="https://1.bp.blogspot.com/-HayiDnqlHDI/V-aC5PmL0aI/AAAAAAAAHTM/h828YMUWQwkZ5ARYIPbTkKuOLaOZQK_awCLcB/s1600/Fiskars.png" border="0" alt=""></a>
Last edited:
New 3/8...I think this thing is just ****.. Need the 1/2 to finish the set..
Paid $60 for a used snap on 80 and $20 for this new... And I like this better
Cheers
Sent from my Nexus 6P using Tapatalk
Where did you find it for $20?
MattVette89
Well-known member
About a week ago I got a partial S-K short DBE offset wrench set that was missing three pieces. I've already found one on eBay, the 13-14. Still on the hunt for the missing two, but that's what I enjoy doing.
kospina
Member
JAKE-THE-TOOL-MAN
Well-known member
I put in an offer of $20, we'll see what happens
Yup, same seller excepted my $20.. Wondering what else I should get before they run outI put in an offer of $20, we'll see what happens
Sent from my Nexus 6P using Tapatalk
rick carpenter
Well-known member
Did you see the $21.99 on the rack, or on a sales sheet/online? Our Sears won't look up a sales or online price. Once you bring it to their attention though they'll honor it.
